Criteria

Text:
Content:
Display:

Results

Viewing 8371 to 8400 of 10315
2009-04-20
Article
Hardware in the loop tools are extending their reach, addressing a broader range of design challenges. dSpace rolled out a program that lets engineers do more planning during the conceptual phases of a program, while National Instruments divulged that it’s broadening its HIL offerings.
2009-04-20
Article
The transition from lead solder to lead-free alternatives occurred a few years ago, but it is still causing problems. Aircraft suppliers who need to know whether parts have lead are getting some help from i-Nalysis, which is marketing a comparatively low-cost portable tester that determines the makeup of solder alloys on chips.
2009-04-20
Article
As the featured speaker to open the 2009 SAE World Congress, California Gov. Arnold Schwarzenegger praised the Detroit Three automakers for the changes they're making and came out strongly for consistent U.S. energy policy.
2009-04-20
Article
A123Systems’ Hymotion L5 Plug-in Conversion Module (PCM) is a supplemental battery system that converts the Toyota Prius hybrid electric vehicle into a plug-in hybrid electric vehicle. Field performance is reviewed in a paper at the 2009 SAE World Congress slated for April 20-23 in Detroit.
2009-04-20
Article
A five-door production hatchback served as the base point for engineers to design and develop a range-extended electric vehicle propulsion system.
2009-04-20
Article
Premixed charge compression ignition diesel engines have the potential to achieve homogeneous mixture in the cylinder, resulting in lower NOx and PM as well as performance improvements, though studying the technology requires a complex calibration process.
2009-04-20
Article
Engineers at Nissan Technical Center North America have developed an alternative test method for road load durability evaluations of a pickup truck rear bed, independent of proving ground or road simulator full-vehicle durability testing.
2009-04-20
Article
SAE International soon will put out for ballot a standard relating to vehicle electrification, helping to lay the foundation for greater sales of plug-in hybrid and pure-electric vehicles. J1772 spells out the specifications for the coupler through which current will flow into the vehicle from an outside source.
2009-04-16
Article
Despite the intervening economic turmoil at GM, the company thought it time to reveal at the 2009 New York International Auto Show the initial results of its newly revealed, 18-month partnership with Segway. The first prototype of the team’s city people-pod concept, the PUMA, was on display amid the broad, deeply carpeted aisles of the Javitz Convention Center.
2009-04-16
Article
General Motors expanded its family of compact crossover SUVs built on the corporate Theta platform with the announcement of the GMC Terrain, a derivative that is styled to look more like the traditional body-on-frame trucks that comprise most of GMC’s portfolio.
2009-04-16
Article
Not only does the Nuvis concept get power from Hyundai’s home-grown parallel hybrid propulsion system, but its structure embodies the flowing, hydrodynamic forms that characterize the philosophy at the firm’s design center in Irvine, CA.
2009-04-16
Article
Acura plans to join BMW’s X6 in the market intersection of the coupe, hatchback, and SUV segments with a production version of the ZDX concept the company showed at this month's New York International Auto Show, reaching showrooms by this fall.
2009-04-16
Article
The 2011 Jeep Grand Cherokee looks little different from the current model, but under the familiar-looking sheetmetal lies an entirely new vehicle that shares hardware, not with previous versions of the Grand Cherokee, but with the Mercedes-Benz ML-Class SUV.
2009-04-08
Article
Despite the global economic downturn, China has reached deep into its pockets to further encourage its domestic car manufacturers in their hybrid and alternative fuel vehicle development. The government has invested almost $1.5 billion to put 1000 such vehicles in each of 13 major urban areas in a highly visible public demonstration.
2009-04-08
Article
Over the last six to eight years, the complex business of digitally planning, simulating, and integrating vehicles, processes, and production sites has made the shift from a new approach to a practical reality.
2009-04-08
Article
Fiat leads the pack of top-selling automobile manufacturers in Europe with the lowest carbon dioxide emissions in 2008, and as an overall company, Fiat is on track to meet the 2015 EU-set level of 130 g/km. Peugeot met the 2008 standard as well, while BMW showed significant improvement from 2007.
2009-04-07
Article
At a recent meeting to assess the service industry's readiness to deal with the new A/C refrigerant, EPA urges industry for a phase-out of R-134a to beat or at least match the European Community's regulations.
2009-04-07
Article
Caterpillar and Navistar International Corp. have formed a strategic alliance to produce Cat heavy-duty vocational trucks for North America. Cat and Navistar have already started the co-development of the new line of trucks, which will be manufactured in Navistar's Garland, TX facility and be sold and serviced through the Cat North American Dealer network.
2009-04-06
Article
Raymond Corp. turns to Design for Manufacture and Assembly (DFMA) software when performing a detailed part count reduction study and product design optimization of its Model 7400 Reach-Fork forklift truck.
2009-04-06
Article
While engineering groups are bringing together different disciplines to solve the growing need for mechatronics solutions, they may also need new interdisciplinary engineering tools to capture multiphysics.
2009-04-06
Article
Several years ago, U.S. Air Force maintenance technicians at Tinker Air Force Base discovered that an additive designed to remove water from traditional JP8 jet fuel was unexpectedly causing paint to peel off the inside of B-52 fuel tanks. The main concern was that the paint chips could clog the fuel filter and cause an engine flameout.
2009-04-02
Article
The self-cleaning Model 640S from Sierra is designed for demanding industrial gas mass flow measurement applications.
2009-04-02
Article
Futek Advanced Sensor Technology’s LTH300 Donut/Thru hole load cell with USB output option eliminates the need for an analog amplifier, power supply, and display equipment.
2009-04-01
Article
Hybrid trucks are inching into the marketplace, but there are still plenty of questions about their viability. Despite these questions, the market is evolving as customers buy a few test vehicles and truck developers gear up for the future.
2009-04-01
Article
MAG Cincinnati's E Mill is a solution for the machining of long, small-cross-section parts used in aerospace, construction, shipbuilding, and wind power.
2009-04-01
Article
NHTSA (National Highway Traffic Safety Administration) has released MY2011 CAFE standards for passenger cars and light trucks. The combined average will be 27.3 mpg, a 2.0 mpg increase over MY2010. With implementation of a revised CAFE structure that takes into consideration vehicle size, the minimum fuel-economy requirement for passenger cars will differ between automakers.
2009-04-01
Article
The Mida Laser 75P noncontact programmable tool setting system from Marposs incorporates a protection system with air tunnel effect, powerful integrated microprocessor for best performance under coolant, active drip rejection filter, and enhanced noise reduction with double filtering technology.
2009-04-01
Article
CORSA Performance Exhausts designs improved axle-back exhaust systems for the 2009 ZR1 and Z06 Corvettes.
2009-04-01
Article
The Series 113B and 102B frequency tailored integrated circuit piezoelectric (ICP) and charge output piezoelectric pressure sensors from PCB Aerospace & Defense have a 1 µs response time, with resonant frequencies above 500 kHz.
2009-03-31
Article
GaGe’s Razor CompuScope 16XX multichannel digitizers feature up to 4 GB of onboard acquisition memory and sampling speeds up to 200 MS/s.
Viewing 8371 to 8400 of 10315