Criteria

Text:
Content:
Display:

Results

Viewing 8791 to 8820 of 10150
2008-12-30
Article
Honda Motor Co. and GS Yuasa Corp. have agreed to create a joint venture for the production of lithium-ion batteries for applications with a central focus on hybrid-electric vehicles. The new company, which the two partners hope to officially establish by spring 2009 with a capitalization of about ¥15 billion, will also conduct research into Li-ion technology.
2008-12-29
Article
The U.S. NHTSA (National Highway Traffic Safety Administration) is delaying by one year implementation of a major upgrade to its light-vehicle crash-rating program. Changes to the agency's New Car Assessment Program (NCAP) will take effect for MY2011 instead of MY2010.
2008-12-23
Article
Averna’s tight synchronization of a few nanoseconds for phase diversity applications performed on its universal receiver tester (URT) represents a step forward in the generation, capture, and playback of RF signals.
2008-12-23
Article
Atmel offers its AVR microcontroller-based RF transmitter family ATA577x for remote keyless entry (RKE) applications.
2008-12-23
Article
Jet Edge's waterjet cutting systems feature SigmaTEK Systems' SigmaNEST Companion, which uses a wizard-based approach to allow waterjet operators with little or no CAD/CAM experience to design, edit, and nest parts quickly with little training.
2008-12-23
Article
Dyne-A-Mite IT Elite from Enercon etches, cleans, activates, sterilizes, and functionalizes a wide variety of difficult-to-treat conductive and non-conductive material surfaces.
2008-12-23
Article
Grote Industries’ ultra-nose-box is part of a series of the company’s products that addresses the trucking industry’s lighting and electrical needs.
2008-12-23
Article
Laser Design's 3-D laser scanning technology will be integrated with CMM systems from Wenzel-Xspect.
2008-12-23
Article
Designed for automatically dispensing room temperature vulcanizing (RTV) silicone, epoxy, lubricants, and adhesives, Dispense Work’s long stroke (LS) series dispensers can automate manual operation.
2008-12-23
Article
The Microballon Meter, Mix, and Dispense machine from Fluid Research Corp. dispenses microballons with little or no breakage.
2008-12-23
Article
Interlaken provides turnkey, fully automated hot stamping press systems to help meet the demand for stronger and lighter materials for volume manufacturing of automotive components.
2008-12-23
Article
NHTSA (U.S. National Highway Traffic Safety Administration) plans to issue a final rule on vehicle roof strength next spring, according to InterRegs. The rule as proposed would increase the load that could be withstood from 1.5 times the vehicle's own weight, as currently required, to 2.5 times its own weight. 
2008-12-23
Article
When the Chevrolet crossover debuts next summer, it will be offered with two new direct-injected (DI) engines—a 2.4-L four-cylinder and a 3.0-L V6. The 2.4-L is expected to deliver an estimated 30 mpg in highway driving, though EPA certification is pend­ing, placing the Equinox at the top of its segment in highway mileage.
2008-12-22
Article
Kia Motors began selling its all-new Kia Soul "urban crossover" late this year in 15 derivatives with two engine choices, two transmission choices, and five equipment levels.
2008-12-22
Article
Leoni will equip two of DAF’s truck series and its premium Paccar MX 12.9-L six-cylinder engine with wiring systems for five years, according to a recent agreement. Leoni will deliver its pre-formed, overfoamed harnesses (shown) to DAF’s European headquarters in Eindhoven, Netherlands, where the Paccar MX engine is produced.
2008-12-22
Article
The European Parliament in mid-December announced its support for a proposal to reduce emissions from trucks and buses of nitrogen oxides by 80% and particulate matter by 66% compared to the Euro V stage, which took effect in October.
2008-12-22
Article
General Motors Holden will build an all-new s­mall car in Australia starting in the third quarter of 2010 with support from Federal and South Australian Governments. Based on General Motors' global Delta small-car platform that underpins the upcoming Chevrolet Cruze and Opel, Vauxhall, and Saturn Astra, the new ­front-wheel-drive vehicle (shown in this concept sketch) will be built as a sedan and hatchback at the Elizabeth manufacturing facility in South Australia.
2008-12-22
Article
Renishaw's TONiC compact optical encoder is suited for a range of motion control applications in micromanufacturing systems.
2008-12-22
Article
The SL-V Safety Light Curtain from Keyence features highly visible indicators to aid setup and to view the current operating status.
2008-12-22
Article
Kontron's AM4101 Advanced Mezzanine Card, based on the 1.5-GHz dual-core Freescale PowerPC MPC8641D, delivers up to 2.3 MIPS/MHz computing performance.
2008-12-22
Article
The AA Series product line from UltraVolt is only 3.34 in3 yet achieves a 25 ppm temperature coefficient for customers with critical applications in variable-temperature environments.
2008-12-22
Article
The /PR family of ruggedized, plastic-encapsulated parts from Maxim Integrated Products is suited for high-reliability mobile military and aerospace applications.
2008-12-22
Article
Recognizing the criticality of cultivating American expertise in the development and production of lithium-ion batteries for automobiles, the U.S. Department of Energy is supporting a new government-industry alliance to do just that.
2008-12-22
Article
Microstar Laboratories' MSXB 086 signal interface module monitors up to 16 current loops, providing data for real-time processing or later analysis.
2008-12-22
Article
The series 660 embeddable accelerometers from IMI Sensors are suitable for continuous shock and vibration monitoring in high-volume and commercial OEM applications.
2008-12-22
Article
Perspective EVS, developed by Max-Viz for Cirrus Design Corp., is a multisensor system that blends visible light with traditional infrared imagery.
2008-12-22
Article
Schreiner ProTech features a laser sealing technology-based manufacturing process for airbag wraps that offers reliability and cost efficiency.
2008-12-22
Article
The European Parliament on Dec. 17 settled on binding long-range targets for climate impact and energy consumption. All industries are expected to contribute to achievement of year-2020 targets in three main areas.
2008-12-22
Article
General Motors Corp. aims to begin production of the engine for the Chevrolet Volt as scheduled in late 2010, but for now it is slowing construction of the plant where the 1.4-L four-cylinder will be built.
2008-12-22
Article
PSA Peugeot Citroën and energy company Electricité de France (EDF) have formed a collaborative partnership to support the development and marketing of electric vehicles and plug-in hybrids.
Viewing 8791 to 8820 of 10150