Search Results

Article

Cybersecurity issues pondered at Connected Car Expo

2014-12-03

Although in-vehicle vulnerabilities have been identified, others exist in cloud-based systems. Public facilities, from traffic-light-controlling central computers to non-automotive infrastructure, may have little or no protection, speakers asserted.

Article

2016 Explorer gains more powerful four-cylinder, Platinum opulence

2014-12-03

Ford upgraded the Explorer's four-cylinder EcoBoost engine to support all-wheel drive and 3000-lb towing, while a new Platinum trim level brings many first-time amenities for Ford.

Article

Audi shows design, fuel-cell directions

2014-12-03

At the 2014 LA Auto Show, the Prologue concept car and A7 Sportback h-tron illustrate the company's plans for the design of upcoming models and the fuel cell that could power them.

Article

No 'shaky start' for Opel/Vauxhall’s new Corsa triple

2014-12-03

Thorsten Kniesa likes a quiet life, and as a senior member of the team that created Opel Group’s (Opel and Vauxhall) three-cylinder Ecotec gasoline engine, he has helped ensure that buyers of the just launched Corsa hatchback can also have one.

Article

New OGeco hybrid transmission is a space-saver

2014-12-02

Oerlikon Graziano is demonstrating a new hybrid transmission that integrates a 120-kW electric motor within the same space as a conventional transmission.

Article

Toyota seeks industry joint effort to solve Takata airbag issue

2014-12-02

Article

Ford aims for new 'halo' products and more female engineers, says COO Barb Samardzich

2014-12-02

Ford has a lot riding on the new Mustang. It isn’t just another Ford model, it is a statement of capability and international intent, and no-one appreciates that more than Ford of Europe (FoE) Chief Operating Officer.

Article

Chinese automakers focus on 'Internet mind-set'

2014-12-02

China’s automakers are gearing up to take advantage of smartphones and Internet services as they attempt to match the connectivity capabilities of their international competitors. Expanding their development programs and partnering with outsiders are key elements in the efforts.

Article

3-D tools help development teams collaborate

2014-12-01

Design and manufacturing challenges are becoming more complex and multi-dimensional, prompting design teams to expand their efforts to collaborate. This change is being aided by a shift to 3-D models, but that transition has issues that highlight the complexity of linking various groups.

Article

Study shows multiple benefits of CO2 cooling in composites drilling

2014-12-01

Dry drilling of composite-Ti stack-ups via CO2 avoids the problems associated with liquid coolants used in fuselage hole drilling, while delivering benefits in productivity, tool life, and hole quality.

Article

'Reman' engine market steady, but complexity challenges production efficiency

2014-11-26

High-tech design causes time to remanufacture engines to nearly triple and adds to cost, while used engines remain a competitive factor. However, Purdue University data shows remanufacturing is far more energy efficient than installing a new powerplant.

Article

A123 Systems is hot on 12-V Li-ion for microhybrids

2014-11-26

Lead-acid batteries have clear advantages in cost and low-temperature performance, but Li-ion has its own set of pluses.

Article

Federal-Mogul develops new bearing materials for tougher heavy-duty operating conditions

2014-11-26

The use of lead in engine bearings for light-duty vehicles was banned in the European Union from July 1, 2011, bringing widespread changes in coatings. Although heavy-duty engines have not yet been subject to similar legislation, Federal-Mogul believes that it is only a matter of time before they are.

Article

Allison Transmission expands electrification to accessory systems

2014-11-25

Allison Transmission is offering a new option to fully electrify components used with its H 40/50 EP hybrid propulsion system for transit buses and coaches. Co-developed with Vanner Inc., Increased Accessory Power II provides power from the hybrid system to accessories such as electric air conditioning, electric air compressors, and power steering systems.

Article

Selective laser sintering system

2014-11-25

3D Systems has developed its fastest fab-grade selective laser sintering system yet, the ProX 500 Plus.

Article

Micro machining center

2014-11-25

The YASDA YMC 430 Ver. II micro machining center from Methods Machine Tools, Inc. is suitable for the ultra-precise manufacturing and high surface finishes required on small, complex features in components and dies or molds.

Article

SAE Eye on Engineering Quick Take: LA Auto Show Report

2014-11-25

Article

Quadrant photodiode

2014-11-25

The SXUVPS4 multi-element photo detector from Opto Diode has a 5 mm² active area in a quadrant configuration.

Article

Simulation software

2014-11-25

AVX has released a new version of its SpiCalci simulation software, an engineering tool that calculates performance characteristics and parameters for its switch mode power supply capacitors.

Article

Laser measurement

2014-11-25

Ophir Photonics’ 1000WP-BB-34 high-power water cooled thermal sensor is designed with the requirement that all materials coming in contact with the cooling water are either copper or nonmetallic.