Criteria

Text:
Content:
Display:

Results

Viewing 6931 to 6960 of 9678
2009-12-04
Article
At the core of FiberVision’s Nanosmart-PoE (Power over Ethernet) is the single-board camera VCSBC4012 nano by Vision Components.
2009-12-04
Article
Mag says it followed the voice of the customer for input into the design of its modular HMC 1250 Series with a new 180,000-position A-axis tilt spindle for five-axis horizontal machining on large parts.
2009-12-04
Article
HXF multiflute end mills from Helical enable higher feed rates for finishing difficult materials.
2009-12-04
Article
Sagem, part of the Safran Group, will be supplying its Sigma 40XP inertial navigation system to the French navy as part of an effort to modernize France’s SNA-class nuclear attack submarines. The Saphir was already fitted with one of the systems and its effectiveness was demonstrated during operational trials at sea.
2009-12-04
Article
Automakers would need to enhance existing side airbags and/or employ advanced laminated glazing to meet the requirements of a new, proposed Federal Motor Vehicle Safety Standard to prevent ejection of vehicle occupants through side windows in rollover and other types of crashes.
2009-12-03
Article
Ricardo and IAI team on a solution that addresses wasted fuel and both noise and air pollution.
2009-12-03
Article
The auto industry’s weight-saving campaign is set to move into a new phase at Bayer MaterialScience. Already one of the world’s leading producers of carbon nanotubes, Bayer is confident that it is ideally positioned to help the auto industry meet ever more stringent environmental and energy legislation.
2009-12-03
Article
Performance parts long have been available for heavy-duty diesel trucks, and a leading aftermarket supplier believes there could be a market for them in the European cars being sold in the U.S. A Jetta TDI diesel car is outfitted as a showcase for the technology.
2009-12-03
Article
One of Navistar International Corp.’s wholly owned affiliates has signed a joint venture agreement with U.K.-based Modec Ltd. to create the Navistar-Modec EV Alliance, LLC. The JV will produce and market Class 2c-3 all-electric commercial trucks for sale in North, Central, and South America.
2009-12-03
Article
BERU supplies sensor solutions for powertrains and exhaust systems, including temperature, motion, and smart sensors with intelligent electronics.
2009-12-03
Article
Daimler Trucks is the largest truck manufacturer in the world, having sold some 329,800 vehicles in 2008 and claiming a 15.2% slice of the global truck market. So when the company launches a new range of engines, it’s big news in every sense.
2009-12-03
Article
Carraro DriveTech displayed a concept transaxle designed for agricultural and other off-highway applications at the recent Agritechnica. The transaxle, named VaryT, introduces a Torotrak toroidal transmission in place of a hydrostatic/shunted hydrostatic drive in a transaxle casing.
2009-12-03
Article
According to InterRegs, an online resource for global vehicle safety and emissions regulations, the European Parliament on Nov. 25 approved a draft regulation on the labeling of tires with respect to fuel efficiency and other essential parameters.
2009-12-03
Article
Cummins’ new ISX11.9 11.9-L engine would be a comfortable fit for European automotive use. Truck engine capacity in Europe averages around 12 to 13 L for long-haul use, around 2 to 3 L less than the average in North America. For North America, Cummins is targeting dump trucks, mixers, fire trucks, and refuse vehicles for the engine.
2009-12-02
Article
Using open standards developed by an industry association and SAE, "Shop of Tomorrow" offers independent garages the ability to upgrade to electronic systems that minimize data entry, assist diagnosis, order parts, and even print the customer bill. The garage gets a choice of service and hardware providers at each step, with the standards designed to ensure compatibility.
2009-11-30
Article
Delphi has entered the European digital tachograph market with the EFAS 3 device, produced in partnership with EFKON of Germany, a company better known for telecommunication and electronic vehicle tolling systems. Delphi has also launched a European diagnostic tool for trucks and buses, including braked trailers, designed for independent service providers.
2009-11-30
Article
Scania has developed a new coach for the European market in partnership with Chinese coach body builder Higer. The cooperation will produce further models in the future. The body was designed by Scania’s design department and then developed jointly with Higer.
2009-11-30
Article
The MR technology is tunable. It was supplied by Delphi Chassis Systems, now part of BWI Group.
2009-11-30
Article
TTE-Protocol Layer from TTTech is a software-based implementation of the TTEthernet protocol.
2009-11-25
Article
Schaeffler Group rolls out a new twist on variable cam timing and helps reduce transaxle friction using tandem ball bearings.
2009-11-25
Article
The U.K. Environmental Transport Association has issued a report stating that a major move to electric cars could speed, rather then slow, climate change.
2009-11-25
Article
Proven in transmission production, the MQL process is expected to save Ford millions in energy costs.
2009-11-25
Article
FIRE engines and Multiair valvetrains from Italy are keys to boosting Chrysler’s fleet fuel efficiency by 2014, says new Powertrain boss Paolo Ferrero.
2009-11-25
Article
The Concept 6 features an inline 1.6-L engine that’s nearly as compact as an inline four but with much greater torque.
2009-11-25
Article
Collision Detector KCD V2.05 is a high-efficiency collision detector from Kineo CAM that comes as a software library allowing an easy integration through its C++ programming API.
2009-11-25
Article
E-Up! points to the future of urban transportation for the German company, but its head of research and development remains unconvinced of the battery exchange services being discussed by some competing OEMs.
2009-11-25
Article
It may seem that today’s aerospace industry has little in common with its early days, but the reality is, there remains many similarities—chief among them is the fact that people are who make the industry fly; people are who solve the complex challenges presented by modern aerospace engineering.
2009-11-25
Article
No one at SAE International’s recent AeroTech Congress & Exhibition in Seattle was in denial about how severely the poor economic situation has impacted the aviation industry.
2009-11-24
Article
Boeing on Nov. 20 held a groundbreaking ceremony for a second final-assembly plant for the 787 Dreamliner. Production at the plant in Charleston, SC, is expected to begin in July 2011. Boeing previously had announced that it would implement "transitional surge capability" at its current 787 final-assembly plant in Everett, near Seattle, WA, to meet demand for the aircraft.
2009-11-24
Article
Engineers working on the XCOR Lynx launch vehicle program are not only refining the vehicle's aerodynamic design, they are making progress in fabricating the crew cabin, testing cryogenic pumps for use in the propulsion system, and continuing tests of the liquid fuel rocket engines that will propel the vehicle to the edge of space.