Criteria

Text:
Content:
Display:

Results

Viewing 8161 to 8190 of 10094
2009-04-16
Article
Acura plans to join BMW’s X6 in the market intersection of the coupe, hatchback, and SUV segments with a production version of the ZDX concept the company showed at this month's New York International Auto Show, reaching showrooms by this fall.
2009-04-16
Article
The 2011 Jeep Grand Cherokee looks little different from the current model, but under the familiar-looking sheetmetal lies an entirely new vehicle that shares hardware, not with previous versions of the Grand Cherokee, but with the Mercedes-Benz ML-Class SUV.
2009-04-08
Article
Despite the global economic downturn, China has reached deep into its pockets to further encourage its domestic car manufacturers in their hybrid and alternative fuel vehicle development. The government has invested almost $1.5 billion to put 1000 such vehicles in each of 13 major urban areas in a highly visible public demonstration.
2009-04-08
Article
Over the last six to eight years, the complex business of digitally planning, simulating, and integrating vehicles, processes, and production sites has made the shift from a new approach to a practical reality.
2009-04-08
Article
Fiat leads the pack of top-selling automobile manufacturers in Europe with the lowest carbon dioxide emissions in 2008, and as an overall company, Fiat is on track to meet the 2015 EU-set level of 130 g/km. Peugeot met the 2008 standard as well, while BMW showed significant improvement from 2007.
2009-04-07
Article
At a recent meeting to assess the service industry's readiness to deal with the new A/C refrigerant, EPA urges industry for a phase-out of R-134a to beat or at least match the European Community's regulations.
2009-04-07
Article
Caterpillar and Navistar International Corp. have formed a strategic alliance to produce Cat heavy-duty vocational trucks for North America. Cat and Navistar have already started the co-development of the new line of trucks, which will be manufactured in Navistar's Garland, TX facility and be sold and serviced through the Cat North American Dealer network.
2009-04-06
Article
Raymond Corp. turns to Design for Manufacture and Assembly (DFMA) software when performing a detailed part count reduction study and product design optimization of its Model 7400 Reach-Fork forklift truck.
2009-04-06
Article
While engineering groups are bringing together different disciplines to solve the growing need for mechatronics solutions, they may also need new interdisciplinary engineering tools to capture multiphysics.
2009-04-06
Article
Several years ago, U.S. Air Force maintenance technicians at Tinker Air Force Base discovered that an additive designed to remove water from traditional JP8 jet fuel was unexpectedly causing paint to peel off the inside of B-52 fuel tanks. The main concern was that the paint chips could clog the fuel filter and cause an engine flameout.
2009-04-02
Article
The self-cleaning Model 640S from Sierra is designed for demanding industrial gas mass flow measurement applications.
2009-04-02
Article
Futek Advanced Sensor Technology’s LTH300 Donut/Thru hole load cell with USB output option eliminates the need for an analog amplifier, power supply, and display equipment.
2009-04-01
Article
Hybrid trucks are inching into the marketplace, but there are still plenty of questions about their viability. Despite these questions, the market is evolving as customers buy a few test vehicles and truck developers gear up for the future.
2009-04-01
Article
MAG Cincinnati's E Mill is a solution for the machining of long, small-cross-section parts used in aerospace, construction, shipbuilding, and wind power.
2009-04-01
Article
NHTSA (National Highway Traffic Safety Administration) has released MY2011 CAFE standards for passenger cars and light trucks. The combined average will be 27.3 mpg, a 2.0 mpg increase over MY2010. With implementation of a revised CAFE structure that takes into consideration vehicle size, the minimum fuel-economy requirement for passenger cars will differ between automakers.
2009-04-01
Article
The Mida Laser 75P noncontact programmable tool setting system from Marposs incorporates a protection system with air tunnel effect, powerful integrated microprocessor for best performance under coolant, active drip rejection filter, and enhanced noise reduction with double filtering technology.
2009-04-01
Article
CORSA Performance Exhausts designs improved axle-back exhaust systems for the 2009 ZR1 and Z06 Corvettes.
2009-04-01
Article
The Series 113B and 102B frequency tailored integrated circuit piezoelectric (ICP) and charge output piezoelectric pressure sensors from PCB Aerospace & Defense have a 1 µs response time, with resonant frequencies above 500 kHz.
2009-03-31
Article
GaGe’s Razor CompuScope 16XX multichannel digitizers feature up to 4 GB of onboard acquisition memory and sampling speeds up to 200 MS/s.
2009-03-31
Article
Truck body designers are responding to the economic downturn with cutbacks that are more often associated with post-holiday resolutions: They are working to slash pounds. Weight is becoming a central element in truck body designs, driving a transformation as aluminum and composites replace steel.
2009-03-31
Article
The Chainflex CF Robot from igus is a shielded robot cable for applications involving high levels of torsion.
2009-03-31
Article
The FRCIR connector from ITT Interconnect Solutions combines Ethernet and MVB cable lines in a single interconnect package.
2009-03-31
Article
Measuring 0.4 mm (0.016 in), the contact pitch of Yokowo's vertical cable connector cable is claimed to be the smallest in the industry.
2009-03-31
Article
No. 990 is an electrically heated, 500ºF (260ºC) walk-in batch oven from Grieve used for curing composite materials in vacuum bags.
2009-03-31
Article
The expansion of the operating temperature range for Transducers USA’s line of 400 Hz electromechanical audio alert buzzer products makes them suitable for use in extreme high- or low-temperature environments and on equipment operating in harsh conditions.
2009-03-31
Article
Celesco Transducer Products offers the SR1M cable-extension transducer as the third in the SR1 series of rugged, flexible string pots that offer industry standard position feedback signals.
2009-03-30
Article
The TrueTILT dual-axis, wide-angle electrolytic tilt sensor from the Fredericks Co. has been redesigned and is available in two different angle and linear ranges.
2009-03-30
Article
The Stretchybelt from Hutchinson Belt Drive Systems is a maintenance-free, self-tensioned Poly V belt that features cost savings with the elimination of tensioning systems.
2009-03-27
Article
The sound-deadening headliner in the 2010 Buick LaCrosse uses padding made from discarded cardboard packaging containers. It is the first General Motors application of Federal-Mogul's QuietShield GRN. Applications for QuietShield GRN are also appropriate for other industries, including aerospace.
2009-03-27
Article
At the Geneva Motor Show, the station wagon version of Seat's new Exeo sedan made its debut, but also displayed was an ultragreen concept version of its five-door Leon.
Viewing 8161 to 8190 of 10094