Criteria

Text:
Content:
Display:

Results

Viewing 9271 to 9300 of 10097
2008-08-07
Article
Gulfstream Aerospace Corp. reached an agreement with NetJets to supply 40 new Gulfstream aircraft. The agreement, valued at $1.9 billion, calls for four Gulfstream G450s and four Gulfstream G550s to be delivered to NetJets each year from 2012 through 2016.
2008-08-07
Article
Saab signed a memorandum of understandings (MOU) regarding industrial cooperation with Rheinmetall Schweiz AG and Pilatus Aircraft. Both agreements are connected to a possible Swiss acquisition of the Gripen fighter aircraft.
2008-08-07
Article
DSpace has added more AUTOSAR-compliant capabilities to two of its major automotive software development product lines. The firm's SystemDesk and TargetLink provide a seamless solution for development of AUTOSAR-compliant ECU (electronic control unit) software, focusing at the application level.
2008-08-07
Article
Lotus has decided to turn its new V6, naturally aspirated, mid-engined coupe from a project Eagle into a production Evora. The transformation came at the British International Motor Show in London and was necessary because the Eagle name was registered to another company.
2008-08-07
Article
SAE International is providing expertise to the U.S. FAA and to the aerospace industry at large regarding fuel-tank inerting, which is mandated for certain aircraft under a long-in-the-making agency rule published in the July 21 Federal Register.
2008-08-07
Article
The Boeing Co. and SkyHook International Inc. formed a teaming agreement to develop the JHL-40 (Jess Heavy Lifter), a commercial heavy-lift rotorcraft designed to address the limitations and expense of transporting equipment and materials in remote regions.
2008-08-06
Article
A weight-saving, anti-submarining rear-seat ramp system designed to reduce body-in-white (BIW) complexity across platforms has been announced by JSP.
2008-08-06
Article
Flow International, an exhibitor at the recent Westec show in Los Angeles, has announced plans to establish a single facility to design and build advanced waterjet cutting systems.
2008-08-06
Article
U.S. consumers had little interest in clean diesel engines in a J.D. Power and Associates study of emerging technologies that was released in June 2008.
2008-08-06
Article
Expanding into new areas is a big challenge for companies, one that offers high risk-reward trade-offs. Both risks and rewards are high in emerging markets, according to panelists who provided the Wall Street View on Strategy and Execution during the SAE World Congress.
2008-08-06
Article
The green theme continues as suppliers and automakers stay focused on developing eco-friendly powertrains.
2008-08-06
Article
PSA Peugeot Citroën is starting to develop a new family of 1.0-L three-cylinder petrol engines with relatively high specific power output of about 50 to 75 kW (67 to 101 hp) and the potential to achieve carbon dioxide emissions below 100 g/km without the need for additional technology.
2008-08-06
Article
Federation Internationale de l’Automobile (FIA), Formula One (F1) racing’s governing body, announced its plans late last year to reduce costs within the sport. Included in those plans are a series of measures to restrict aerodynamic testing.
2008-08-06
Article
Considered to be the largest of its kind in the world, Toyota Motor Corp.’s new driving simulator at its Higashifuji Technical Center in Shizouka, Japan, uses an actual vehicle inside a 23-ft (7.0-m) diameter dome, with a 360° concave video screen simulating a realistic driving environment.
2008-08-06
Article
Having reached a plateau in turbofan engine development in recent years, the scene is now being set for the next step up in conventional engine performance gains, with progress being made toward new-generation engines.
2008-08-06
Article
Testing is not just about proving or improving vehicle mechanical integrity and capability. It is also about saving money for OEMs and suppliers. A significant example of that is the outcome of the initial program for SUV crash testing using a newly designed “dipping sled” system at the Millbrook research and development facility in the U.K.
2008-08-06
Article
Siemens is introducing a fundamentally new way to create mechanical designs with 3-D solids modeling technology. Synchronous technology combines the best of constraint-driven techniques with direct modeling, according to Siemens.
2008-08-05
Article
Diesel, gasoline, and hybrid powertrains will have dedicated testing environments when an engineering service provider opens a new technical center later this year.
2008-08-05
Article
Although automotive plants are increasingly becoming populated with robots, humans are still relied upon to perform many tasks for proper vehicle assembly. Volkswagen AG has begun using Dassault Systèmes’ Delmia V5 Human software to ergonomically design its human assembly-line functions.
2008-08-05
Article
Virtual reality is playing a greater role in automotive development, letting drivers interact with different designs in near real-world operating conditions. Ford recently upgraded the hardware with Quantum3D’s fourth-generation Independence 4000, letting VIRTTEX engineers develop simulations that include human behavior.
2008-08-05
Article
For years, the Russians have provided spectacular military air displays featuring development versions of Sukhoi and Mig fighters, but for Farnborough these show-stoppers were absent, and instead the consolidating Russian aerospace industry concentrated on showing new civil airliners and helicopters.
2008-08-04
Article
As their use for many years attests, robots in manufacturing operations have advantages, such as precision, repeatability, consistency, multishift flexibility, reduced safety and health hazards, total cost reduction, and more effective use of consumable materials and energy. According to the Robotics Division of ABB Inc., only recently has the use of robots become more popular in the aerospace industry—especially for paint applications.
2008-08-04
Article
This year’s Farnborough International air show was low on new aircraft on display but provided a wealth of news on developing programs, new technologies including engines, and insight into how consolidation and restructuring are cascading down the supply chain.
2008-08-04
Article
DATAFORM, a project granted by the European Commission within the 6th Framework Programme, is developing what it says is an accurate and flexible technology for the manufacture of aircraft panels. Based on digitally adjustable multipoint tooling methodology, the technology is in the maturation process.
2008-08-04
Article
While casting about for a way to grant the U.S. Department of Defense’s wish for cost savings associated with an avionics control indicator it was supplying, ViaSat Inc. of Carlsbad, CA, ended up close to home with a company called Alloy Die Casting (ADC) about an hour’s drive north.
2008-08-04
Article
The Raptor was first seen at the New York Auto Show in March 2008, but if produced will not reach customers until 2010. Built entirely from scratch in only eight months, the not fully functional concept allows a preview of what the production car will look like.
2008-08-04
Article
Aircraft manufacturers are reducing tooling and equipment costs by building production parts with rapid prototyping equipment, a technique called direct manufacturing. Striving for more advances in this area, Boeing teamed up with a university and three industrial partners to set up the Direct Manufacturing Research Center.
2008-08-04
Article
Due to be officially unveiled at the Paris Motor Show in October, the Ka follows the general concept of its long-lived predecessor that was launched at Paris in 1996.
2008-08-04
Article
Two utility companies, Southern California Edison and DTE Energy, have joined a private-public group focused on delivering plug-in hybrid electric vehicles and other next-generation propulsion technologies to the marketplace.
2008-08-04
Article
A new service from OnStar allows stolen cars to be slowed via satellite and police intervention, lessening the chances of dangerous high-speed pursuits.
Viewing 9271 to 9300 of 10097