Criteria

Text:
Content:
Display:

Results

Viewing 6871 to 6900 of 10229
2010-03-08
Article
Mubea produces flexible tailor-rolled blanks and lightweight design components with continuously variable wall thickness.
2010-03-08
Article
IBM Rational software platform for automotive systems provides the ability to define, model, specify, simulate, develop, test, and integrate in-vehicle electronic and electric systems and embedded software.
2010-03-08
Article
Concepts NREC supplies design, engineering, and manufacturing services for all industries that use turbomachinery equipment.
2010-03-08
Article
Transportation Research Center is an independent automotive proving ground providing R&D and compliance and certification testing services for all stages of the vehicle life cycle, from production to service and aftermarket, to the commercial automotive industry including manufacturers, government, and industry organizations.
2010-03-08
Article
NI VeriStand from National Instruments is a software environment for configuring real-time testing applications, including hardware-in-the-loop simulation, environmental and durability testing, dynamometer testing, and wind-tunnel testing.
2010-03-08
Article
The TM4 Motive electric powertrain features a permanent-magnet machine with 1.3 kW/kg (0.59 kW/lb) power density. It is designed to reduce vehicle development times and cost.
2010-03-08
Article
Featuring automatic mesh generation, CONVERGE automotive CFD software from Convergent Science simulates the fluid flow, spray, and combustion found within an internal-combustion engine.
2010-03-08
Article
The University of Houston Texas Diesel Testing & Research Center's services include pre-verification testing, technology screening, optimization of technologies, fundamental and applied research, concept development, and technology demonstrations.
2010-03-08
Article
At the 2010 SAE World Congress, Scuderi will show the latest iteration of its split-cycle engine prototype which is currently under test at Southwest Research Institute.
2010-03-08
Article
PREEvision from Aquintos is a CASE tool for the model-based development and evaluation of electrical/electronic architectures in motor vehicles or any kind of technical system equipped with distributed networked embedded systems.
2010-03-08
Article
Albonair’s selective catalytic reduction (SCR) system achieves optimum NOx emissions reduction by using a urea dosing system to adjust the reducing agent diesel exhaust fluid (DEF) droplet size depending on exhaust conditions.
2010-03-08
Article
AVL’s powertrain development process is aimed at significantly improving operating efficiency/economy, maintaining expected performance, and integrating advanced technology into the production process.
2010-03-08
Article
The Reactiv from CT Drives is an active alternator pulley that reduces NVH by decoupling the normal engine crankshaft vibrations and by firing strokes from the inertia of the alternator rotor.
2010-03-08
Article
The stochastic reactor modeling suite from cmcl innovations is an in-cylinder combustion and emissions simulator for internal-combustion engine applications.
2010-03-08
Article
The Px3 from DG Technologies is a compact J2534 tool for reprogramming and vehicle diagnostics.
2010-03-08
Article
Sealed, brushless 12- and 24-V dc SBL300 motors from Spal are suitable for axial fans and centrifugal blowers.
2010-03-08
Article
Formability results from Onward Technologies have successfully predicted dent resistance to optimize weight of exterior panels and offer an improved prediction of the physical part’s behavior during testing.
2010-03-08
Article
Onward Technologies offers body-side framing station optimization through CAE simulation to improve body in white (BIW) tolerance.
2010-03-05
Article
NSK’s miniature, large-lead series of ball screws is designed with small shaft diameter (6 and 8 mm), to reduce the load on motors, and the largest lead of its class (8, 10, 12, and 15 mm).
2010-03-05
Article
The sigPOD 1302 two-channel process monitor from Sciemetric Instruments comes loaded with templates for common test applications such as press; torque; and noise, vibration, and harshness.
2010-03-05
Article
The Spectroline AccuMAX XRP-3000 from Spectronics uses a dual-wavelength sensor detector to measure both ultraviolet and visible light.
2010-03-05
Article
The Model 8447 six-channel A/B switch from Electro Standards Laboratories has two channels with RJ45 Cat5e connectors and four channels with MIL-STD-1553B concentric twinaxial connectors.
2010-03-05
Article
Semelab’s ceramic diode leadless chip carrier packages provide drop-in replacement for metal electrode leadless face-type devices.
2010-03-04
Article
CFM International has opened a new CFM56 Training Center in Hyderabad, India. This facility, the fourth such engine maintenance training center for CFM56 customers worldwide, has the capacity to train 500 engineers annually and mirrors those in China, France, and the U.S.
2010-03-04
Article
A Texas Congressmen said he plans to introduce legislation mandating the fitment of black boxes, also called event data recorders, to new cars and trucks. General Motors Co. has endorsed the proposal of U.S.
2010-03-04
Article
The Airports Authority of India awarded Raytheon Co. a contract to automate air traffic control services at the Chennai International Airport. Raytheon will install AutoTrac III, its next-generation air traffic management system, to help reduce delays in aircraft arrival and departure.
2010-03-04
Article
Advanced Integration Technology (AIT), an industrial automation and tooling company delivering fully integrated plant floor systems to the aerospace industry, has expanded its manufacturing capabilities with the opening of a new subsidiary, Advanced Integrated Tooling Solutions (AITS) in Chesterfield Township, MI.
2010-03-04
Article
Emhart Teknologies, a Black & Decker Co. specializing in fastening and assembly technologies, has acquired Fastener Innovation Technology Inc. (FIT), a designer and manufacturer of critical, highly specialized aerospace fasteners based in Gardena, CA.
2010-03-04
Article
Bell Helicopter has acquired Aviation Service, a provider of modifications and upgrades, avionics, and special mission packages, based in Prague, Czech Republic. The acquisition allows Bell to more rapidly provide support and service to its European customers.
2010-03-04
Article
Alcoa has been appointed by the U.S. Army Tank Automotive, Research, Development and Engineering Center (TARDEC) to collaborate on the Army’s Fuel-Efficient Ground Vehicle Demonstrator (FED) project. In partnership with Ricardo Inc., Alcoa Defense will produce a tactical wheeled vehicle structure with the aim of significantly improving fuel efficiency while maintaining survivability, performance, and payload capability.
Viewing 6871 to 6900 of 10229