Criteria

Text:
Content:
Display:

Results

Viewing 6481 to 6510 of 9678
2010-03-10
Article
Premium Aerotec GmbH recently began construction of a new plant in Ghimbav/Brasov County, Romania, for processing aircraft components. Operations are expected to begin this year and be completed by the end of 2011.
2010-03-10
Article
Northrop Grumman Information Systems awarded Sypris Electronics LLC follow-on orders to provide electronic assemblies for the communications, navigation, and identification (CNI) avionics system on Lockheed Martin's F-35 Lightning II program.
2010-03-10
Article
Early in Honda’s life as a car maker, the company produced city cars powered by small, efficient motorcycle-derived drivetrains. At the 2010 Geneva Motor Show in March, Honda recalled the 1967 N360 city car in one of its two battery electric concepts; city commuters are the target customer for the Honda 3R-C three-wheeled electric vehicle concept.
2010-03-10
Article
Quebec-based TM4 to focus on production runs of up to 10,000 units for its new permanent-magnet machines.
2010-03-10
Article
The new Twin-Air engine features Fiat's electro-hydraulic Multiair valve gear. It is expected to deliver super-low CO2 emissions in a variety of A- and B-segment vehicles beginning MY2011.
2010-03-09
Article
Kubota says its M Series tractor models feature more power, less noise, and reduced emissions.
2010-03-09
Article
The company's new SCR system adjusts the reductant-droplet size according to exhaust conditions, providing the finest possible spray.
2010-03-09
Article
DSM Composite Resins offers Palapreg ECO P55-01, a bio-renewable resin for sheet and bulk molding compound applications in the automotive and other industries.
2010-03-09
Article
DSM Engineering Plastics supplies thermoplastics offering sustainable solutions for the automotive and electrical/electronic industries.
2010-03-09
Article
Pyongsan's coaxial tube bending and assembly uses a double-layered tube to carry both suction and liquid lines within the internal heat exchange system.
2010-03-09
Article
REM Surface Engineering’s Rapid ISF (Isotropic Superfinish) process for rear-axle hypoid gear sets provides the benefits of greater efficiency, as well as reduced friction, wear, and operating temperatures, via a high-speed drag-finishing production process.
2010-03-09
Article
Cardone provides remanufactured automotive parts, from vintage to current-model applications, for 49 different product lines, using its expertise in mechanical, hydraulic, and electronic technology.
2010-03-09
Article
FCC's Advanced Segment (FAS) technology is suitable for automatic transmissions, CVTs, and wet-clutch DCTs.
2010-03-08
Article
Comfort Motion Technologies offers the CMT software system, installed in the memory module of power-seat applications to improve occupant seating comfort and alertness by automatically making subtle changes in the seat position.
2010-03-08
Article
Mubea produces flexible tailor-rolled blanks and lightweight design components with continuously variable wall thickness.
2010-03-08
Article
IBM Rational software platform for automotive systems provides the ability to define, model, specify, simulate, develop, test, and integrate in-vehicle electronic and electric systems and embedded software.
2010-03-08
Article
Concepts NREC supplies design, engineering, and manufacturing services for all industries that use turbomachinery equipment.
2010-03-08
Article
Transportation Research Center is an independent automotive proving ground providing R&D and compliance and certification testing services for all stages of the vehicle life cycle, from production to service and aftermarket, to the commercial automotive industry including manufacturers, government, and industry organizations.
2010-03-08
Article
NI VeriStand from National Instruments is a software environment for configuring real-time testing applications, including hardware-in-the-loop simulation, environmental and durability testing, dynamometer testing, and wind-tunnel testing.
2010-03-08
Article
The TM4 Motive electric powertrain features a permanent-magnet machine with 1.3 kW/kg (0.59 kW/lb) power density. It is designed to reduce vehicle development times and cost.
2010-03-08
Article
Featuring automatic mesh generation, CONVERGE automotive CFD software from Convergent Science simulates the fluid flow, spray, and combustion found within an internal-combustion engine.
2010-03-08
Article
The University of Houston Texas Diesel Testing & Research Center's services include pre-verification testing, technology screening, optimization of technologies, fundamental and applied research, concept development, and technology demonstrations.
2010-03-08
Article
At the 2010 SAE World Congress, Scuderi will show the latest iteration of its split-cycle engine prototype which is currently under test at Southwest Research Institute.
2010-03-08
Article
PREEvision from Aquintos is a CASE tool for the model-based development and evaluation of electrical/electronic architectures in motor vehicles or any kind of technical system equipped with distributed networked embedded systems.
2010-03-08
Article
Albonair’s selective catalytic reduction (SCR) system achieves optimum NOx emissions reduction by using a urea dosing system to adjust the reducing agent diesel exhaust fluid (DEF) droplet size depending on exhaust conditions.
2010-03-08
Article
AVL’s powertrain development process is aimed at significantly improving operating efficiency/economy, maintaining expected performance, and integrating advanced technology into the production process.
2010-03-08
Article
The Reactiv from CT Drives is an active alternator pulley that reduces NVH by decoupling the normal engine crankshaft vibrations and by firing strokes from the inertia of the alternator rotor.
2010-03-08
Article
The stochastic reactor modeling suite from cmcl innovations is an in-cylinder combustion and emissions simulator for internal-combustion engine applications.
2010-03-08
Article
Sealed, brushless 12- and 24-V dc SBL300 motors from Spal are suitable for axial fans and centrifugal blowers.
2010-03-08
Article
Formability results from Onward Technologies have successfully predicted dent resistance to optimize weight of exterior panels and offer an improved prediction of the physical part’s behavior during testing.