Criteria

Text:
Content:
Display:

Results

Viewing 6421 to 6450 of 9678
2010-03-15
Article
Daesung Electric’s Intelligent Human Vehicle Interface (IHVI) controller features a steering wheel haptic, Lumino console haptic, and haptic touch screen.
2010-03-15
Article
Inalfa Roof System's second-generation, bottom-load, integral multipanel roof systems can be inner or outer sliding systems and offer the same amount of exterior light into the vehicle as all-glass panel systems.
2010-03-15
Article
Inalfa Roof Systems offers a modular roof system (MORSE) designed to improve both small and large systems, including sunroofs and panoramic roofs.
2010-03-15
Article
Casmoly SH06-VX21 grease from Changam provides a low coefficient of friction of generated axial force in constant velocity joint applications.
2010-03-15
Article
Wuhan Youfin’s parking brake shoe features an increased area toward the shoe tip to support a wider lining for lower lining pressure in that region, as well as reduced crease lines in the platform surface for increased lining support and adhesive bonding.
2010-03-15
Article
The clinch joint, developed by Band-It and the Edison Welding Institute, is a mechanical method that joins dissimilar metal tubing using band clamps, and it can replace welding in some areas of the automobile.
2010-03-15
Article
The TECHSPEC lenses from Edmund Optics provide good transmission in the 345 to 700 nm range and minimize the spot size for polychromatic illumination in the 345 to 550 nm region.
2010-03-15
Article
Spectrum Advanced Specialty Products manufactures all components for its custom filtered and unfiltered connectors, including planar and tubular capacitors, shells, shields, seals, and grommets, allowing a standard lead time of 8-10 weeks and tight quality control.
2010-03-15
Article
Energy harvesting is used by ABB and Micropelt to replace the battery of a wireless sensor with a green, sustainable, maintenance-free power supply.
2010-03-15
Article
The PosiBand contact system from Positronic is qualified to SAE AS39029 and is suited for rugged environments.
2010-03-15
Article
NuinTEK’s dc Link Capacitor can be adjusted for hybrid-electric vehicles, reducing fuel consumption and decreasing emissions.
2010-03-15
Article
The Torino Chamber of Commerce promotes automotive industry development in Italy and worldwide, highlighting eco-sustainable urban mobility vehicle development, powertrain technologies, and Infomobility.
2010-03-15
Article
SK Lubricants' line of Yubase Plus oils offers improved quality over conventional oils. They are the base stock in various lubricant finishing products.
2010-03-15
Article
Shinhan Precision’s stamped fine blanking press technology is used to create a clutch piston for Magna Powertrain that replaces its current powder metal component.
2010-03-15
Article
Gowanda Electronics’ SMP1210S surface mount inductors combine high current, shielding, and small size with inductance values of 1.0 to 100 µH and current ratings of 205-1384 mA dc.
2010-03-15
Article
Construction materials, automotive parts, specialty films, and decorative sheets from Hanwha are made from the company's various composite materials.
2010-03-15
Article
Through five-layer extrusion technology, Sekisui S-lec combines sound insulation, solar control, and head-up display (HUD) functions into one multifunctional product known as SSF-W.
2010-03-15
Article
Yachiyo designs PZEV-compliant multilayer plastic fuel tanks.
2010-03-15
Article
IFP offers an integrated approach for predicting electric vehicle battery behavior, from improved electrochemical and thermal lumped-parameter modeling to the vehicle application as an alternative to equivalent circuit models.
2010-03-15
Article
Horiba’s electric motor test stand (EMTS) is a comprehensive system for electric motor development, validation, and durability.
2010-03-15
Article
A dynamic design of experiments (DoE) tool suite from IAV Automotive Engineering considers the time varying nature of input and output values to a model.
2010-03-15
Article
The Midwest Strategic Plastics Alliance Group is composed of four companies that represent the entire package in injection molding.
2010-03-15
Article
Arnold & Shinjo’s HR Rivet Nut is a solution for fastening high-strength metals or materials of any type, thickness, and hardness.
2010-03-15
Article
IAV Automotive Engineering has developed and integrated a vehicle simulation environment, VeLoDyn, into its system and control development process for hybrid and electric drive vehicles.
2010-03-15
Article
Eaton's new fuel-tank isolation valve effectively contains HEV evap emissions by isolating the fuel tank from the carbon canister under most conditions. It is expected to enter the market in MY2013.
2010-03-15
Article
Nissan is celebrating its 75th year of selling commercial vehicles in Japan, but the automaker's first production commercial van for the U.S. and Canadian markets will reach the marketplace later this year.
2010-03-15
Article
Terex says its new TA300 articulated dump truck is the only one in the 30-t (33-ton) market that has fully independent front suspension as standard.
2010-03-15
Article
cmcl innovations brings advanced stochastic reactor modelng (srm) technology to SAE World Congress.
2010-03-15
Article
Dana will be showcasing drivetrain solutions for front-end loaders, forklifts, and wheeled excavators.
2010-03-15
Article
A collaboration announced late last year may soon begin paying off for developers of electrified powertrains. At its SAE 2010 World Congress booth, simulation software provider CD-adapco will be discussing the imminent release of a program developed with its partner, Battery Design LLC.