Criteria

Text:
Content:
Display:

Results

Viewing 8041 to 8070 of 10150
2009-05-08
Article
Engineers hold the key to solving climate change caused by CO2 emissions. That was one of the important messages made by Professor Richard Folkson, Chairman of the Automobile Division of the U.K.-based Institution of Mechanical Engineers, in a speech at SAE 2009 World Congress.
2009-05-08
Article
A panel of experts at SAE 2009 World Congress discussed the topic on the mind of everyone in the automotive community. The difficulty may be in predicting what those fuel prices might be. Given uncertainty, no new technology from lightweighting to hydrogen fuel can be ruled out. Can companies afford to develop them all?
2009-05-08
Article
With Europe's regulations on vehicle recycling tightening in 2015, suppliers are playing a key role. Since efficient recycling of nonmetallic parts will be necessary, JSP commissioned an independent life-cycle assessment of its ARPRO expanded polypropylene.
2009-05-08
Article
AS5311 from austriamicrosystems is a Hall-effect-sensor-based linear magnetic encoder that features submicron resolution.
2009-05-08
Article
The light-metal RB rim by Dezent supports the design of sporty compact and midsize vehicles.
2009-05-08
Article
The 5AX-201 rotary table from Lyndex-Nikken features an 8-in faceplate trunion work envelope that can be incorporated in smaller BT30 vertical machining centers such as the Fanuc Robodrill, Brother Drill and Tap, and Kitamura Mycenter.
2009-05-06
Article
Renishaw’s RESOLUTE optical encoder system achieves 27-bit resolution at 36,000 rpm.
2009-05-06
Article
Datron Dynamics’ automated, five-axis, high-speed M8 trunnion machining center is designed for small part manufacturing.
2009-05-06
Article
Jet Edge’s 50-hp, 90,000-psi X-Stream xP90-50 waterjet intensifier pump achieves faster waterjet cutting speeds and lower operating costs compared to traditional 60,000-psi waterjet pumps, resulting in increased productivity and reduced part costs.
2009-05-06
Article
Linear Technology’s LTC3824H is a 4- to 60-V input range, low-quiescent current step-down dc/dc controller.
2009-05-06
Article
Paladin Live Real-Time Energy Management Advisor from EDSA Micro helps companies assess and reduce their energy costs.
2009-05-06
Article
Totech Super Dry’s moisture sensitive device (MSD) handling process dries components at speeds competitive with traditional methods and without the oxidation problems associated with traditional baking.
2009-05-06
Article
RIGOL Technologies’ DS1000B series of four-channel high-performance 2 GSa/s digital storage oscilloscopes features 22 automatic measurements and pass/fail capabilities.
2009-05-06
Article
CADSTAR 11 from Zuken assists engineers in controlling PCB and schematic designs with such features as intelligent busses, auto connect symbols, and schematic symbol creation wizard to output multiple gates.
2009-05-06
Article
Kavlico’s sensor suite was designed to perform in harsh hydraulic applications and is capable of operating for millions of pressure cycles.
2009-05-06
Article
Uni-form epoxy performs from Multi-Seals feature low outgassing properties.
2009-05-06
Article
Following previous introductions of their versions of the jointly developed two-mode hybrid system by General Motors and Chrysler, Mercedes-Benz revealed its first use of the drivetrain in the new ML450 Hybrid SUV.
2009-05-06
Article
The New Domestics (Honda, Toyota, and Nissan) spend less money than do their Detroit Three counterparts on vendor tooling, according to the Harbour-Felax study. Vendor tooling consists of molds, dies, jigs, and fixtures used by suppliers to make parts for their OEM customers.
2009-05-05
Article
Rollovers are the deadliest type of crashes in the U.S., accounting for about 10,000 deaths annually, according to NHTSA (National Highway Traffic Safety Administration). A new final rule announced by the agency April 30 will reduce that number, the agency says.
2009-05-04
Article
SAE currently is in the process of standardizing TTP communication protocol and TTP physical layer. The main objective of the standard, AS6003, is to protect past system investments and simplify design of open, distributed, and truly modular A&D systems and architectures.
2009-05-04
Article
The infrastructure for AUTOSAR continues to grow even though its usage remains below expectations. ­The MathWorks and Vector Informatik have teamed up to provide compatible tools that help engineers develop AUTOSAR-compliant systems.
2009-05-04
Article
Graduate and undergraduate students enrolled in The Ohio State University’s college of engineering are—thanks in part to the school’s partnership with the Center for Automotive Research—exposed to a wide variety of real-world assignments.
2009-05-04
Article
The 19-in IS-ONE light alloy wheel from Cargraphic features a sporty Y-spoke design together with the center lock.
2009-05-04
Article
The trend to include USB ports in vehicles is accelerating rapidly. One of the major players in USB chips for PCs and consumer electronics, SMSC, is moving into the automotive market with a multiport hub.
2009-05-04
Article
New configurations of Sepro America’s Axess range of servo-driven beam robots provide molders up to 33% greater vertical reach, says the company.
2009-05-04
Article
The MB88395 from Fujitsu Microelectronics America is an automotive controller that transmits high-definition video over the 1394 in-vehicle multimedia network.
2009-05-04
Article
Schaefer’s C/B5800 Series includes a 12,000-W dc/dc converter, an ac/dc power supply, and battery charging products.
2009-05-04
Article
Highland Technology’s T564 mini embedded digital delay generator starts with an internal or external trigger and produces four output pulses programmable for delay and width, with nanosecond-to-second range and picosecond jitter and resolution.
2009-05-04
Article
BMW debuts innovative reverse-flow V8 with cross-bank turbo technology in M editions of its X6 and X5 crossovers.
2009-05-04
Article
Green safety is a red-hot topic now that alternative-propulsion vehicles are part of the roadway landscape.
Viewing 8041 to 8070 of 10150