Criteria

Text:
Content:
Display:

Results

Viewing 9511 to 9540 of 10097
2008-07-08
Article
The WM536 series from Williams Controls is a heavy-duty throttle control that uses either contact or Hall-effect noncontact sensors to control electronic engines.
2008-07-08
Article
The Raptor pneumatic wrench from TorcUP offers continuous, repeatable torque with an accuracy of ±5%.
2008-07-08
Article
Williams Controls’ WM539 series is a versatile, compact design that uses either contact or Hall-effect noncontact sensors.
2008-07-08
Article
The compact, stainless steel M1-15 latch from Southco provides an option for enclosures that demand corrosion-resistant durability in a compact housing to fit smaller-profile doors and drawers.
2008-07-08
Article
Southco’s F6 line of concealed, removable-style hinges offers durable and corrosion-resistant performance, along with the aesthetics of concealed mounting and the convenience of tool-free door removal.
2008-07-08
Article
STAR-CD V4.06 from CD-adapco solves problems involving complex multiphysics and complicated geometries using stationary or moving meshes.
2008-07-08
Article
Wave 8.0 from Ricardo extends engine performance and controls simulation further for off-highway applications.
2008-07-08
Article
Encompassing a wide variety of latch styles, including compression latches, push-to-close latches, cam latches, cam locks, and multi-point latches, Southco’s key choice system is designed to accommodate the physical demands of diverse applications.
2008-07-08
Article
GGB Bearing Technology's sealed bearing cartridges offer a cost-effective, maintenance-free alternative to conventional greased bronze, hardened steel, and rolling-element bearings in off-highway applications.
2008-07-08
Article
Designed to extend the life cycle and reduce maintenance costs of class 7 and 8 heavy-duty truck kingpins, DX10 is a steel-backed bearing material from GGB Bearing Technology.
2008-07-08
Article
Lord offers its tactile feedback device in a product family approach.
2008-07-08
Article
The motion master suspension system from Lord provides integrated magnetorheological (MR) technology in the form of a damper filled with fluid that changes viscosity when exposed to a magnetic field.
2008-07-07
Article
A new center panel concept from TRW emphasizes a simplified human-machine interface.
2008-07-07
Article
Electroluminescent foils could be used to create new spatial lighting effects in cars, says Christian Schreiner, Managing Director of Schreiner VarioLight. To demonstrate some options of using electroluminescent lamps, the company worked together with automotive textile supplier Strähle+Hess to add blue ambient electroluminescent (EL) lighting to the interior compartment of a Porsche Cayenne.
2008-07-07
Article
According to InterRegs, the European Commission (EC) recently published a consultation document containing proposals for new minimum efficiency requirements on automotive air-conditioning systems. The proposal goes to the European Union’s goal of reducing fleet-average CO2 emissions from new passenger cars to 120 g/km by 2012.
2008-07-03
Article
The FIA Institute and Toyota, along with its luxury brand Lexus, revealed that they have “combined technology and expertise” in a move to enhance safety levels in high-speed racecar accidents.
2008-07-03
Article
An innovator in the rear-steering area, the company has applied more than 20 years experience in the vehicle dynamics arena to develop what it calls the world’s first four-wheel active steer (4WAS) system.
2008-07-03
Article
Because it is so different, the starlight headliner in the Rolls Royce Phantom Coupe gets lots of attention. Producing the illusion of a starry night did not require a technological breakthrough. Hundreds of tiny holes are cut into the headliner material, and fiber-optic lighting fills them with “starlight.”
2008-07-03
Article
In Frankfurt, Germany, the MOST Cooperation presented the third generation of its optical multimedia network protocol called MOST (Media Oriented System Transport). At 150-Mbps bandwidth, the new infotainment backbone offers the muscle for in-vehicle digital video streaming including HDTV.
2008-07-03
Article
Honda is challenging you to a race—“you” being every automaker and automotive supplier in the world, and more intimately, each and every engineer working for those companies; the race being one to “greener mobility,” with the ultimate goal of “dramatically reducing” CO2 emissions that contribute to global warming.
2008-06-30
Article
When tasked with developing a heatsink that works in either horizontal or vertical orientation for a dc power subsystem for a commercial airliner, rather than developing an entirely new heatsink geometry, which would have taken a large amount of time using conventional build and test methods, Crane Aerospace & Electronics used Flomerics’ Flotherm thermal simulation software to help meet the performance requirements.
2008-06-30
Article
Researchers at the German Fraunhofer Institute for Structural Durability and Systems Reliability (LBF) are convinced that next-generation lightweight aircraft designs will require intelligent load-monitoring technologies to make sure that the residual fatigue life and structural health of an aircraft can be realistically detected or calculated.
2008-06-30
Article
As accuracy requirements increase in the aerospace manufacturing industry, machine tool builders and control providers are responding in different ways. For CNC control provider Siemens Energy & Automation, it means taking volumetric compensation to new heights.
2008-06-30
Article
Aircraft manufacturers have always desired more flexible automated drilling solutions due to constantly changing requirements as technology advances, production rates fluctuate, and new products are introduced. This desire has become more evident in recent years as manufacturers embrace lean manufacturing techniques to streamline their processes.
2008-06-30
Article
ARP5941 (Aerospace Fluid Power–Contamination Sensitivity–Consideration for Establishing Test Procedures for Flight Control Actuators) was generated by SAE International’s A-6 Aerospace Actuation, Control, and Fluid Power Systems Committee to assure continued satisfactory performance of flight-critical servo-actuators under the maximum allowable particulate contamination in airplane hydraulic systems.
2008-06-30
Article
After three years of collaborative development with aerospace engine components suppliers seeking a drilling machine with higher speeds and more accuracy, Mitsui Seiki has launched the VLD-300 five-axis vertical CNC laser driller.
2008-06-30
Article
Omega Engineering’s CA150 handheld calibrator was designed to perform operation checks at regular inspection and maintenance of thermocouples, resistance temperature detectors, and instruments.
2008-06-30
Article
With the E123 Presetter, Lyndex-Nikken offers a precise high-tech device featuring a fixed rotating spindle that uses six mini bearings with radial concentricity error compensation.
2008-06-30
Article
The Agilent Medalist x6000 automated X-ray inspection (AXI) system from Agilent Technologies finds defects in solder joints to improve end-product quality and decrease warranty repair and scrap costs.
2008-06-30
Article
The Luxxor Video System from Gradient Lens connects to a range of rigid or flexible borescopes, including Hawkeyes, to capture, document, store, and share borescope images and detect product flaws early in the manufacturing process.
Viewing 9511 to 9540 of 10097