Criteria

Text:
Content:
Display:

Results

Viewing 8881 to 8910 of 10191
2008-12-15
Article
Kits contain clutch driven discs with enhanced damping features to provide satisfactory damping with matched-design solid flywheels.
2008-12-15
Article
Capable of handling large engine parts and new material types, Bekaert’s diamond-like carbon coating machine is used in both the automotive and racing industries.
2008-12-15
Article
California has adopted a sweeping set of measures, including some targeting the automotive industry, to reduce the amount of greenhouse gases emitted in the state to 1990 levels. CARB (California Air Resources Board) will promulgate the target-setting measures into specific regulations over the next two years.
2008-12-15
Article
The EPA recently approved rules that require heavy-duty trucks over 14,000 lb to be equipped with an onboard diagnostic system. The rule applies to trucks with a gasoline or diesel engine. Trucks under 14,000 lb already are under EPA mandate.
2008-12-15
Article
According to InterRegs, at the November session of the World Forum for the Harmonization of Vehicle Regulations (also known as WP.29), the draft global technical regulation (GTR) on pedestrian protection was finally adopted.
2008-12-15
Article
CARB (California Air Resources Board) on Dec. 12 adopted several measures designed to reduce emissions from heavy-duty diesel-powered trucks. The measures are contained in two sets of rules. The Statewide Truck and Bus rule will require owners of in-use heavy-duty diesel trucks to install exhaust filters under a phase-in schedule that calls for 100% compliance by 2014.
2008-12-15
Article
The Graco H-50 Foam Proportioner delivers up to 50 lb of foam per minute, allowing users to spray more product in less time.
2008-12-15
Article
Fanuc GE's Manual Guide i shop floor programming software features a Workpiece Setting Error Measurement function that enhances efficiency and quality when milling parallelopipeds.
2008-12-15
Article
Exhaust-gas-recirculation systems have drastically reduced emissions from diesel engines, but the systems can increase oxidation and acid in the lubrication system, thus shortening the useful life of the oil.
2008-12-15
Article
FreeFlight Systems’ RA 4000 radar altimeter, which recently achieved TSO-C87 authorization, provides precise altitude above-ground-level information from 0-2000 ft.
2008-12-15
Article
Rosenberg axial fans feature electronic commutation and other options while offering maximum airflow of up to 20,000 cfm, low static pressure, and low noise.
2008-12-15
Article
The Triflex RS from igus GmbH is a universal module developed for applications in cramped conditions.
2008-12-15
Article
The Nissin MAX i-Series Machining Centers from SNK America feature a large work envelope, access to five sides of a part, and part completion in just one setup for reduced labor and production time.
2008-12-15
Article
NI FlexRIO from National Instruments combines the flexibility of LabVIEW field-programmable gate array technology and high-speed, instrument-class I/O.
2008-12-15
Article
Projects requiring environmental monitoring are enhanced with Dickson Multi-Feature Digital Display Temperature & Humidity Data Loggers that feature both push-to-start and push-to-stop functions.
2008-12-15
Article
Trelleborg Sealing Solutions’ expanded CAD Service now includes inch-version CAD files for linear hydraulic seals.
2008-12-15
Article
Parker Fluid Control offers a grommet coil enclosure for its Series 204 and 304 solenoid valve lines. The series is a family of direct-acting solenoid valves for air and liquid (including light oil) applications in demanding commercial, industrial, and mobile markets.
2008-12-15
Article
The SR1V cable-extension transducer is part of Celesco Transducer Products’ SR1 series of products.
2008-12-15
Article
Grieve's No. 1005 electrically heated, 350ºF cabinet oven is suited for curing long composite parts.
2008-12-15
Article
PUD Series disconnectable, 2 mm (0.079 in) pitch, double-row crimp-style connectors from JST feature a positive-locking feature and a compact size to provide stable performance under high vibration, distortion, and unexpected external forces.
2008-12-15
Article
Rubber Industries offers custom rubber-to-metal bonding for pump impellers, diaphragms, bellows, seals, and gaskets used in various heavy-duty fluid applications.
2008-12-15
Article
The A10 Series relay offered by CIT Relay & Switch is restriction-of-hazardous-substances-compliant, can withstand operating temperatures up to 105°C (+221°F), and is immersion cleanable.
2008-12-15
Article
Brushless dc blowers from Rotron feature electronically commutated motor technology without brushes that extends service life up to 60,000 h on heavy-duty transit buses, construction vehicles, and off-highway equipment.
2008-12-15
Article
Axiomatic extends its signal conditioner line with the IC-DR-23, a 0-10 V dc to +/-200 mA output converter designed to convert any analog or pulse width modulated signal.
2008-12-15
Article
Telemetrix products from RT Logic enable full-loop communications system testing at radio frequency or intermediate frequency without requiring actual flights.
2008-12-15
Article
With a trunnion-style ball construction, Innovative Pressure Technologies’ compact switching ball valves deliver three-way performance at working pressures up to 6000 psi (41,369 kPa) in a bottom-ported, compact 3.20- x 1.25- x 2.5-in (81.3- x 31.8- x 63.5-mm) package.
2008-12-15
Article
Loadstar Sensors’ iPedal brake testing solution includes a sensor and an interface with optional application software to improve use with digital USB or analog 0-5 V dc output.
2008-12-15
Article
Setra Systems offers a compact 3100 Series pressure transducer for OEM applications including hydraulic and engine controls, industrial processes, off-highway equipment, compressors, and pumps.
2008-12-15
Article
ITT Interconnect Solutions redesigned the Trident Series T2P contact system for optimal contact alignment and improved performance.
2008-12-15
Article
Heyco offers a line of Snap-In Bumpers for through-hole protection, designed to fit standard mounting hole sizes of 0.312 in (7.9 mm).
Viewing 8881 to 8910 of 10191