Criteria

Text:
Content:
Display:

Results

Viewing 6571 to 6600 of 10185
2010-04-20
Article
The U.S. government's top vehicle safety advocate is concerned about distracted drivers, electrified vehicles being too quiet, and the benefits of vehicle-to-vehicle communications.
2010-04-20
Article
Ceradyne Inc., in conjunction with Turner Strategic Technologies LLC, has been awarded a contract for the supply and installation of protective armor for the command station of nine new 35-m (115-ft) patrol vessels being manufactured for the Iraqi Navy by Swiftships.
2010-04-19
Article
JLG Industries Inc., an Oshkosh Corp. company, has received an initial order to build 26 Engine Installation and Removal Vehicles (EIRVs) for the U.S. Navy. The contract is valued at approximately $4 million.
2010-04-19
Article
Dana Holding Corp. and Bosch Rexroth AG are forming a 50:50 joint-venture (JV) company—expected to operate in Arco, Italy—that will engineer, manufacture, and market hydromechanical variable powersplit transmission systems (HVT) for global off-highway markets.
2010-04-19
Article
The complexity of modern vehicles and the high cost of research are putting an increased focus on collaboration, particularly given the cash shortage for most transportation companies, panelists said at the SAE 2010 World Congress in Detroit.
2010-04-19
Article
Columbia Research Laboratories’ DIS-7001 and DIS-7012 inclinometer systems include a temperature-compensated force balance inclinometer and a power module with digital display.
2010-04-19
Article
Data acquisition and control systems from Microstar Laboratories can run in 64-bit Windows systems, including Windows 7, with the version 5.0 release of DAPtools software.
2010-04-16
Article
An Environmental Claims Validated Mark (ECV) was presented to Positronic Industries by UL Environment for its VPB series size 16 power contacts; the ECV lists the average contact resistance for the devices at less than one milliohm each.
2010-04-16
Article
AxleTech offers an axle for empty heavy-duty material handling trucks that incorporates wheel-end technology to reduce tire wear by as much as 60%.
2010-04-16
Article
Exhaust back-pressure sensors from Kavlico improve engine performance and efficiency by protecting the engine from over-pressure damage in systems with or without a diesel particulate filter.
2010-04-16
Article
Heyco Products’ Snap-In Ratcheting Strain Relief can be removed via insertion of standard snap ring pliers with 0.040-in tips into the holes located on the outside of the part.
2010-04-16
Article
WEG Electric's efficient W magnet drive system is incorporated inside the motor and controlled by the CFW11 variable frequency drive to extend life.
2010-04-16
Article
An annual college student design competition aims to erase the stodgy views about steel wheels.
2010-04-16
Article
VA One V2009.0 from ESI Group is a complete solution for simulating noise and vibration across the full frequency range and combines finite elements, boundary elements, and statistical energy analysis in a single model.
2010-04-16
Article
Bombardier recently began testing of the composite demonstrator wing at its Belfast, Northern Ireland, facility.
2010-04-16
Article
A total of 16 engine builders individually assemble 6.75-L V8 engines, each taking 26 man-hours to do so.
2010-04-16
Article
Manufacturing plans for the new mid-engined McLaren Automotive MP4-12C are moving ahead, with production slated to start in 2011 at the new McLaren Production Center near London.
2010-04-16
Article
Spectrum’s Switch Mode Power Supply capacitors have achieved MIL-PRF-49470 approval and are said to perform better than tantalum or aluminum electrolytic capacitors, featuring low equivalent series resistance and equivalent series inductance.
2010-04-16
Article
MTA offers the PDU (power distribution unit) box to meet the higher demands of tractor and earth-moving machine applications.
2010-04-16
Article
ITT Interconnect Solutions eliminates the need to use board-to-board connectors and provides a direct interface into the box with the APD direct printed circuit board connector.
2010-04-16
Article
The RMW series of 300-W switch-mode dc power supplies from Kepco consists of six single-output models and one triple-output model.
2010-04-16
Article
The Type 8344 DeltaShear accelerometer from Bruel & Kjaer measures low levels of vibration effects in structures and machines.
2010-04-16
Article
Lee Spring's LeeP plastic composite springs are molded from SABIC Innovative Plastics’ durable Ultem brand resin.
2010-04-16
Article
Spal USA offers a line of blowers featuring sealed motors to deliver improved interior air circulation in on- and off-highway applications.
2010-04-16
Article
The Quick Connect Plug (QCP) three-in-one electrical and air hose assembly from Phillips Industries was designed to give vehicle operators an option that reduces the time required for field repairs of electrical cables.
2010-04-16
Article
PlastiCell is using Victrex APTIV film to produce lightweight thermoplastic honeycomb structures.
2010-04-16
Article
Mercedes-Benz has introduced a number of modifications to the Econic low-entry cab truck range for the 2010 model year. These include diesel models certified to European Enhanced Environmentally Friendly Vehicle (EEV) standards, new occupant safety equipment, and chassis and axle enhancements.
2010-04-16
Article
Drivetrain control technology originally developed for high-performance rally cars competing in the World Rally Championship (WRC) has been adapted for heavy-duty, off-highway, all-wheel-drive systems, with the objective of improving safety and driveability while reducing maintenance costs.
2010-04-14
Article
Now commercially available is a resin especially useful for sheet-molding compound and bulk-molding compound for vehicle exterior panels.
2010-04-14
Article
The drive to find lighter-weight engines that offer more power continues to spark start-up companies. Two of them, Vengeance Power Inc. and WaveTech Engines, Inc. displayed their first physical prototypes at the 2010 SAE World Congress.
Viewing 6571 to 6600 of 10185