Criteria

Text:
Content:
Display:

Results

Viewing 7771 to 7800 of 10095
2009-07-08
Article
Diodes’ features three dual-device MOSFET/Diode combinations in thermally efficient, ultrasmall DFN packaging.
2009-07-08
Article
Yokohama Tire’s eco-focused dB Super E-spec passenger car tire is composed of 80% nonpetroleum-based materials.
2009-07-08
Article
An innovative multistep molding process leads to a lower-cost but upscale look for inner door panels and on the dashboard of the 2010 Ford Taurus. Even viewed close-up, or by running fingers over the "stitches," it appears to be real needle-and-thread work.
2009-07-06
Article
Federal-Mogul’s gasket technology is used to assist in fuel-cell development for energy-efficient vehicles.
2009-07-06
Article
TechViz and Kineo CAM offer a software solution of accessibility research for mounting and dismounting of complex systems both in immersive and assisted mode.
2009-07-06
Article
The Mahle Data Recorder 2 (MDR-2) from Mahle Powertrain is an in-vehicle PC capable of autonomous operation.
2009-07-06
Article
NEi Nastran V9.2 is an FEA solver with an integrated graphical user interface and model editor used to analyze linear and nonlinear stress, dynamics, and heat transfer characteristics of structures and mechanical components.
2009-07-06
Article
Available in three grades, Spartech's Extreme Thermoplastic Olefin (TPO) sheets offer a replacement for thermoforming large fiberglass and metal parts.
2009-07-06
Article
The piezoelectric pressure sensor type 6045A from Kistler Instrument is designed around a PiezoStar crystal element that has a sensitivity of -45 pC/bar.
2009-07-06
Article
The DTS 6DX from Diversified Technical Systems incorporates three linear accelerometers and three angular rate sensors in a compact package of 28 x 16.5 mm (1.1 x 0.65 in), with a mass of 26 g (0.92 oz).
2009-07-06
Article
Two digital pulse-width modulation motor controls from LCR Electronics, available in battery-powered and ac-line-powered versions, incorporate H-ridge circuitry with high-speed switching to produce precise speed and torque control, bidirectional operation, and overload protection.
2009-07-06
Article
Altair Engineering offers HyperWorks 10.0, an updated version of its integrated CAE modeling and visualization software suite.
2009-07-06
Article
World Wide Metric offers CAST SpA hydraulic hose and hose fittings.
2009-07-06
Article
The portable XL Vu VideoProbe from GE Sensing & Inspection Technologies is designed for basic inspection when operators need a quick view of hard-to-access areas.
2009-07-06
Article
The compact 8566 Series smart hydraulic actuator from Sonceboz is designed for harsh environments involving humidity, dust, vibrations, and extreme temperatures.
2009-07-06
Article
The heavy-duty, large horsepower HEX-FLX nylon coupling from Hayes Manufacturing features a rugged design and operates at up to 600 hp (450 kW).
2009-07-06
Article
Seals Eastern offers 7182X elastomeric seals with AFLAS sealing material, featuring low compressive stress relaxation and resistance to aqueous and nonaqueous fluids.
2009-07-06
Article
Honda’s new-generation V-Twin engines provide a high level of value, fuel efficiency, emissions performance, versatility, and quiet operation.
2009-07-06
Article
MTS Sensors’ M-Series Model MH Temposonics magnetostrictive linear-position sensors are designed for improving safety and versatility, increasing reliability, and reducing service costs for position-sensing applications in rugged environments.
2009-07-06
Article
They created green vehicles in the virtual world, and in the coming months 17 collegiate teams get physical in the second phase of a three-year, government-industry sponsored challenge.
2009-07-06
Article
Wachendorff Elektronik’s concept operator panel, which is based on the OPUS A1+ standard operator panel, contains a PXA255 32-bit processor with 400 MHz, 64 MB RAM, internal mass-storage (NAND-Flash) with 1 GB, SD-card, and a 10.4-in touch screen with VGA resolution.
2009-07-06
Article
High-performance speed reducers and increasers from Cotta Transmission change engine speed to operate an application at its peak efficiency.
2009-07-06
Article
Lord’s TFD noncontact magnetic sensors produce a continuously variable resistive steering torque, delivering high-fidelity tactile feedback and maximum control to the operator in steer-by-wire applications.
2009-07-06
Article
Donaldson’s Modular Fuel System is a bolt-on replacement to existing medium-flow filters that consists of a single-base head assembly and modular components including a water sensor, electrical heater, visual water bowl, manual priming pump, and life indicator (electronic or visual).
2009-07-06
Article
The DRUM-DHW-55 Series of Omegalux drum heaters from Omega Engineering are flexible, thin, and efficient, providing even heat to the contents of the drum.
2009-07-06
Article
The Scuderi Group’s split-cycle engine is a one-liter, naturally aspirated gasoline prototype that is expected to produce up to 80% fewer toxins than a typical internal combustion engine.
2009-07-06
Article
Sensors’ high-speed exhaust flowmeter, the Semtech EFM-HS, offers a sampling rate of up to 2500 Hz and four dual-stage differential pressure transducers.
2009-07-06
Article
The MT2A test stringpot from Celesco Transducer Products comes in 3-, 9-, 15-, and 30-in (76-, 229-, 381-, and 762-mm) stroke ranges and offers an expanded operating temperature range and a rugged aluminum sensor cover option suited for high-impact or harsh applications.
2009-07-06
Article
The 367 mpg that Nissan has mentioned for its all-electric 100-mi-range car won't be on the window sticker, but it will reflect DOE calculations for CAFE. Electric-car window stickers will have numbers in the 100-mpg range. Plug-in hybrid measurement procedures are still in development.
2009-07-06
Article
Plexus provides adhesives that offer a combination of high strength, fatigue endurance, impact resistance, and toughness on metals and other substrates, including stainless steel, aluminum, thermoplastics, and composites.
Viewing 7771 to 7800 of 10095