Criteria

Text:
Content:
Display:

Results

Viewing 6301 to 6330 of 10311
2010-07-09
Article
Advantages that argue for a harder look at thermoplastics include energy savings, recyclability, and cost of materials.
2010-07-09
Article
Are more than two spindles—perhaps even four—for the simultaneous machining of workpieces economically more reasonable? Stama thinks so.
2010-07-09
Article
The launch of a completely new heavy-commercial-vehicle V8 diesel engine is a rare event. In September, Scania, a subsidiary of the Volkswagen Group, will launch a new 16.4-L V8 engine, in addition to the Swedish company's existing 15.6-L V8, at the top of its heavy-truck range.
2010-07-09
Article
Chrysler is the only Detroit-based OEM to have stuck with mass-airflow engine calibration because engineers believe it offers numerous advantages.
2010-07-09
Article
Check Corp. looks into ways to shape product development to enable the off-highway industry to focus its efforts on productivity.
2010-07-09
Article
The In-Sight 5605 high-resolution, self-contained vision system from Cognex offers power and flexibility for applications that require visualization of small defects in a large field of view.
2010-07-09
Article
Diamond Machine Works (DMW) has improved its speeds and feeds, cycle times, and programming time by rough-machining complex aluminum, stainless steel, and titanium aerospace and defense parts using tool paths generated with Celeritive's VoluMill.
2010-07-08
Article
Larson Electronics’ Magnalight.com adds to its range of explosion-proof and general area lighting with a line of LED lights smaller than a quarter.
2010-07-08
Article
In analyzing today's trends and how they will lead the off-highway industry to a successful tomorrow, SPAL believes airflow management is not going to exist as it did before.
2010-07-07
Article
Total Lubricants offers a range of Total Heavy Duty Lubricants products, spanning lubrication processes from fleets and the trucking industry to construction and farming equipment.
2010-07-07
Article
Alternative Fuel Technology LLC, a wholly owned subsidiary of Alternative Fuel Technologies, has been awarded a Phase 1 SBIR contract from the U.S. Army to concept, design, and demonstrate an ultrahigh pressure, intensified fuel-injection system for use with JP-8 fuel.
2010-07-07
Article
Green proponents from Taiwan are on a show-and-tell mission aimed at boosting interest in electrified vehicles at home and abroad.
2010-07-07
Article
Six different single-occupant vehicles designed and built by teams of collegiate engineering students snared four-digit fuel economy at Eaton Corp.'s Marshall, MI, test track during the 31st annual SAE Supermileage competition.
2010-07-07
Article
The Hydronic 5 from Espar Heater Systems is an engine preheating solution featuring automatic, programmable heat regulation.
2010-07-07
Article
Baumer's OADM 250 optical laser distance sensor was designed to detect target objects regardless of surface properties or color at distances from 0.2 to 4 m (0.66 to 13 ft).
2010-07-07
Article
XR-S and XR-D control wire feeders from Miller Electric Manufacturing provide push-pull wire feeding capabilities up to 135 ft from a power source.
2010-07-07
Article
Through the economic downturn, Sauer-Danfoss took into account upcoming regulations and standards as it continued its testing and research work.
2010-07-07
Article
NHTSA (U.S. National Highway Traffic Safety Administration) is seeking public input for help in deciding whether to require automakers to install reminder technology for use of rear seatbelts. A petition to that effect has been submitted by Public Citizen and Advocates for Highway and Auto Safety.
2010-07-07
Article
Dana sees opportunity to more closely collaborate with OEMs and ensure a higher level of end-user satisfaction by evolving from a drivetrain systems supplier into a comprehensive mobility partner.
2010-07-07
Article
High-temperature power electronics have become a vital aspect of future designs of compact power converters for applications including power conditioning and distributed motor/actuator controls. But the development of high-temperature capacitors has lagged far behind other system components (e.g., semiconductor switches that can operate at temperatures >200°C), according to researchers from TRS Technologies.
2010-07-06
Article
Allison Transmission Inc. has dedicated a new manufacturing plant in Indianapolis that will increase the nation's capacity to manufacture cost-efficient, fuel-efficient commercial-duty hybrid truck propulsion systems.
2010-07-06
Article
Sonceboz believes the legal incentive behind meeting Tier 4 Final acts as a stimulus for global creativity to solve emissions control challenges.
2010-07-06
Article
A high-performance fire- and heat-resistant coating from AkzoNobel Aerospace Coatings is now available in the global range. The coating, ref 64C1-2-A , is typically applied to aircraft engine nacelles, components, and assemblies that can be regularly exposed to temperatures up to 315°F but can survive peak exposure to 1500°F for 15 min.
2010-07-06
Article
AVX's lead-free switch mode power supply stacked capacitors provide high capacitance values with low ESR ratings for high current/ripple applications.
2010-07-06
Article
A rear drive axle from ArvinMeritor was designed specifically for terminal tractor applications.
2010-07-06
Article
PowerTech PVX and PSX 9.0L 56 kW (75 hp) and above engine models from John Deere Power Systems have received Interim Tier 4/Stage III B certifications.
2010-07-06
Article
Grote Industries introduces a rugged version of the Trilliant 36 LED WhiteLight conversion bulb for adverse environments.
2010-07-06
Article
Asahi Kasei Plastics offers Thermylene P8 compounded polypropylene (PP) resin with improved creep resistance at room temperatures.
2010-07-06
Article
Lotus Engineering conducted a study replacing mild steels with high-strength steels in the body in white (BIW) of a crossover utility vehicle—a 2009 Toyota Venza. The HSS-intensive BIW was about 16% lighter—and 2% cheaper.
2010-07-01
Article
Lear Corp. aims to play a major role in vehicle-electrification technologies. The company has boosted its engineering resources and is focusing product development on power distribution, energy management systems, and vehicle charging technologies.
Viewing 6301 to 6330 of 10311