Search Results

Article

FCEVs and hydrogen strategies target 2017

2014-12-03

At the recent 2014 L.A. Auto Show, various OEMs put their latest hydrogen fuel-cell electric vehicles on stage. Engineers developing FCEVs are working against overlapping regulatory clocks, and OEM collaborations are taking the some of the sting out of development time and costs.

Article

Advanced-chassis microcontrollers

2014-12-05

Renesas Electronics’ new RH850/P1x-C series is a high-end version of its RH850/P1x series of 32-bit automotive microcontrollers.

Article

Mazda enters subcompact crossover segment with 2016 CX-3

2014-12-03

The new stylish and refined Mazda2-based crossover made its debut at the 2014 LA Auto Show.

Article

Selective laser sintering system

2014-11-25

3D Systems has developed its fastest fab-grade selective laser sintering system yet, the ProX 500 Plus.

Article

Micro machining center

2014-11-25

The YASDA YMC 430 Ver. II micro machining center from Methods Machine Tools, Inc. is suitable for the ultra-precise manufacturing and high surface finishes required on small, complex features in components and dies or molds.

Article

SAE Eye on Engineering Quick Take: LA Auto Show Report

2014-11-25

Article

Automotive system-on-chipfamily

2014-12-09

Texas Instruments extends its automotive system-on-chip range with the TDA3x processor family, which is designed to help car manufacturers develop sophisticated advanced driver assistance systems applications that meet or exceed NCAP requirements, reduce collisions on the road, and enable a more autonomous driving experience in entry- to mid-level automobiles.

Article

'Reman' engine market steady, but complexity challenges production efficiency

2014-11-26

High-tech design causes time to remanufacture engines to nearly triple and adds to cost, while used engines remain a competitive factor. However, Purdue University data shows remanufacturing is far more energy efficient than installing a new powerplant.

Article

Voice recognition draws high interest but disappointment in J.D. Power survey

2014-12-16

A third of respondents say current systems are flawed, but are looking for natural voice recognition. Many express interest in specific semi-autonomous driving assist features, but only one-quarter was ready for autonomous driving.

Article

Flexible, ‘invisible’ assembly lines gain popularity

2014-12-16

Interest in automated guided vehicles to convey product from one station to another on the plant floor assembly line continues to grow as manufacturers look for greater flexibility, scalability, and sustainability in their operations, says RedViking.

Article

VW reveals hot new 10-speed DSG—and a cool dashboard design

2014-12-09

Volkswagen Group is on a technology blitz aimed at increasing overall vehicle efficiency. The IR-resistant dashboard materials and the 10-speed DSG transmission are in the production pipeline along with other innovations.

Article

Multi-core safety operating system

2014-12-09

EB tresos Safety Operating System multi-core from Elektrobit is a new operating system for automotive electronic control units.

Article

SEMA moves powertrain parts certification program to forefront

2014-11-24

SEMA develops step-by-step system in conjunction with California Air Resources Board to help participating members comply with emissions regulations. Clemson University I-CAR is an active participant, providing laboratory facilities for analysis to aid SEMA members who are aftermarket manufacturers.

Article

Toyota seeks industry joint effort to solve Takata airbag issue

2014-12-02

Article

Study shows multiple benefits of CO2 cooling in composites drilling

2014-12-01

Dry drilling of composite-Ti stack-ups via CO2 avoids the problems associated with liquid coolants used in fuselage hole drilling, while delivering benefits in productivity, tool life, and hole quality.

Article

Ford aims for new 'halo' products and more female engineers, says COO Barb Samardzich

2014-12-02

Ford has a lot riding on the new Mustang. It isn’t just another Ford model, it is a statement of capability and international intent, and no-one appreciates that more than Ford of Europe (FoE) Chief Operating Officer.

Article

Precision Hall-effect angle sensor ICs

2014-12-19

Allegro MicroSystems’ new family of contactless Hall magnetic sensors—the A1332 and A1334 high-resolution 360° angle sensor ICs—are based on magnetic circular vertical Hall technology.

Article

2015 F-150 aluminum body creates challenge for auto body shops

2014-11-18

"Craft shop" approach of low-volume, all-aluminum, high-end makes is too restrictive for America's best-selling vehicle. SEMA Show training classes by I-CAR demonstrate special techniques necessary and the learning curve for mainstream body shop technicians.

Article

Flat-plane crankshaft spins 'Voodoo' into Ford’s new Shelby V8

2014-11-18

Ford's choice of crankshaft type for the new 5.2-L high-performance V8 gives the new GT350 a thrilling and unique exhaust tone—but was nearly killed due to severe NVH issues.

Article

2015 Chrysler 300 gets upgrades

2015-01-22

A mid-cycle refreshening adds driver-assist technologies, more tuning options for the sport model, and the nameplate's first pairing of a V8 engine with an eight-speed automatic transmission.