Criteria

Text:
Content:
Display:

Results

Viewing 9391 to 9420 of 10097
2008-07-11
Article
Against a backdrop of a world economic downturn, record gas prices impacting on airline travel, and massive order backlogs, Airbus management outlined its views on the coming years at its annual Technical Briefing.
2008-07-11
Article
Part of AMETEK’s NGI vehicular instrumentation system, CAN-Communicator (C-COM) is a compact 2-in graphic display module.
2008-07-11
Article
Programmable vertical Hall-effect technology used by Piher is only sensitive to the flux density coplanar with the integrated-circuit surface enabling low-cost contactless sensors to be manufactured for extreme enviroments.
2008-07-11
Article
Carling’s multiplex solutions feature the sending of simultaneous multiple parallel digital signals or information streams on a carrier in the form of a single, complex signal, and then recovering those separate signals at the receiving end.
2008-07-11
Article
Sure Power's family of dc/dc converters and battery equalizers is designed for 24-V vehicle applications.
2008-07-11
Article
Designed with BEI Duncan Electronics’ second-generation Hall-effect chip technology, the 9360 sensor features 360° rotation capabilities to meet a broad range of sensing needs, including rotary position for specialty vehicles.
2008-07-11
Article
As other industries are doing, aerospace is looking to emerging markets for low-cost assembly work. Bombardier Aerospace advanced the trend recently when it announced that workers at its plant in Querétaro, Mexico, would manufacture the composite structure for the Learjet 85 business jet.
2008-07-10
Article
The Duluth, MN-based manufacturer of single-engine, piston-powered aircraft has standardized on the PTC Product Development System to optimize its product development process.
2008-07-10
Article
Maplesoft has released the pilot version of "MapleSim", a multi-domain modeling and simulation tool that is designed to reduce the amount of time taken to bring products to market by using physical modeling techniques.
2008-07-10
Article
NASA and Alliant Techsystems (ATK) have unveiled a new vertical test stand at ATK’s facility in Promontory, UT, that will be used to test-fire the full-scale abort motor for the launch-abort system of the Orion crew exploration vehicle.
2008-07-10
Article
MTU Aero Engines has developed a combined noncontact blade vibration and tip clearance measurement system to prevent damage from occurring on development engines and to facilitate reliable prediction of the blade life.
2008-07-10
Article
Raytheon Co. and Sonju Industrial Inc. signed a three-year U.S. Department of Defense-sponsored mentor-protege agreement to work together on several Raytheon programs. Raytheon Missile Systems will mentor Sonju in the areas of lean manufacturing, information technology, human resources, and quality systems.
2008-07-10
Article
The Naval Air Warfare Center (NAVAIR) Division of the U.S. Navy awarded Vector Composites a Phase I Small Business Innovation Research (SBIR) contract to compare the properties of Quickstep and autoclave processing on one or more qualified carbon-fiber prepreg systems used by the U.S.
2008-07-10
Article
Expanding its wheel loader lineup, Terex Construction introduced its new TL210 compact wheel loader during ConExpo 2008. Building upon the successful design of the company’s popular TL260 compact wheel loader, the TL210 features a spacious operating cab, heavy-duty chassis, Terex cooling system with reversible fan, U.S. EPA Tier-3-compliant engine, and modified toolcarrier linkage.
2008-07-10
Article
The entirely new Caterpillar D7E contains more advances than just a new electric drivetrain. The ability to start from scratch eliminated some common annoyances that plague older designs.
2008-07-10
Article
Spirit Europe, the U.K.-based European headquarters of Spirit AeroSystems Inc., signed a contract with Airbus to design and produce a major wing structure for the A350 XWB (Xtra Wide-Body) program. Spirit will design and assemble the wing leading-edge structure primarily at its European facility in Prestwick, Scotland.
2008-07-10
Article
A line of precision orifices from O'Keefe Controls employs straight threads and O-ring nose seals. Features include improved installation and removal, while the nose seal prevents leakage around the straight threads.
2008-07-10
Article
MTS Systems has added a pulse width modulated (PWM) digital output option to its M-Series MH model of mobile hydraulic sensors, suitable for switching to digital without a CAN bus protocol.
2008-07-10
Article
The quartz MEMS gyro from Systron Donner Automotive measures a range of angular rates. Available either as a standalone unit or bundled into a multi-axis inertial measurement unit, the MicroGyro can be used by industries such as agriculture, construction, and a host of recreational vehicles.
2008-07-10
Article
The 318-V from Testo is an inspection scope with video output that features a miniature imaging sensor at the tip of a 42-in (107 cm) flexible shaft with a diameter of 0.4 in (1.0 cm).
2008-07-10
Article
A family of threaded check valves for installation in fittings or manifolds is offered by O'Keefe Controls.
2008-07-10
Article
The ReportLogiq flexible data reporting application from Mahle Test Systems helps end users study large volumes of vehicle test data via graphical reports.
2008-07-10
Article
A rail-mounted / fixed leak tester from MAHLE Test Systems tests for complete fluid system leaks on every vehicle built at the OEM plant in compliance with OEM quality or regulatory agency (EPA / CARB) requirements.
2008-07-10
Article
The hydraulic test stand from IAV Automotive Engineering is an effective tool for testing and developing automotive injection systems with integrated drive and fuel supply.
2008-07-10
Article
The Testo 330-2 LL commercial combustion analyzer measures O2, CO, NO, temperature, and pressure, and calculates NOx, CO2, efficiency, and excess.
2008-07-10
Article
The Formula SAE open-wheel racecar competition puts college teams on a quest to excel in engineering design and lay claim to victory in a number of static and dynamic events, including acceleration, skid pad, and autocross.
2008-07-10
Article
Goodrich Corp. received production contracts from Lockheed Martin and General Electric Aircraft Engines (GEAE) to supply pylons and nacelle systems for the U.S. Air Force C-5 Galaxy strategic airlifter Reliability Enhancement and Re-engining Program (RERP).
2008-07-10
Article
Kaman Aerospace Group Inc., headquartered in Bloomfield, CT, has acquired Brookhouse Holdings Ltd., a designer and manufacturer of composite aerostructures, aerospace tooling, and repair and overhaul services based in Darwen, Lancashire, England.
2008-07-10
Article
MTS Systems has expanded its portfolio of sensors designed for mobility industries, including agriculture, construction, open cast mining, material handling, municipal vehicles, military, and other off-road applications.
2008-07-10
Article
A tunable piston hydraulic spring/shock absorber suspension design from Parker Hannifin enables heavy-duty manufacturers to incorporate a fully active suspension into their equipment.
Viewing 9391 to 9420 of 10097