Criteria

Text:
Content:
Display:

Results

Viewing 2701 to 2726 of 2726
2008-06-19
Article
Using quartz and sapphire components, high-powered lasers and scientific cameras researchers are able to see inside an operating engine—and that vision is proving to be a valuable aid for finding ways to reduce diesel emissions. Could this research hold the key to maximizing the benefits of low-temperature diesel combustion without incurring the typical emissions penalty?
2008-06-19
Article
Propelling Germany’s new armored tank, the Puma, will be a drive system from Tognum’s MTU Friedrichshafen. The engine for the system will be based on MTU’s Series 890 engines. It is a fourth-generation combat vehicle engine that evolved from applications in the Leopard I and II tanks and culminated in the U.S. Marine Corps Expeditionary Fighting Vehicle currently slated for deployment in 2015.
2008-06-19
Article
The Antarctic is as off-highway as off-highway gets. The coldest, driest, and windiest continent on Earth, 98% of its area is covered in ice to an average thickness of 1.6 km (1 mi). With limited maintenance facilities in Antarctica and the nearest workshop thousands of miles away, it is essential that maintenance requirements be kept to a minimum.
2008-06-19
Article
A cooled aluminum ring carrier piston from Mahle was developed for the heavy-duty range of commercial vehicle diesel engines with peak cylinder pressure of 200 bar (2900 psi).
2008-06-19
Article
Boasting increased loading power and performance for a wide range of applications, Komatsu ‘s WA250-6 wheel loader also features a hydrostatic transmission system, variable traction control, improved operator comfort features, and the company’s latest Komtrax technology.
2008-06-19
Article
Front differential lock, load-sensing hydraulics, and a new ACERT engine highlight Caterpillar’s new 938H wheel loader and IT38H integrated toolcarrier. The locking differentials are designed to provide dependable tractive effort in poor underfoot or tough loading conditions, and the load-sensing hydraulics can help both loaders deliver improved cycle times. Additional features help to aid machine health monitoring and service.
2008-06-19
Article
Dressta recently expanded its wheel loader lineup with the addition of the 555C Extra wheel loader, which features a new turbocharged diesel engine, single-phase torque converter, electrically controlled transmission, hydrostatic steering, and single-lever hydraulic controls.
2008-06-19
Article
MAN Nutzfahrzeuge opened a new assembly plant for heavy trucks in Niepolomice, near Cracow, Poland. The new plant will build heavy MAN trucks with gross weights over 16 t (18 ton), mostly from the MAN TGA WW range.
2008-06-19
Article
ZF signed a long-term contract with Hino Motors, a company in the Toyota Group, to supply 16,000 medium- and heavy-duty truck transmissions per year. The sales volume of the order will gradually increase from the current €24 million to more than €100 million in 2012.
2008-06-19
Article
The Eberspaecher Group, a supplier of automotive exhaust systems, has acquired Purem, a wholly owned subsidiary of Daimler, based in Unna, Germany. Purem has 135 employees and specializes in medium- and heavy-duty truck exhaust aftertreatment systems and exhaust system integration.
2008-06-19
Article
Carraro has opened a new plant in Qingdao, Shandong province, China. The new production site, representing an investment of €15 million, covers a total area of 23,000 m² (248,000 ft²) and is assigned to the production of transmission systems for stationary applications (such as escalators), integrated transmissions for forklift trucks and material handling, and axles for agricultural trucks and earth-moving machines.
2008-06-19
Article
Perkins announced plans to build a new manufacturing facility in China to produce small- and medium-size diesel engines. The manufacturing facility in Wuxi, Jiangsu province, would initially produce the Perkins 400 Series, a range of three- and four-cylinder, liquid-cooled, naturally aspirated, and turbocharged indirect-injection engines.
2008-06-19
Article
Case Construction Equipment formed a strategic alliance with the Construction Equipment Division of Hyundai Heavy Industries (HHI). The relationship will result in the extension of the Case lineup to include higher-capacity wheel loaders.
2008-06-19
Article
Introducing a unique combination of lifting performance and the 360°-swing functionality of an excavator, Volvo Construction Equipment will soon deliver to the market a new product class of pipelaying machines. Developed from a patented adaptation of Volvo excavator machines combined with modern lifting technology, the new pipelayers offer a number of technical advantages over traditional pipelaying dozers with side-based booms.
2008-06-19
Article
Used to feed pre-cut flat sheets through a configuration of four position-controlled programmable rollers, AddisonMckee’s ShellRoller machine can form the outer shell of a muffler or catalytic converter in virtually any round, oval, or asymmetrical configuration and is suitable for use with carbon steel, stainless steel, and titanium.
2008-06-19
Article
By some accounts, off-highway equipment engineers have been struggling to grasp the impact that the EPA Tier 4 standards—and the resulting compulsory phase-in of compliant equipment scheduled for 2008 to 2015—will have on their engineering design and development.
2008-05-18
Article
AVL, a provider of powertrain engineering, test systems, simulation software, and instrumentation products, expects to double its Michigan-based staff in the next five years in order to meet industry needs.
2008-02-14
Article
Kalmar is expanding its lineup of container handling equipment with the launch of the Autoshuttle, an automated self-loading shuttle carrier that can pick, place, and transport containers between ship-to-shore and yard stacking cranes.
2008-01-18
Article
Boeing and Textron have formed a teaming agreement to compete in the technology demonstration and system development phases and ultimately the production phase of the Joint Light Tactical Vehicle (JLTV) program for the U.S.
2008-01-18
Article
Club Car‘s newest electric vehicle, the Carryall 252 IQ Plus, incorporates a high-output charger and eight 6-volt battery configuration that provides a range of up to 86 mi (140 km) on a single charge.
2008-01-18
Article
Caterpillar has acquired the assets of Blount’s Forestry Division, and in a separate transaction, six Cat dealers agreed in principle to acquire certain assets of Pioneer Machinery, a distributor of forestry products in the southeastern U.S.
2008-01-18
Article
Hyster’s upgraded S80-120FT and H80-120FT lines of sit-down, counterbalanced lift trucks combine a robust powertrain with industrial-strength hydraulics, a re-engineered cooling system, and ergonomic features to allow operators to decrease downtime by as much as 30%, according to the company.
2008-01-18
Article
Designed to provide precision control for fine grading and leveling applications, Kobelco Construction Machinery America’s new SK260LC Acera Mark 8 hydraulic excavator features an innovative intelligent total control system that recognizes the operator’s moves and provides smooth hydraulic response.
2008-01-18
Article
BAE Systems and General Dynamics Land Systems signed a memorandum of understanding to work collaboratively in support of the U.S. Army’s Heavy Brigade Combat Team modernization plan, which will upgrade, modernize, and achieve commonality on BAE Systems’ family of Bradley fighting vehicles and General Dynamics’ M1 Abrams tanks, the primary vehicles of the Army’s heavy brigades.
2008-01-16
Article
A completely redesigned hydraulic system has boosted performance and enhanced the multifunctioning capabilities of Deere’s new 700J-Series track feller bunchers. The new hydraulic system features a load-managing system that sends power where it is needed the most, with up to 17% higher flow available to the feller attachment compared to previous models.
2008-01-16
Article
The word “big” takes on a whole new meaning when it is used to describe Caterpillar’s new 993K wheel loader. Built on an all-new platform, the 993K features Z-bar linkage, improved hydraulics, and an upgraded powertrain for solid penetration into the pile and high breakout forces. According to Cat, the increased performance and capacity result in a 15 to 20% improvement in productivity compared to the 992G this vehicle replaces.
Viewing 2701 to 2726 of 2726