Criteria

Text:
Content:
Display:

Results

Viewing 6661 to 6690 of 10107
2010-03-17
Article
EADS signed a cooperation agreement with Norsk Titanium Components (NTiC) covering the development of near-net-shape, plasma-based layer manufacturing technologies for aerospace, defense, and space applications.
2010-03-17
Article
The U.S. Naval Air Systems Command (NAVAIR) awarded Rolls-Royce an 11-month, $75 million MissionCare contract, including four option years. Logistics support will be provided for the Rolls-Royce AE 1107C-Liberty engines that power the U.S.
2010-03-17
Article
Prime contractor EADS North America selected Helicopter Support Inc. (HSI), a Sikorsky Aerospace Services company, to perform a contractor logistics support (CLS) program for U.S. Navy light utility helicopters (LUH) at Patuxent River Naval Air Station.
2010-03-16
Article
Hwashin uses hot press forming technology in the manufacture of tubular beams.
2010-03-16
Article
Stress homogenization is achieved throughout Mubea's fiber-composite coil springs that are made via a new coiling program and a high-performance production process.
2010-03-16
Article
Vought Defense Systems Corp. signed a contract to acquire 100% of the issued and outstanding stock of Cyber Aerospace LLC, a designer and manufacturer of unmanned aerial systems that provides services to law enforcement, military, and commercial operation globally.
2010-03-16
Article
Elbit Systems Ltd. has been awarded a contract from the Department of Defence of the Commonwealth of Australia for the supply, integration, installation, and support of a Battle Group and Below Command, Control and Communications (BGC3) system for the Australian Army’s Land 75/125 program.
2010-03-16
Article
GeoEye Inc., a provider of satellite and aerial-based geospatial information and services, selected Lockheed Martin Space Systems Co. to build GeoEye-2, the next-generation, high-resolution Earth-imaging satellite system.
2010-03-16
Article
Honeywell International Inc., Defense and Space Electronic Systems located in Albuquerque, NM, awarded Sypris Electronics an estimated $6 million follow-on order to produce electronic assemblies for the F-16 Digital Flight Control Computer (DFLCC).
2010-03-15
Article
Ticona's Fortron 6162XF is a versatile mineral/glass-reinforced polyphenylene sulfide (PPS) with improved fuel resistance for applications used with aggressive fuels.
2010-03-15
Article
WEG Electric's TENV vector duty motor line is designed for use in applications where energy efficiency and 1000:1 constant torque ratio is required.
2010-03-15
Article
An all-electric honing system for hydraulic actuators from Sunnen is suitable for cylinder resurfacing and repair on construction, mining, farming, and forestry equipment.
2010-03-15
Article
A rubber brake diaphragm from Ningbo Qiaoshi Rubber & Plastics is a key component in the air chamber of truck braking systems.
2010-03-15
Article
Hyosung’s polyester-tufted carpets compare similarly in performance to nylon-tufted carpets at a lower cost and with greater ease of removing contamination.
2010-03-15
Article
Daesung Electric’s Intelligent Human Vehicle Interface (IHVI) controller features a steering wheel haptic, Lumino console haptic, and haptic touch screen.
2010-03-15
Article
Inalfa Roof System's second-generation, bottom-load, integral multipanel roof systems can be inner or outer sliding systems and offer the same amount of exterior light into the vehicle as all-glass panel systems.
2010-03-15
Article
Inalfa Roof Systems offers a modular roof system (MORSE) designed to improve both small and large systems, including sunroofs and panoramic roofs.
2010-03-15
Article
Casmoly SH06-VX21 grease from Changam provides a low coefficient of friction of generated axial force in constant velocity joint applications.
2010-03-15
Article
Wuhan Youfin’s parking brake shoe features an increased area toward the shoe tip to support a wider lining for lower lining pressure in that region, as well as reduced crease lines in the platform surface for increased lining support and adhesive bonding.
2010-03-15
Article
The clinch joint, developed by Band-It and the Edison Welding Institute, is a mechanical method that joins dissimilar metal tubing using band clamps, and it can replace welding in some areas of the automobile.
2010-03-15
Article
The TECHSPEC lenses from Edmund Optics provide good transmission in the 345 to 700 nm range and minimize the spot size for polychromatic illumination in the 345 to 550 nm region.
2010-03-15
Article
Spectrum Advanced Specialty Products manufactures all components for its custom filtered and unfiltered connectors, including planar and tubular capacitors, shells, shields, seals, and grommets, allowing a standard lead time of 8-10 weeks and tight quality control.
2010-03-15
Article
Energy harvesting is used by ABB and Micropelt to replace the battery of a wireless sensor with a green, sustainable, maintenance-free power supply.
2010-03-15
Article
The PosiBand contact system from Positronic is qualified to SAE AS39029 and is suited for rugged environments.
2010-03-15
Article
NuinTEK’s dc Link Capacitor can be adjusted for hybrid-electric vehicles, reducing fuel consumption and decreasing emissions.
2010-03-15
Article
The Torino Chamber of Commerce promotes automotive industry development in Italy and worldwide, highlighting eco-sustainable urban mobility vehicle development, powertrain technologies, and Infomobility.
2010-03-15
Article
SK Lubricants' line of Yubase Plus oils offers improved quality over conventional oils. They are the base stock in various lubricant finishing products.
2010-03-15
Article
Shinhan Precision’s stamped fine blanking press technology is used to create a clutch piston for Magna Powertrain that replaces its current powder metal component.
2010-03-15
Article
Gowanda Electronics’ SMP1210S surface mount inductors combine high current, shielding, and small size with inductance values of 1.0 to 100 µH and current ratings of 205-1384 mA dc.
2010-03-15
Article
Construction materials, automotive parts, specialty films, and decorative sheets from Hanwha are made from the company's various composite materials.
Viewing 6661 to 6690 of 10107