Criteria

Text:
Content:
Display:

Results

Viewing 2491 to 2520 of 10196
2014-01-28
Article
The C530 general-purpose graphics processing unit from Aitech Defense Systems combines improved processing and high-data-throughput capabilities with a rugged design that is suitable for C4ISR and advanced signal processing.
2014-01-28
Article
Data Device Corp.’s MIL-STD-1553 XMC cards now include front and rear I/O options, along with air- and conduction-cooled configurations, to support a range of embedded applications.
2014-01-28
Article
Crystek’s CVCO25CL-0902-0928 VCO operates from 902 to 928 MHz, with a control voltage range of 0.5 to ~3.5 V.
2014-01-27
Article
The India joint venture established between Tata Advanced Systems and Sikorsky Aircraft Corp. has announced that its S-92 helicopter cabin production in India has become 100% indigenous. The India operation is not only assembling cabins but also producing all parts needed for the assembly, before shipping the cabins to the U.S. for aircraft completion and customer delivery.
2014-01-27
Article
BASF Catalysts India Private Ltd. is expanding its mobile emissions catalysts production capacity in Chennai, India. Construction of a new 47,000-m² (506,000-ft²) facility commenced in December 2013, with operations startup expected in the first quarter of 2015.
2014-01-24
Article
A new SAE International book narrates the history of heavy-duty wheeled vehicles and presents the theory and calculations required to design them. Translated from Russian, the book summarizes the results of the authors’ academic research and experience, and presents innovative technical solutions used for electric and hydrostatic transmissions, steering systems, and active safety of these vehicles.
2014-01-24
Article
Tata Motors on Jan. 20 announced the launch of a new petrol engine family for Tata passenger vehicles called Revotron. The first to come out of the family of three- and four-cylinders is the four-cylinder Revotron 1.2T, a turbocharged unit delivering 140 N·m (103 lb·ft) from 1750-3500 rpm and 85 PS (84 hp) maximum power at 5000 rpm. 
2014-01-24
Article
Knorr-Bremse has expanded its production capacity in India in both the rail- and commercial-vehicle (CV) sectors with the opening of two new facilities in Palwal and Pune, as well as a new Development Center in Pune to be shared by its two divisions.
2014-01-23
Article
Affordable fuel-cell vehicles are coming to California, it says, as is a practical hydrogen refueling system
2014-01-23
Article
As evidenced on the show floor of the 2014 North American Auto Show in Detroit last week, new car models increasingly include features such as lane-departure-warning, adaptive-cruise-control, and parking-assist systems. 
2014-01-22
Article
Concerns about airborne diseases and flu pandemics coupled with increasing passenger concerns about environmental conditions are prompting some aircraft designers to take a closer look at ventilation systems. In many instances, improvements in air quality and cleanliness are being expedited by using design tools such as computational fluid dynamics (CFD).
2014-01-22
Article
Software company rFactor Pro developed software for a major F1 team to overcome the problem of driver-in-the-loop simulator dynamics reaction lag (latency); now it is cascading the solution into production vehicle simulators.
2014-01-22
Article
In parallel with the auto industry's car design and engineering challenges runs the vital function of testing. With the advent of EVs and HEVs it has acquired an increasingly complex dimension.
2014-01-22
Article
Thomas R. Stover, Chief Technology Officer for Eaton Corp.’s vehicle operations, recently began his term as SAE International’s 2014-2016 Vice President–Commercial Vehicle.
2014-01-22
Article
Cummins’ latest generation of engines ready to meet EPA Tier 4 Final emissions regulations extend from 49 to 675 hp (37 to 504 kW). New engines on display at ConExpo 2014 will include the QSF3.8 suited for compact equipment and the heavy-duty QSG12 for high-output machines.
2014-01-22
Article
The patented V-Raptor Bucket from Leading Edge Attachments, Inc. is a ripper/bucket combination for excavators and backhoes that allows the operator to rip rock, coral, or frozen ground with the maximum breakout force; pry out and carry stumps or cradle boulders; rip a clean narrow V trench for laying utilities; plus scoop and load material.
2014-01-22
Article
Of eleven minicars evaluated in recent Insurance Institute for Highway Safety (IIHS) "small overlap front" crash testing, only one achieved an "acceptable" rating. With "good" ratings in the testing organization's four other categories, the 2014 Chevrolet Spark qualifies as an IIHS 2014 Top Safety Pick—the only one among minicars.
2014-01-21
Article
Deister Machine plans to launch its new BFO-11224-EX2 mine-duty screen at ConExpo-Con/Agg 2014. The 12- x 24-ft (3.7- x 7.3-m) horizontal, single-deck unit delivers reliability and high-volume capacities in a variety of hard rock mining and mineral processing applications, the company claims.
2014-01-21
Article
The Hobart Element family of gas-shielded, flux-cored wires feature the lowest manganese levels of any similarly classified filler metal in the marketplace, the company claims, helping companies to address compliance with environmental regulations.
2014-01-21
Article
Bosch Rexroth is displaying its size 18 and 35 A1VO axial piston pumps at ConExpo. The pumps were developed specifically for price-sensitive applications and markets.
2014-01-21
Article
LADD Distribution has expanded its product offerings to include TE Connectivity’s AMPSEAL and AMPSEAL 16 connectors that are designed for harsh environment and critical applications in the off-highway, mining, and engine industries.
2014-01-21
Article
Texas Hydraulics’ hydraulic cylinders are now available as Electronic Advanced Subsystem – Integrated (EAS-i) actuators that have been designed to locally control the motion of the cylinder or a group of cylinders to perform a programmed function and respond to an input.
2014-01-20
Article
The system is a late step in Ford’s building-block approach to self-driving cars. Existing assistance systems will be integrated and use improved sensors, hardware, and software.
2014-01-20
Article
A brake pedal made from fiber-reinforced plastics debuts on a MY2014 sports car, and ZF's CEO says this application underscores the broad possibilities for lightweight materials.
2014-01-20
Article
When an ultra-luxury car reaches five-figures in annual sales, that’s an extra reason to take notice of each new model. And at the North American International Auto Show (NAIAS) in Detroit last week, Bentley staged the U.S. introduction of an “S” version of its Continental GT V8 grand touring coupe.
2014-01-20
Article
Company using new plastic technology to reduce size of heat sink on standard model, set for 2016 applications. Now offering “mini” for use with its navigation systems.
2014-01-20
Article
By stripping the electrified components and solar roof from the plug-in hybrid-electric Fisker Karma, VL Automotive intends to re-create the luxury sports car with unique body panels and power it with a supercharged V8 engine.
2014-01-17
Article
Bobcat Co. has released its first Tier 4 loaders, including a non-diesel particulate filter (DPF) engine solution. The non-DPF solution was achieved by designing an ultra-low particulate combustion (ULPC) engine.
2014-01-17
Article
Komatsu America Corp. has released a mobile app that allows owners to see critical machine information from the KOMTRAX fleet monitoring system on their Apple or Android smartphones or tablet devices in daily, weekly, or monthly time increments.
2014-01-17
Article
Topcon Positioning Group launched in 2013 a new web portal, Sitelink3D.net, designed specifically for general construction and engineering companies. The subscription web-based service—accessible via computer, tablet, or smartphone—is a real-time visualization and communications tool that allows users to access jobsite status, create new or update jobsite parameters, and view movement of machines on the job.
Viewing 2491 to 2520 of 10196