Criteria

Text:
Content:
Display:

Results

Viewing 7231 to 7260 of 10101
2009-12-02
Article
When parts fail, it can affect the delivery of goods and the safety of the general public as well as result in costly repairs and downtime. Understanding why a part failed is critical to preventing future failures. The most common type of failure that is studied is fracture; other types may be related to distortion, wear, or corrosion. A well-equipped lab, such as Stork Technimet, will have most of the tools to analyze these types of failures.
2009-12-02
Article
Using open standards developed by an industry association and SAE, "Shop of Tomorrow" offers independent garages the ability to upgrade to electronic systems that minimize data entry, assist diagnosis, order parts, and even print the customer bill. The garage gets a choice of service and hardware providers at each step, with the standards designed to ensure compatibility.
2009-11-30
Article
Delphi has entered the European digital tachograph market with the EFAS 3 device, produced in partnership with EFKON of Germany, a company better known for telecommunication and electronic vehicle tolling systems. Delphi has also launched a European diagnostic tool for trucks and buses, including braked trailers, designed for independent service providers.
2009-11-30
Article
Scania has developed a new coach for the European market in partnership with Chinese coach body builder Higer. The cooperation will produce further models in the future. The body was designed by Scania’s design department and then developed jointly with Higer.
2009-11-30
Article
The MR technology is tunable. It was supplied by Delphi Chassis Systems, now part of BWI Group.
2009-11-30
Article
TTE-Protocol Layer from TTTech is a software-based implementation of the TTEthernet protocol.
2009-11-25
Article
Schaeffler Group rolls out a new twist on variable cam timing and helps reduce transaxle friction using tandem ball bearings.
2009-11-25
Article
The U.K. Environmental Transport Association has issued a report stating that a major move to electric cars could speed, rather then slow, climate change.
2009-11-25
Article
Proven in transmission production, the MQL process is expected to save Ford millions in energy costs.
2009-11-25
Article
FIRE engines and Multiair valvetrains from Italy are keys to boosting Chrysler’s fleet fuel efficiency by 2014, says new Powertrain boss Paolo Ferrero.
2009-11-25
Article
The Concept 6 features an inline 1.6-L engine that’s nearly as compact as an inline four but with much greater torque.
2009-11-25
Article
Collision Detector KCD V2.05 is a high-efficiency collision detector from Kineo CAM that comes as a software library allowing an easy integration through its C++ programming API.
2009-11-25
Article
E-Up! points to the future of urban transportation for the German company, but its head of research and development remains unconvinced of the battery exchange services being discussed by some competing OEMs.
2009-11-25
Article
It may seem that today’s aerospace industry has little in common with its early days, but the reality is, there remains many similarities—chief among them is the fact that people are who make the industry fly; people are who solve the complex challenges presented by modern aerospace engineering.
2009-11-25
Article
No one at SAE International’s recent AeroTech Congress & Exhibition in Seattle was in denial about how severely the poor economic situation has impacted the aviation industry.
2009-11-25
Article
An online selection guide from Dickson helps users find data loggers and chart recorders for monitoring temperature, humidity, pressure, or electronic signal events.
2009-11-24
Article
Boeing on Nov. 20 held a groundbreaking ceremony for a second final-assembly plant for the 787 Dreamliner. Production at the plant in Charleston, SC, is expected to begin in July 2011. Boeing previously had announced that it would implement "transitional surge capability" at its current 787 final-assembly plant in Everett, near Seattle, WA, to meet demand for the aircraft.
2009-11-24
Article
Engineers working on the XCOR Lynx launch vehicle program are not only refining the vehicle's aerodynamic design, they are making progress in fabricating the crew cabin, testing cryogenic pumps for use in the propulsion system, and continuing tests of the liquid fuel rocket engines that will propel the vehicle to the edge of space.
2009-11-23
Article
Honda’s battery-electrified modes of transport on display at the 2009 Tokyo Motor Show included four-, two-, and one-wheel concept vehicles, ranging from relatively small to very small.
2009-11-23
Article
While Nissan’s star exhibit at the 2009 Tokyo Motor Show was the Leaf electric sedan (see the AEI October magazine), a big crowd-gatherer was the Land Glider concept electric car that leans into corners.
2009-11-20
Article
Brazing and investment casting, adapted for use in repairing and manufacturing aerospace engines, make use of ceramics’ extreme heat resistance, in addition to its wear and corrosion resistance, light weight, and electrical- and heat-insulation properties.
2009-11-20
Article
Alcoa is undertaking the refurbishment of a massive 50,000-ton forging press at its Cleveland Works to make large parts for Lockheed Martin's F-35 Joint Strike Fighter.
2009-11-20
Article
The Center for Automotive Research forecasts that even at $6/gal in 2011, diesels would represent just 5% and gasoline hybrids just 10% of the market, and by 2015 hybrids perhaps only would double the 2011 level.
2009-11-20
Article
Supercritical Fluid Technologies’ SFT-100XW Supercritical Fluid Extraction (SFE) system enables the extraction of fluids in a supercritical fluid media for laboratory analysis, teaching, and process development applications.
2009-11-20
Article
United Electronic Industries’ DNx-AI-255 Synchro/Resolver interface boards come in two models – one for use with the firm’s PowerDNA Cubes and another for rack mounting in a PowerDNR Rack Tangle or Half Rack chassis.
2009-11-20
Article
Eastman Chemical offers a performance additive to enable volatile organic compound (VOC)-compliant coatings in high-solids systems.
2009-11-20
Article
The ADL945PC-LTSPREADER from Advanced Digital Logic is a lightweight spreader for the ADL945PC family of single-board computers.
2009-11-20
Article
Beta Transformer Technology’s DSS-3305 is claimed to provide the smallest footprint dual-channel transformer on the market while satisfying the maximum height limit of 0.185 in.
2009-11-20
Article
FactoryTalk Historian Machine Edition (ME) software from Rockwell Automation is designed to help manufacturers reduce the risk of machine downtime and reach continuous-improvement goals.
2009-11-20
Article
A Cooperative Research Program conducted through SAE International to investigate the safety and environmental performance of a new refrigerant for mobile air-conditioning systems announced that HFO-1234yf can be used as the global replacement for R-134a.
Viewing 7231 to 7260 of 10101