Criteria

Text:
Content:
Display:

Results

Viewing 2011 to 2040 of 10157
2014-06-24
Article
Aramco Services, a unit of Saudi Aramco, is opening a facility in Detroit to collaborate with automakers to produce both better fuels and better engines.
2014-06-24
Article
Chrysler is cascading its stop-start system in the NAFTA region to certain versions of the Jeep Cherokee and Chrysler 200 later this year, promising fuel-economy improvements of up to 3% (and a corresponding reduction in CO2 emissions) over the conventional models.
2014-06-23
Article
For over 40 years, Alpina has been BMW's 'outside' tuning house. Their CEO explains the synergies behind his company's success.
2014-06-23
Article
GE Aviation recently broke ground for its new machining factory in West Jefferson, NC. The new 80,000-ft² expansion will allow for increased capacity as the shop assumes additional machining work. The increase in volume is driven largely by orders for the new LEAP jet engine of CFM International, a 50:50 joint company of GE and Snecma (Safran) of France.
2014-06-23
Article
Boeing opened a new research and technology center to work with Brazilian researchers and scientists to develop aerospace technologies. The new Boeing Research & Technology-Brazil (BR&T-Brazil) center is focused on sustainable aviation biofuel development, advanced air traffic management, remote sensing, advanced metals and bio-materials, and support and services technologies.
2014-06-20
Article
What researchers at MIT refer to as an exotic state of matter--a “random solid solution”--affects how ions move through battery material.
2014-06-20
Article
Autonomous vehicles are a hot topic, most noticeably in the automotive world. But automated driving/operation is making significant headway in the off-highway realm as well, especially in mining applications. John Williamson of Komatsu America Corp. and Serge Lambermont of Delphi Electronics & Safety provide some insights on the topic.
2014-06-20
Article
JCB will be supplying high-speed backhoe loaders to the U.S. Army under a $50 million contract. The High Mobility Engineer Excavators (HMEEs) will be manufactured at JCB’s North American plant in Savannah, GA, and will be delivered by 2017.
2014-06-20
Article
The 2015 Mustang will feature a new design of an inflatable knee airbag, Ford announced June 20. Packaged inside the glove box, the new airbag provides protection comparable to its traditional counterparts, according to a release from Ford, but is 65% lighter and features an inflator that is 75% smaller, allowing for more room in the interior.
2014-06-20
Article
Omega’s PR-21 series of RTD (resistance temperature detector) sensors with M12 connector feature a welded 316L stainless steel housing and an integral 4-pin M12 connector for easy connection.
2014-06-20
Article
A cable installation simulator from W. L. Gore & Associates aids in evaluating the stress of installation on microwave airframe assemblies, thereby minimizing the risk of cable assembly damage or failure during installation.
2014-06-20
Article
Denso announced Thursday the promotion of Doug Patton to Executive Vice President of Engineering and Chief Technical Officer of Denso International America Inc. (DIAM). Additionally, Patton (SAE member, 1987) was also appointed Senior Director of Denso Corp.
2014-06-20
Article
CFM International has initiated ground testing of the first all-new LEAP-1B engine that will exclusively power the Boeing 737 MAX. CFM ran the engine for the first time on June 13, three days ahead of schedule.
2014-06-20
Article
A new electrohydraulic power steering system uses pump displacement control, eliminating throttling losses associated with hydraulic control valves by controlling the displacement of a variable displacement pump.
2014-06-19
Article
Airbus Group and Safran are further strengthening their relationship to propose a new family of competitive, versatile, and efficient space launchers, to serve both commercial and institutional needs.
2014-06-19
Article
Three high-performance thermoplastics from Victrex have been added to the Digimat-MX material and modeling database to accelerate the application development process while helping to minimize component weight and costs.
2014-06-19
Article
Elma Electronic Inc.’s S50J computing platform is a reliable and rugged, field-deployable system with abundant configurable I/O for maximum design versatility.
2014-06-19
Article
Lack of voice recognition and clumsy Bluetooth pairing were cited by owners of new vehicles as being among the most common type of problems they experience in the first 90 days of vehicle ownership, according to the J.D. Power 2014 Initial Quality Study (IQS).
2014-06-19
Article
A group of aerodynamicists from Tesla chose Exa’s PowerFLOW CFD software to examine two alternative methods of simulating aerodynamic performance in the presence of realistic on-road crosswind for the Tesla Model S sedan.
2014-06-18
Article
Motivated by the untapped potential of high-performance computing tools for engine simulations, personnel from Convergent Science, Caterpillar Inc., and Argonne National Laboratory combined forces to carry out a series of engine simulations including a simulation of nearly 34 million cells that is believed to be the largest-ever diesel engine simulation.
2014-06-18
Article
TRW Automotive has launched its next-generation seatbelt retractor, the Floating Spool 1 (FS1), which offers reduced weight (about 15% lighter) and smaller dimensions compared to previous systems, according to the company. Production of the global FS1 technology starts in the second quarter of 2014.
2014-06-17
Article
Industry experts at Hyundai and Ford address the opportunities and challenges involved with moving toward composite-intensive vehicles. The Ford Multi-Material Lightweight Vehicle project, a collaboration with the U.S. DOE and Vehma International, illustrates the automaker's efforts to move toward lighter-weight materials such as carbon fiber, aluminum, and advanced high-strength steels.
2014-06-16
Article
SAE International and the Consumer Electronics Association (CEA) have signed a two-year memorandum of understanding to build a cooperative partnership in the standardization of vehicle electronics and consumer electronics products to improve the driving experience.
2014-06-16
Article
Specialist concept vehicle builder Envisage Group has developed new techniques to facilitate greater functionality and value for money in the creation of efficient concept vehicles.
2014-06-16
Article
The 990K features a redesigned cab that delivers an enhanced operator interface and a quiet environment, and several new features to promote operator and maintenance technician safety and performance.
2014-06-16
Article
Ford Recruiting Manager Laura Kurtz discusses the hiring process at Ford and the types of skills that can help a candidate stand out from the pack.
2014-06-13
Article
Volvo is making Dirac's "active acoustic treatment of the listening space" technology (called Unison) available in the new XC90 with the Bowers & Wilkins audio system. According to Dirac, Unison co-optimizes the loudspeakers in frequency, time, and space for the "best possible bass integration and clarity."
2014-06-13
Article
Freudenberg-NOK Sealing Technologies has appointed Dr. Theodore G. Duclos (SAE Member, 1985) Acting President of its North America organization, effective June 11, 2014. He succeeds Bradley Norton, who recently announced his departure from the company to pursue other professional opportunities. 
2014-06-12
Article
The cause of the issue was an error in the process Ford engineers used to correlate wind-tunnel testing into their Total Road Load Horsepower (TRLHP) factor that is key to the vehicle fuel economy models that are ultimately submitted to the U.S. EPA.
2014-06-12
Article
MRO providers are discovering ways to innovate their procedures while remaining viable and profitable through the current downturn in government spending.
Viewing 2011 to 2040 of 10157