Criteria

Text:
Content:
Display:

Results

Viewing 8581 to 8610 of 10229
2009-02-10
Article
Powered by advanced lithium-ion batteries, Nissan Motor Co.’s electric-vehicle prototype is part of the company’s research and development program on zero emissions vehicles.
2009-02-10
Article
Tekscan offers the next-generation TireScan system with VersaTek scanning electronics and a high-resolution tire footprint sensor.
2009-02-10
Article
Lubrizol’s website, DCTfacts.com, provides news and information on the advancements of dual clutch transmission technology and discusses the fluid implications.
2009-02-10
Article
Amino North America produces aluminum body panels with the same sheet hydroforming technology used on steel panels for Pontiac Solstice and Saturn Sky hoods, doors, decklids, and bodyside outers.
2009-02-10
Article
Tested by 1500 organizations in 85 countries, the MapleSim high-performance multidomain modeling and simulation tool from Maplesoft shortens the product development cycle using physical modeling techniques.
2009-02-10
Article
Vector’s CANcardXLe is a bus interface for notebooks with an ExpressCard slot offering four independent channels.
2009-02-10
Article
LMS provides a combination of 1D and 3D simulation solutions for diesel powertrain challenges.
2009-02-10
Article
A hybrid vehicle battery test system from Sakor Technologies is energy-efficient and can perform various performance and durability cycling, including complex profiles and road load simulations.
2009-02-10
Article
RoboScan 600 HD from American Stress Technologies is a nondestructive, robot-driven inspection system for large windmill gears.
2009-02-10
Article
With its first application in a production car, ThyssenKrupp Steel’s hot-stamped tailored-welded blanks are used in the Audi A5 coupe and the new A4’s B-pillars’ rear-side members and tunnel reinforcements.
2009-02-10
Article
Hess Industries designs, engineers, and manufactures part-straightening solutions.
2009-02-10
Article
Fraunhofer provides an integrated coating technology package that includes the high-performance coating Diamor, the modular coating system technology LaserArco, customized engineering development, technology transfer, and support services.
2009-02-10
Article
D2T’s mono-cylinder engine offers customers a way to validate certain aspects of their design prior to launching prototypes.
2009-02-10
Article
With the demand for increased fuel efficiency, gear surface finish has become a priority for manufacturers.
2009-02-10
Article
The Lee Company introduces a miniature, self-retained, calibrated IMH insert orifice for liquids and gases.
2009-02-10
Article
USA Tolerance Rings, in partnership with Ididit, has developed a collapse ring for steering columns to prevent a driver from being impaled with the steering column during a front-end collision.
2009-02-10
Article
Hess Industries works with commercial diesel engine and exhaust aftertreatment device manufacturers on developing canning solutions to meet 2010 emissions requirements.
2009-02-10
Article
French automotive cluster Mov’eo is dedicated to “private cars and public transport, safe for man and his environment.”
2009-02-10
Article
Stork Fokker, a Stork Aerospace company, announced Feb. 9 that it has received a contract from Boeing for manufacture of CH-47F Chinook aft section major subassemblies. High-speed machining and other capabilities will be employed for the project at Stork Fokker’s facilities in Papendrecht and Hoogeveen, The Netherlands.
2009-02-09
Article
Rolls-Royce signed a memorandum of understanding with the Chinese Academy of Sciences (CAS) to undertake a joint research project, the focus of which is on developing manufacturing techniques and utilizing new materials for use in low-pressure turbine blades for the group’s gas turbine engines.
2009-02-09
Article
Naval Air Systems Command awarded the Bell Boeing Program Office Phase I of a two-phase Joint Performance Based Logistics (PBL) contract in support of the U.S. Marine Corps and the U.S. Air Force Special Operations Command to support the V-22 Osprey tiltrotor aircraft.
2009-02-09
Article
Electronic controls are making it safer for operators to stand on an aerial platform that lifts them 50 ft (15 m) in the air. Italian supplier Bluelift teamed up with TTControl to develop controls that stabilize the system and manage most other aspects of vehicle control.
2009-02-09
Article
The transition to Tier 4 engine technologies is prompting major changes in engine technologies. But it’s also triggering significant modifications in the way Caterpillar designs its engines.
2009-02-09
Article
Four new models from Cat mark the new mining truck model line, with some redesigned to allow for an ac-drive option. The trucks have been under development since 2004 and will be introduced over the next two years.
2009-02-09
Article
The SiC composite diesel particulate filter (DPF) from Ceramiques Techniques et Industrielles (CTI) and the IFP is made using a cost-effective manufacturing process that enables the production of many different sizes and shapes.
2009-02-09
Article
The Torductor-S torque sensor from ABB provides reliable and consistent noncontact torque measurement.
2009-02-09
Article
The Scuderi Group has announced its proof-of-concept prototype of the Scuderi Split-Cycle Engine.
2009-02-09
Article
MMT is an applied R&D company specializing in the development of electromagnetic circuits for Hall-effect position sensors, electric motors, and direct drive actuators.
2009-02-09
Article
Diversified Technical Systems' Slice Micro and Slice Nano are the firm's next-generation data recorders for the automotive test market.
2009-02-09
Article
A gaseous-fuel slave control unit from IAV provides the means for upgrading gasoline concepts to run on gaseous fuels quickly and cost-effectively without having to modify the existing engine control unit.
Viewing 8581 to 8610 of 10229