Criteria

Text:
Content:
Display:

Results

Viewing 7951 to 7980 of 10229
2009-06-25
Article
Based on a modular design, SV-1000 series vertical CNC honing machines from Sunnen are engineered to scale up from a single-spindle machine to a fully automated multispindle unit for ultraprecise bore sizing and finishing.
2009-06-25
Article
Agilent Technologies offers a low-power double data rate (LPDDR) ball grid array (BGA) probe solution for oscilloscopes and logic analyzers.
2009-06-25
Article
Savi Technology says its hybrid ST-694 GlobalTag is the first asset and shipment monitoring device that combines GPS, active RFID (radio frequency identification), and satellite communications technologies.
2009-06-25
Article
Helac has expanded the T20 Series of helical, hydraulic rotary actuators, combining one-piece through shaft and internal tapered roller bearings for applications where torque generation and higher frequency cycling are required.
2009-06-25
Article
PC-DMIS Reshaper from Hexagon Metrology is a stand-alone 3-D point-cloud processing software for reverse engineering and inspection.
2009-06-25
Article
REM has established a refurbishment program that converts scrap parts into better-than-new components, according to the company.
2009-06-25
Article
AIT’s Moving Line Tug (MLT) is an automated guided vehicle that attaches to the front landing gear of an aircraft and pulls it through the assembly process
2009-06-25
Article
Korean aircraft constructor KAI Korea Aerospace Industries Ltd. has placed an order for seven Ecospeed F high-performance machining centers, including a rail-guided transport system, in a multimillion dollar deal with the machine-tool specialist Dörries Scharmann Technologie GmbH.
2009-06-24
Article
TorcUP offers the Raptor wrench with continuous and repeatable torque and an accuracy of ±5%.
2009-06-24
Article
The Micron Xtrue true planetary gearheads from Thomson are designed to move large loads quietly and easily.
2009-06-24
Article
GKN Aerospace has awarded a contract to Brotje Automation of Germany to supply an advanced "moving line" assembly system for A350XWB wing structures.
2009-06-24
Article
Helical Solutions LLC is introducing a new, two-flute, high-performance, nonserrated end mill for roughing in aluminum applications, and it has improved the design of three existing rough and finish aluminum-cutting tools.
2009-06-23
Article
Electronic devices of the future could be smaller, faster, more powerful, and consume less energy because of a discovery by researchers at the Department of Energy's Oak Ridge National Laboratory. Published in Science, the key to the finding involves a method to measure intrinsic conducting properties of ferroelectric materials, which for decades have held tremendous promise but have eluded experimental proof.
2009-06-22
Article
For high-resolution measurement of position, speed, and velocity, Baumer's MHXX Series hollow-shaft, large-bore, magnetic rotary encoders contain no bearings, so measurement is contact-free and components do not wear.
2009-06-22
Article
The portable InfraCal biodiesel blend analyzer from Wilks Enterprise permits accurate blend ratio measurements in under a minute to help with biofuel percentages.
2009-06-22
Article
Tracer Products' TP-3400 Dye-Lite all-in-one full-spectrum fluorescent dye pinpoints leaks in all oil and oil-based fluid systems.
2009-06-22
Article
The Schwingmetall L-series hydromount from ContiTech is derived from a hydraulic engine mount with two working chambers.
2009-06-22
Article
With 1000 lumen output, the Model 735 high-output LED work lamp from J. W. Speaker delivers more than twice the light of the previous generation with improved white light brightness and no bulb.
2009-06-22
Article
The BODAS RC36-20 controller from Rexroth uses 32-bit TriCore technology to improve electronic control performance and efficiency on mobile hydraulic equipment.
2009-06-22
Article
Elektrobit (EB), a leading supplier of embedded software and hardware solutions for the automotive and wireless industries, and Audi Electronics Venture (AEV), a 100% subsidiary of Audi AG, are launching a joint venture July 1 that will concentrate on the development of a software framework for in-vehicle infotainment systems.
2009-06-18
Article
Composite parts in the fuselage, wings, radomes, tail assemblies, and other areas of airplanes or helicopters pose new challenges that apply to the whole product life cycle. Due to the often complex internal structure of the materials, it is important to monitor the formation of correct bond lines between the individual layers during production.
2009-06-18
Article
Computer radiography (CR) offers benefits over X-raying as a method of nondestructive testing in the aerospace industry. CR does away with environmentally harmful or even toxic chemicals needed to develop the film and offers a better level of information.
2009-06-18
Article
The 4256 Series torque motor from Sonceboz is a brushless rotary actuator designed for medium- and heavy-duty applications.
2009-06-18
Article
Engineered without bearings, electric contacts, or diaphragms that could show fatigue or wear out, Facet/Purolator’s cube solid-state self-priming and self-regulating fuel pumps deliver quality performance and last up to five times longer than many competitive electronic fuel pumps.
2009-06-18
Article
The Series 1600 diesel engines from MTU extend its engine program in the lower power output range from 270 to 730 kW.
2009-06-18
Article
Cummins’ four-cylinder QSB3.3 and QSB4.5 engines will meet EU Stage IIIB and U.S. EPA Tier 4 Interim off-highway emissions in 2012 across a 75- to 160-hp (56- to 119-kW) power range.
2009-06-18
Article
Horton’s VMaster and Stratis Di Viscous fan drive and controller systems provide customers the flexibility of variable speed along with optimal engine cooling, reduced fuel consumption, decreased noise, and more available horsepower for auxiliary components.
2009-06-17
Article
The EZ Trac hydraulic driven axle system from Tuthill Drive Systems, designed for heavy-duty applications, is lightweight and produces an estimated 10% fuel savings vs. mechanical drive systems.
2009-06-17
Article
Elobau Sensor Technology’s 175D miniature thumbwheel is an illuminated device based on Hall-effect technology that can be incorporated in the knob of a joystick, a multifunctional handle for a shifter, or a control panel.
2009-06-17
Article
NorthStar harsh-duty shaftless encoders from Dynapar remove coupling and sealing issues that can occur with rotary position sensors; their magnetic coupling technology eliminates shaft, bearings, and seals that are prone to wear and failure.
Viewing 7951 to 7980 of 10229