Criteria

Text:
Content:
Display:

Results

Viewing 6751 to 6780 of 10227
2010-03-22
Article
The shift to 32-bit microcontrollers has been dramatic, but there is still a solid market for 8-bit devices. Compact, inexpensive chips are being used to drive light-emitting diodes and motors remotely, using the Local Interconnect Network protocol to provide low-cost links to centralized 32-bit electronic control units.
2010-03-22
Article
Ford's exclusive rights to the specialized Microsoft automotive consumer electronics platform that powers Sync have expired. Kia is the first to capitalize, introducing its UVO (for "Your Voice") system, but Ford is upgrading its offering including the addition of Internet-based upgrades.
2010-03-22
Article
While technology provides very significant advances in reducing fuel consumption and with it the associated benefits of lower exhaust emissions, driver training can also help with savings.
2010-03-22
Article
After 32 years in Ford engineering, Keith Takasawa came out of retirement to join THINK where he's Director of North American Product Development. He was lured by technical challenges and the chance to work at a small OEM.
2010-03-19
Article
The Niton XL2 series XRF analyzer from Thermo Fisher Scientific is an instrument for metal alloy analysis that helps users instantly regain lost material traceability.
2010-03-19
Article
Linear Technology’s LTC3616 is a high-efficiency, 4-MHz synchronous buck regulator that incorporates a constant-frequency, current-mode architecture.
2010-03-19
Article
Crystek’s CVCO55CC-2580-2650 voltage-controlled oscillator operates from 2580 to 2650 MHz with a control voltage range of 0.5-4.5 V.
2010-03-19
Article
Brady Worldwide’s B-345 PermaSleeve wire markers are a heat-shrink sleeve made from an irradiated PVDF that excels in high-temperature and low-vacuum outgassing applications.
2010-03-19
Article
SAE International continually responds to a rapidly changing marketplace. We're reinventing, re-engineering, and refocusing our programs, products, and services to ensure that we deliver maximum value to the mobility engineering community.
2010-03-19
Article
Federal-Mogul’s MicroTorq low-friction crankshaft seals can directly replace existing seals to provide improvement in fuel economy and CO2 emissions.
2010-03-19
Article
Throughout the SBIR development program, TDI used various engineering and manufacturing services from CN, including periodic design audits of the engine’s turbomachinery components.
2010-03-19
Article
IBM is addressing two aspects of the auto industry’s design challenges at its 2010 SAE World Congress booth. One includes software that helps engineers better understand the product life cycle of vehicles. The other offers AUTOSAR compatibility and auto-code generation.
2010-03-19
Article
By gaining an early understanding of producibility challenges, Kaman Helicopters hopes to ensure a smooth hand-off of composite manufacturing data to the shop floor.
2010-03-19
Article
At its SAE 2010 World Congress booth, the company will be showcasing a number of hot high-tech products including its new internally developed seven-speed hybrid transmission.
2010-03-19
Article
Smaller, more reliable components made from high-temperature materials with excellent strength and flow characteristics have risen in demand. This demand can be met by producing thinner-wall parts made from high-performance thermoplastics. Industry standards for materials today need to perform at 150°C (302°F) or higher. A new high-performance line from Victrex Polymer Solutions has a melting temperature of 389°C (732°F).
2010-03-19
Article
Boeing received a $39.6 million contract from the U.S. Department of Defense to provide 85 Joint Helmet Mounted Cueing Systems (JHMCS). Boeing will deliver JHMCS aircraft hardware and pilot equipment for U.S.
2010-03-19
Article
gPROMS Fuel Cell from Process Systems Enterprise (PSE) helps reduce time to market and optimize fuel stack and system design and operation through the application of high-fidelity predictive modeling.
2010-03-19
Article
Applied Computer Technologies combined computer engineering, quality processes, and system engineering, and later added industrial safety into the integrated DrivingSystem.
2010-03-19
Article
Futronic’s portfolio includes a variety of products that fall under the categories of sensors, actuators, electronics, and hybrids.
2010-03-19
Article
Nagares’ onboard power line electromagnetic compatibility (EMC) filter for electric and plug-in hybrid automotive battery charging systems integrates voltage and power line measurement capability and relays relevant key data to the main charging stage controller.
2010-03-19
Article
The Bowles Fluidics washer pump was designed to address washer system performance issues.
2010-03-19
Article
Controllers and relays from LS Industrial Systems (LSiS) can be used for development of hybrid-electric, electric, and plug-in hybrid-electric vehicles, improving fuel efficiency and environmental issues.
2010-03-18
Article
Mercedes-Benz has come up with an elegant aerodynamic solution for its new E-Class Cabriolet, which sets a new standard for comfortable four-seat, open-air motoring.
2010-03-18
Article
General Dynamics Advanced Information Systems has been awarded a $30.6 million contract for the production of 118 Type-3 advanced mission computers (AMC) for the F/A-18 Super Hornet. The AMC, a ruggedized, high-performance/high-reliability mission and display-processing system, provides situational awareness and combat systems control to the flight crew.
2010-03-17
Article
General Dynamics Information Technology was awarded a 10-year, $228 million contract to support and modernize the U.S. Department of Transportation’s FAA Administrative Voice Enterprise Services (FAVES) program.
2010-03-17
Article
Raytheon Co. and Motion Reality Inc. entered into an exclusive value-added reseller agreement to offer virtual 3-D mission and training applications to military, law enforcement, and security forces. The agreement pairs Raytheon's defense and government systems expertise with MRI's motion-capture technology, VIRTSIM.
2010-03-17
Article
Zero Gravity Corp. (Zero-G) has established the Zero-G Weightless Lab, a specially designed two-day program providing the only commercial access to Martian, Lunar, zero, and hyper gravity environments for scientific research.
2010-03-17
Article
The Kingdom of Bahrain selected the Rockwell Collins Transportable Blackhawk Operations Simulator (T-BOS) to train its UH-60M Blackhawk helicopter pilots. The T-BOS will be delivered to the government of Bahrain under a Foreign Military Sale contract administered by the U.S.
2010-03-17
Article
Caterpillar Inc. has undertaken a study that could lead to a new hydraulic-excavator facility being built in the U.S. The company notes that such a move could triple the current capacity of hydraulic excavators that it now produces in the U.S., as well as allow it to further leverage excavator production in Akashi, Japan, to serve increasing demand in China and across Asia.
2010-03-17
Article
CPI arrives in Detroit with news of a manufacturing expansion.
Viewing 6751 to 6780 of 10227