Criteria

Text:
Content:
Display:

Results

Viewing 2761 to 2790 of 10097
2013-08-05
Article
ZF workers in South Carolina are assembling the world's first passenger vehicle nine-speed automatic transmission, a milestone that underscores the industry's march to improve vehicle fuel efficiency.
2013-08-05
Article
Engineers have demonstrated motorized vehicles that run on natural gas, pure hydrogen, biofuels, and electrons. By 2035, if present trends hold, vehicles using these alternative fuels will remain a tiny fraction of vehicles on the road. What could change in the next few years to drive adoption of one or more alternative fuels?
2013-08-05
Article
PI (Physik Instrumente)’s new hexapod micro-positioning system is a parallel kinematic platform that provides motion with six degrees of freedom.
2013-08-05
Article
The Connected Farm mobile fleet app from Trimble was designed to give managers and technicians access to fleet information from any location.
2013-08-05
Article
MEN Micro releases the PX1 PCI express mini card that uses a global navigation satellite system (GNSS) receiver to handle data transmissions from both GPS and GLONASS systems.
2013-08-02
Article
The decreasing relative cost of electronics and the pace of electronics development have significantly increased the need to adopt modern commercial off-the­-shelf computing architectures in avionics.
2013-08-01
Article
The key to sustainable space transportation is reliable, safe, and affordable vehicles that can be used over and over again in much the same way that global air transport is accepted today.
2013-08-01
Article
Constellium provides a close focus on how waste material is recovered and reused through the supply-chain manufacturing process up to the time when the airframe is eventually dismantled after a lifetime of service use.
2013-07-31
Article
PowerGenix announced on July 31 that it has entered into an innovation contract with PSA Peugeot Citroën Automobiles of France for evaluation of the supplier's nickel-zinc batteries as a replacement for lead-acid types in stop-start vehicles.
2013-07-31
Article
Verisurf’s seventh generation of its Verisurf X computer-aided inspection, reverse engineering, and assembly guidance software has model-based GD&T inspection technology at its core, and it supports more options for reporting and presenting data, including Microsoft Word, PowerPoint, and Adobe 3-D PDF Viewer.
2013-07-31
Article
The digital linear-ball-bearing gauging probe system from Measurement Specialties accurately measures manufactured parts during production for automated inspection screening and statistical process control data collection.
2013-07-31
Article
Collier Research Corp.’s Version 6.4.5 of HyperSizer composite structural analysis and optimization software not only runs faster than previous versions, but it also is based on a reconfigured core technology with built-in intelligence that produces more accurate answers with less user input.
2013-07-31
Article
Complementing the 6.7-L Cummins, 2014 Ram HD models receive Chrysler's "big" Hemi V8, and the 2500 series adds a more compliant five-link rear suspension.
2013-07-31
Article
Michigan is aiming for its first victory in next month’s 2013 World Solar Challenge with a new asymmetrical racecar that is ready for 1860 mi (2990 km) in the Australian sun.
2013-07-31
Article
Toray, an organic synthetic chemistry, polymer chemistry, and biotechnology company has acquired a 20% interest in Plasan Carbon Composites (PCC). Established in 2006, PCC recently announced that it will be supplying the 2014 Corvette Stingray hoods and two versions of removable roofs.
2013-07-31
Article
The next world-girdling version of the fuel-less flier will rely on featherweight polymers and composites.
2013-07-30
Article
The durable CAP-300 Series coolant level sensor from Gems Sensors & Controls was designed to perform over long periods of time in challenging environments and under rugged coolant applications.
2013-07-30
Article
TE Connectivity offers flexible, diesel-resistant FDR25S power cable wire designed for commercial and military aerospace, ground, and marine industries.
2013-07-30
Article
Crane Aerospace & Electronics’ down-leaded version of its Interpoint MFP Series point-of-load converters, available in both flanged and nonflanged packages, is a single-output, 16-W dc-dc converter that provides output voltages from 0.64 to 3.5 V from a source voltage of 3 to 6 V with up to 90% efficiency.
2013-07-30
Article
Smalley Steel Ring introduces a linear spring series with a selection of spring loads that react along a straight line.
2013-07-30
Article
Behr America’s Visco technology for engine-coolant pumps reduces power losses that affect fuel economy.
2013-07-29
Article
Stauff’s PPC-04-plus latest generation handheld hydraulic testers feature robust construction for use in harsh conditions.
2013-07-29
Article
In a partnership with Freightliner, Hirschmann Car Communication Inc. created a film antenna as part of an efficiency concept to make trucks more environmentally friendly and easier to maintain. The film antenna is integrated in the tractor body, making damage to the system impossible during operation, according to the electronics supplier; currently 20% of trucks’ conventional rod antennas require replacement within a year.
2013-07-26
Article
Friction bit joining (FBJ) bonds dissimilar metals strongly; cost-effectiveness in mass production remains to be demonstrated.
2013-07-25
Article
The fourth-generation SUV from Land Rover tops all other vehicles in J.D. Power’s 2013 APEAL study.
2013-07-23
Article
One week after announcing that it will beef up its electrification-engineering workforce, Ford on July 23 announced that it will hire more salaried employees company-wide by the end of CY2013. The company in January had indicated it would hire 2200 salaried personnel.
2013-07-22
Article
Bekaert Solaronics’ gas infrared systems are suitable for producers of pads for vehicle disc brakes.
2013-07-22
Article
The new features of MSC Software Corp.’s MSC Nastran 2013 deliver customization and broader solution capabilities that generate time savings in automotive and aerospace simulation workflows.
2013-07-19
Article
One example is a two-part prototype hood developed by Continental Structural Plastics (CSP) that has a low-mass SMC outer face and a strong carbon-fiber-reinforced SMC inner panel.
Viewing 2761 to 2790 of 10097