Criteria

Text:
Content:
Display:

Results

Viewing 8101 to 8130 of 10157
2009-05-01
Article
The hermetically sealed version of Omegadyne’s MM Series micromachined silicon pressure transducers features all welded stainless steel construction, 316 wetted parts, and glass-to-metal seals at the electrical outlets.
2009-05-01
Article
Versions of the Daily parallel-hybrid cargo van, EuroCargo parallel-hybrid light truck, and Citelis serial-hybrid city bus are among the projects under development at Fiat subsidiary Iveco’s Altra plant in Genoa, Italy.
2009-05-01
Article
Many hybrid-vehicle supporters feel battery power can help wean the U.S. from its reliance on foreign oil, but there’s concern that most batteries are now made in the Far East. The Argonne National Laboratory and the state of Kentucky have teamed up to address this concern.
2009-05-01
Article
Graphicast’s graphite mold casting process is a suitable solution for the manufacture of high-precision components and features decreased mold production and parts costs.
2009-05-01
Article
Chem Polymer’s 25% glass fiber-reinforced nylon 6 compound provides injection molders with an alternative to halogenated flame retardant (FR) formulations while meeting stringent requirements for flame retardance.
2009-05-01
Article
Stellar Technology offers the series MIN840 miniature load cell with internal signal conditioning.
2009-05-01
Article
LADD Industries adds the HD10-9-1939P-B022 to the Deutsch Industrial product line of connector solutions for harsh environments and heavy-duty applications.
2009-05-01
Article
Spectroline’s Maxima ML-3500 UV lamps use micro discharge light technology plus a unique filter and bulb/reflector to deliver up to 10 times the UV-A (365 nm) output of conventional high-intensity discharge inspection lamps.
2009-05-01
Article
Land Rover unveiled a pair of new engines to its product family at the recent New York Auto Show, the first being a direct-injected, 375-hp (280-kW), 375-lb·ft (508-N·m) naturally aspirated V8 and the second a 510-hp (380-kW), 461-lb·ft (625-N·m) supercharged version of the same engine.
2009-05-01
Article
Magnetek offers a vertical design of the Aist-Nema Hi-Tork 300M mill duty shoe brake for use in tight spaces.
2009-05-01
Article
Ultraform N2320 C from BASF is a polyoxymethylene (POM; polyacetal) plastic that contains carbon nanotubes.
2009-05-01
Article
Haimer USA's Zero Master digital 3-D sensor enables accurate measurements and identifies the X, Y, and Z dimensions of a workpiece.
2009-05-01
Article
Technifor’s XF530p portable deep scribing by micro-percussion machine can reach depths of 0.4 mm (0.016 in).
2009-05-01
Article
MAZeT provides IP cores for Phoenix Contact's SUPI4 Interbus protocol for implementation in FPGAs and ASICs.
2009-05-01
Article
A newly launched company for restoring softtops can leverage the testing and product development expertise of its namesake, the original manufacturer of the Volkswagen Karmann Ghia and VW Beetle convertibles.
2009-05-01
Article
The EC102 and EC103 series of smart digital triac (triode for alternating current) closed-loop control boards from LCR Electronics enable motor speed regulation down to +/-2%.
2009-05-01
Article
Chipmakers are betting that there are going to be more displays in the car as cameras and rear-seat entertainment gain market traction. Altera Corp. and National Semiconductor have teamed up to provide graphics interconnect solutions that offer high speeds over fairly long distances.
2009-05-01
Article
Topcon Positioning System’s GRS-1 (Geodetic Rover System) is a fully integrated dual-constellation, network-enabled RTK rover system with an all-in-one handheld GNSS (Global Navigation Satellite System) receiver and field controller.
2009-05-01
Article
Most automakers won’t sweat the CAFE standard for MY2011, which NHTSA published in late March. But they clearly are nervous about the standards for 2012-2015, which will reflect more clearly the Obama administration’s belief that automakers can make cleaner cars more quickly using advanced technologies.
2009-05-01
Article
Visionaire offers the Model 4050 air conditioner with combination wall and ceiling mount for both off- and on-highway applications.
2009-05-01
Article
Quadrant EPP designs a range of Nylatron 4.6 rod and sheet sizes.
2009-05-01
Article
Featuring a simple setup, integrated part detection, lighting, I/O, and job change, Cognex’s Checker 3G verifies all products or parts on a production line.
2009-05-01
Article
When the R-Spec Genesis Coupe goes on sale this fall, the Hyundai sports car won't have a premium audio system, a power sunroof, or several other features. "We had two goals with the R-Spec: weight reduction and cost reduction," said Derek Joyce, Manager of Product Development for Hyundai Motor America.
2009-05-01
Article
Gems Sensors and Controls offers a line of magnetically actuated, moisture- and corrosion-resistant proximity safety switches for various applications.
2009-05-01
Article
CFdesign V10 from Blue Ridge Numerics is designed for use with Autodesk Inventor 2010 and provides a fully integrated and certified digital prototyping solution for solving CAD-driven fluid flow and heat transfer challenges within the Inventor environment.
2009-05-01
Article
Both land-based and aerospace engine manufacturers are increasingly outsourcing turbine engine repair and refurbishing, a rapidly growing business requiring specialized equipment and experience.
2009-05-01
Article
The Innas hydraulic transformer (IHT) and the Hydrid hydraulic serial hybrid drivetrain for passenger cars and off-road equipment from Innas and NOAX half a vehicle’s fuel consumption and reduce CO2 by 50%, according to the companies.
2009-05-01
Article
The No. 996 gas-fired, 350°F jumbo walk-in oven from Grieve is used for batch processing of large composite structures.
2009-05-01
Article
Brush Wellman’s ToughMet copper-nickel-tin products exhibit high strength as well as wear and corrosion resistance.
2009-05-01
Article
The Allen-Bradley DataSite remote terminal unit controller from Rockwell Automation processes a user program, and controls and monitors the operation of other equipment in remote locations with extreme temperatures.
Viewing 8101 to 8130 of 10157