Criteria

Text:
Content:
Display:

Results

Viewing 8461 to 8490 of 10157
2009-02-16
Article
Always on the lookout for the best equipment, tooling manufacturer and subcontractor Burcas Ltd. installed its first five-axis machining center last year to supplement three-axis prismatic metal cutting and extensive multiaxis mill turning at its Birmingham, U.K., factory.
2009-02-16
Article
Prima North America has announced the signing of a cooperative development and marketing agreement with Scientific Applications and Research Associates. Under the agreement, SARA will work with Prima's Laserdyne Systems engineers and use a Laserdyne 795 system in the development of its proprietary product concept called Dynamic Automated Visual Inspection System.
2009-02-13
Article
AEZ’s Lascar wheel features a sporty, bicolor design that suggests movement and forward thrust even when it’s standing still.
2009-02-13
Article
Delphi will be supplying telematics transceivers to Caterpillar starting in 2010. Sensors and software in the transceivers will enable equipment to send and retrieve data using global positioning systems and wireless telecommunications technology.
2009-02-13
Article
East Penn Manufacturing and Nuvera Fuel Cells have teamed to provide ReadyPower units to the Susquehanna Defense Distribution Supply Depot (DDSP) in New Cumberland, PA. The fuel-cell/battery hybrid units have been installed into 20 Yale forklifts as part of a two-year-demonstration project operated by the Defense Logistics Agency. 
2009-02-13
Article
Danaher Motion’s rugged fifth-generation LS5 Navigator laser sensor was designed for harsh outdoor environments such as harbors and loading platforms and for cold storage.
2009-02-13
Article
The Southco R4-EM electronic rotary latch integrates electronic access convenience with secure rotary latch performance.
2009-02-13
Article
Alcoa Fastening Systems introduces the MP-3V and MP-4V next-generation Marson air/hydraulic riveters.
2009-02-13
Article
Mack Trucks Inc. and Volvo Trucks North America have chosen HUSS for their new retrofit diesel particulate filter solution to allow operators of older-model Mack and Volvo trucks to meet stringent new emissions requirements approved by California environmental regulators in December 2008.
2009-02-13
Article
The No. 1002 is an electrically heated, 20 x 20 x 20 in (508 x 508 x 508 mm), 500ºF (260ºC) cabinet oven from Grieve used for various test procedures.
2009-02-13
Article
Toyota will roll out a new U.S. vehicle telematics program inspired by the G-Book program it has been developing for Japan. Called Toyota Safety Connect, the cellular-based system will be a factory-installed, dealer-activated option on select Toyota models. It will be standard equipment—along with a dealer-activated upgrade called Enform—on some Lexus models with navigation systems, starting with the HS-250 h luxury hybrid.
2009-02-13
Article
The TXDIN1600 series from Omega Engineering is a new-generation DIN rail-mounted temperature transmitter.
2009-02-13
Article
Government-led consumer incentives for the purchase of low-emission vehicles will be the most important long-term enabler for automakers in Europe to meet tough CO2 standards, according to Jato Consult in a new report. 
2009-02-13
Article
A new European Commission regulation on pedestrian protection, (EC) No. 78/2009, was published Feb. 4, according to InterRegs, an online resource for global vehicle safety and emissions regulations. It repeals and replaces the current EC directives on pedestrian protection (2003/102/EEC) and on frontal protection systems (2005/66/EC).
2009-02-13
Article
A new EC regulation on hydrogen-fueled motor vehicles, (EC) No. 79/2009, was published Feb. 4. According to InterRegs, an online resource for global vehicle safety and emissions regulations, the new rule applies to passenger cars, multipurpose passenger vehicles, trucks, and buses that use hydrogen as a fuel, either in internal-combustion engines or fuel cells. 
2009-02-12
Article
Remanufactured brake shoes with PlatinumShield coating, just introduced by ArvinMeritor Inc. at the Technology & Maintenance Council event, provide enhanced corrosion protection and a three-year, 300,000-mi (483,000-km) warranty against rust-jacking.
2009-02-12
Article
Mitsubishi is entering the regional jet market, focusing on reduced fuel consumption and reduced noise. The company is finishing up its designs and preparing for first flight in 2011.
2009-02-12
Article
Aircraft manufacturers continue to devise new ways to reduce manual labor, turning to robots for repetitive jobs such as drilling holes. Research projects are helping improve precision so robots can be used for even the most demanding applications.
2009-02-12
Article
Interstate Specialty Products offers a lightweight, energy-absorbent Thermal Insulation Foam with a durable skin that can be die-cut to specification.
2009-02-12
Article
Otto’s HTWM Hall-effect miniature proportional thumbwheel offers the same performance as the standard HTW thumbwheel with a shorter behind-panel depth of 0.96 in (24 mm).
2009-02-12
Article
Bosch Rexroth offers a line of flow diverter valves with flows up to 60 gal/min (227 L/min) and pressures up to 5000 psi (344 bar).
2009-02-12
Article
SigmaNEST Companion CAD/CAM nesting software from Jet Edge for precision waterjet cutting systems uses a wizard-based approach to allow waterjet operators with limited CAD/CAM experience to design, edit, and nest parts.
2009-02-12
Article
Nylok’s turquoise Precote 85 is a high-strength preapplied fastener adhesive that offers controlled torque and vibration resistance under high-temperature applications.
2009-02-12
Article
Binder-USA's M8 field-attachable connectors have an option of solder termination for both metal and plastic versions.
2009-02-12
Article
Innovative Pressure Technologies' floating ball valves feature a two-way floating ball design to deliver cost-effective, reliable operation in most on-off process applications up to 10,000 psi.
2009-02-12
Article
The Aeronautical Design and Development Center (ADDC), a design and development center in India operated by Saab and Tata Consultancy Services, has been awarded its first contract by Saab for the Swedish company's next-generation Gripen fighter jet.
2009-02-12
Article
The LLB130 miniature load button from FUTEK Advanced Sensor Technology includes a USB output option, eliminating the need for amplifiers, filters, and multimeters.
2009-02-12
Article
Sandvik Coromant's Aerospace Engine Solutions package contains five standard products for the aerospace engine industry.
2009-02-12
Article
EPALLOY 8370 A85 from CVC Thermoset Specialties is an epoxy phenol novolac resin supplied at 85% solids in acetone; the product maintains performance at higher temperatures, which is a critical feature for electrical components that have evolved to higher performance at a smaller physical size.
2009-02-12
Article
Fox Electronics' XpressO oscillator series includes a 2.5-V LVPECL VCXO version with an industry-standard 7 x 5 mm package size and a frequency range from 0.75 MHz through 1.0 GHz.
Viewing 8461 to 8490 of 10157