Criteria

Text:
Content:
Display:

Results

Viewing 7861 to 7890 of 10097
2009-06-16
Article
Cooper Bussmann’s expertise in CAN systems includes products and technologies in power management, power protection, and wired and wireless control systems, all of which are ruggedized for demanding on- and off-highway applications.
2009-06-16
Article
The TTC 50 electronic controller family from TTControl features a new electronic architecture and delivers flexibility, modularity, and user friendliness.
2009-06-16
Article
Ductorseal sealed wire and cable assemblies from Douglas Electrical Components solve through-bulkhead conductor sealing problems in small engine fuel-delivery modules.
2009-06-16
Article
The PowerView 750 CAN-based display from FW Murphy expands the customization options available to the off-highway market.
2009-06-16
Article
Ametek’s NGI vehicular instrumentation system includes the CAN-Communicator, which is a rugged, 2-in (50-mm) gauge that can be used either by itself or as a complement to existing instrumentation by connecting it to an SAE J1939 CAN data bus.
2009-06-16
Article
J.R. Merritt Controls’ CS3 joystick controller features a nonbiasing center pivot design, corrosion-resistant components, and rugged construction.
2009-06-16
Article
The NGS1 sensor from Sensor Technik Wiedemann functions as an inclinometer or a gyroscopic angular rate sensor, or as a combination of the two in one housing.
2009-06-16
Article
The D Series cast iron gear motor from Sauer-Danfoss improves performance in demanding off-highway applications.
2009-06-16
Article
SVCL and SPCL series solenoid-operated on/off proportional cartridge valves with integral piloting or load-signaling from HydraForce offer a compact solution for directional control and load-holding applications.
2009-06-16
Article
Eaton has developed a silicone hose for high-temperature, high-vibration, and chemically challenging truck, bus, and mobile off-highway applications.
2009-06-16
Article
NHTSA (U.S. National Highway Traffic Safety Administration) is seeking comment on whether to revise its standard on bumpers to include light trucks, vans, and SUVs. The deadline for comments is Aug. 14.
2009-06-15
Article
Northwire’s DataCELL J1939 CAN bus cables are designed to meet and exceed the SAE J1939/11 specification.
2009-06-15
Article
ITT Interconnect Solutions has expanded its range of APD connectors with one-, seven-, and 51-way devices.
2009-06-15
Article
Two pressure sensors from Kavlico assist in optimizing engine performance of heavy-duty engines.
2009-06-15
Article
The Hall-effect analog output FNR switch from OTTO Controls is a compact three-position switch for use in off-highway machinery that provides operator comfort by reducing the movement required to change direction and switch gears.
2009-06-15
Article
Mico's check valve assembly for full-power brake systems is a compact manifold assembly with a check valve and inverted shuttle valve.
2009-06-15
Article
A full flange system from Parker Hannifin enables the flange to be attached to a hose after the fitting has been crimped on, improving connection assembly.
2009-06-15
Article
Hawe Hydraulics' type PSL proportional spool valve with direct CAN bus interface features simplified wiring connected and ready for use.
2009-06-15
Article
The VE10, VE30, and VE60 exchange valves from Poclain Hydraulics are suitable for exchange flows from 10 to 60 L/min (3 to 16 gal/min) in circuits at 450 bar (6530 psi).
2009-06-15
Article
Caterpillar’s C7.1 ACERT engine features a 7.01-L platform with a power rating of 175-300 hp (130-225 kW) and delivers a peak torque of 944 lb·ft (1280 N·m).
2009-06-15
Article
ArvinMeritor’s global hub reduction axle family of single and tandem rear axles provides operational flexibility for the heavy haul and construction, refuse, logging, concrete, and mining vocational markets.
2009-06-15
Article
Mercedes-Benz has revealed its S-Class hybrid-based ESF (Experimental Safety Vehicle) 2009, which brings a new dimension to airbag applications.
2009-06-15
Article
Ford's imported van/wagon, the Transit Connect, will be converted to all-electric at a U.S. plant by Smith Electric Vehicles. It will be offered with two different-capacity battery packs, one rated for 70 miles, one for 100 miles. Availability is scheduled for start of second quarter of 2010.
2009-06-15
Article
With its new-generation Polo, Volkswagen has concentrated on introducing technology that will advance the car in almost every respect and raise its overall quality level.
2009-06-15
Article
The new European Commission regulation introducing mandatory CO2 emissions limits for passenger cars was published on June 5, according to InterRegs, an online resource for global vehicle safety and emissions regulations.
2009-06-15
Article
President Stephanie Burns said Dow Corning will concentrate its research efforts on finding innovative, sustainable “solutions linked to global megatrends such as the drive for efficiency, increased focus on alternative energy and clean water, and the rapid urbanization in fast-growing emerging geographies.”
2009-06-12
Article
SKF's portfolio of customized bearings can improve powertrain efficiency by reducing friction up to 30% and in the process cut CO2 emissions.
2009-06-12
Article
The Kubota 07 Series from Kubota Engine includes the V2607-DI-Turbo, a new engine that follows the same design concept as the existing V3307-DI-Turbo.
2009-06-12
Article
John Deere Power Systems has developed technology solutions to meet the Interim Tier 4/Stage IIIB mobile off-highway emissions regulations for its lineup of industrial diesel engines.
2009-06-12
Article
Traditionally, acrylic has been only used in transparent applications, such as head and taillights. However, the recent use of opaque acrylic has expanded areas in which acrylic is used on a vehicle to include pillars, spoilers, roof and window trim, quarter and body panels, as well as emblems and logos. Integrating acrylic into these “nontraditional” parts can lead to a number of manufacturing and aesthetic advantages.
Viewing 7861 to 7890 of 10097