Criteria

Text:
Content:
Display:

Results

Viewing 1021 to 1050 of 10150
2015-11-08
Article
AFRL is on the lookout for environmentally safer inorganic coatings solutions that will help protect and extend the life of aluminum landing gear.
2015-11-08
Article
The company continues to commit and breathe new life into its 40-year old fourth-generation fighter aircraft.
2015-11-08
Article
The PW1900G engine model for Embraer's E190-E2 recently flew on P&W's 747SP flying test bed at the company's Mirabel Flight Test Center in Quebec, with the engine family sited as a 'climate solution.'
2015-11-06
Article
Lightweighting and design customization are focus areas for SABIC's new material solutions for aircraft cabins.
2015-11-04
Article
Voice-activated commands have been engineered into new vehicles to help drivers keep their eyes on the road and reduce driver distraction. But a recent study by AAA's Foundation for Traffic Safety has found that voice command technology is not as effective as hoped.
2015-11-03
Article
A two-door muscle car prepped for year-round road conditions is the driving influence behind the fully functional Dodge AWD concept.
2015-11-02
Article
Doosan has expanded its wheeled excavator lineup with the Tier 4 Final DX210W-5 excavator, which replaces the -3 Tier 4 Interim model.
2015-11-02
Article
In collaboration with General Motors, ContiTech developed the fiberglass-reinforced polyamide strut mount for the new 2016 Cadillac CT6, reducing weight by 25% compared to an aluminum design.
2015-11-02
Article
Additional in-house testing capabilities and the hiring of 180 engineers and technicians underscores an ambitious strategy to reach $15B in annual sales by 2020.
2015-11-02
Article
Ongoing investments by parent Geely are pushing Volvo into the vanguard of autonomous driving, chassis sophistication, electrification...and even innovative reflective paint.
2015-11-02
Article
The knock on fusion power is that “It is the energy source of the future, and it always will be.” It has seemed like the same criticism could be levied against fuel cell vehicles, as their seemingly magical ability to turn stored hydrogen and atmospheric oxygen into motive power for personal transportation — with only water as a by-product emission —has remained tantalizingly out of reach for decades.
2015-10-30
Article
The usual gadgets and an extended chase scenes give the Aston Martin DB10 a major role in Spectre, the latest James Bond movie. “We used things like rapid prototyping and laser scanning, and we went directly from CAD to finished parts. Many components were machined, cut from solids so we did not have to wait for the creation of molds,” said Marek Reichman, Chief Creative Officer at Aston Martin.
2015-10-30
Article
The product development process used online crowdsourcing for design input for a contest hosted by 3D-printed car upstarts Local Motors.
2015-10-29
Article
Mahle claims to deliver improved top piston rings using a new CrN-based thermal spray coating for gasoline turbocharged DI engines.
2015-10-29
Article
Freudenberg-NOK Sealing Technologies recently won its first major order for its new generation of automotive seals. The frictionless Levitex seals will go into an engine for a global platform in 2017.
2015-10-29
Article
General Motors and LG have announced they are co-developing the 2017 Chevrolet Bolt electric car and LG is supplying the entire powertrain, battery, and other electronic subsystems. In this episode of SAE Eye on Engineering, Senior Editor Lindsay Brooke looks at the GM and LG collaboration. 
2015-10-28
Article
Skogforsk (the Forestry Research Institute of Sweden) has funded a KTH research initiative intended to help improve the suspension of forestry machines with the goal of achieving significant productivity improvements. KTH’s mission is to streamline the design process by validating the capability to simulate the operation of forestry machines under real-world operating conditions.
2015-10-27
Article
Prima Power has introduced the Laserdyne 430 Versa 3D fiber laser system with third-generation BeamDirector, designed for the typical laser processing needs of tool rooms, model shops, and R&D centers of manufacturers.
2015-10-27
Article
Claimed to be the “world’s most power dense variable speed electric motor,” Aeristech's novel boosting device was designed to solve a major challenge facing downsized engines.
2015-10-27
Article
The Nexcel oil cell is a removable one-piece engine oil tank and filter that integrates with the powertrain. But there is far more to it than that.
2015-10-27
Article
New series has an optimized internal geometry and a new glass-fiber-reinforced, prong-type, roller centered PEEK cage.
2015-10-26
Article
Just as engineers of consumer vehicles are being asked to shorten development cycles and improve performance, reliability, and safety, so are developers of off-highway vehicles, such as construction equipment and agricultural machinery.
2015-10-26
Article
Sophisticated digital power converters provide kilowatt-level power with configurability and remote communications that analog converters lack.
2015-10-26
Article
The German equipment supplier’s new PCHflex technology reportedly allows economical production of hot-stamped parts with high output performance, part quality, and maximum availability. A U.S. car manufacturer has already placed an order with Schuler for four production lines to manufacture lightweight parts using PCHflex, which is also suitable for producing parts on heavy-duty vehicles.
2015-10-23
Article
There's a revolution going on within the bones of new cars and trucks—new body structures that are much lighter and stronger for better fuel economy, safety, and handling. In this episode of SAE Eye on Engineering, Senior Editor Lindsay Brooke looks at the heroes of the revolution: aluminum die castings. 
2015-10-22
Article
Tobias Meyer provides a look inside the progressive automobile design and body development of the concept using bionic construction principles and additive manufacturing processes. The car is inspired by nature, additively manufactured, and an ultimate in lightweight design.
2015-10-22
Article
As more Information and connectivity enters today’s vehicles, design must be at the center.
2015-10-21
Article
The 2016 SUV is nearly 300 lb (136 kg) lighter than its predecessor, yet maintains its high safety standard thanks to a new-generation ACE body structure and the available Honda Sensing suite of advanced safety and driver-assistance technologies. Honda also debuted its digital product development-and-manufacturing process with the new Pilot.
2015-10-21
Article
Aston Martin is on a straight route towards the introduction of a pure electric model; the replacement of all its current sports cars, starting with the DB11 next year; the addition of a production version of its DBX crossover concept, and development of an all-new V12 engine.
2015-10-21
Article
More vehicle launches and faster product cycles are re-shaping the global industry landscape, and putting increasingly greater pressure on the supply base, according to IHS Automotive analysts.
Viewing 1021 to 1050 of 10150