Criteria

Text:
Content:
Display:

Results

Viewing 6121 to 6150 of 10150
2010-07-13
Article
Airbus and Magellan Aerospace (U.K.) Ltd. signed an agreement securing a further major work package on Airbus' new A350 XWB, which is expected to generate revenues in excess of $60 million over the next 10 years.
2010-07-13
Article
Today's challenges are closely related to the economic use of resources and the preservation of the environment, requiring efficient drive solutions with optimum fuel utilization and minimized environmental impact due to emissions.
2010-07-13
Article
Federal-Mogul says its focus is on innovation and technical expertise to help its customers’ develop next-generation products that meet tough demands for government, customer, and market performance.
2010-07-12
Article
Structural analysis by Grupo TAM gives engineers a better take on tolerances.
2010-07-12
Article
The Boeing Co. selected National Technical Systems Inc.’s Test Systems Engineering Division to provide Automated Test Equipment (ATE) systems in support of its 777 program. The ATE systems will perform tests on 777 systems, avionics, and engines using automation to quickly perform measurements and evaluate the test results.
2010-07-12
Article
The Office of Naval Research awarded a contract to Raytheon Co. to develop next-generation phase-change cooling system technology for the U.S. Navy. The Advanced Naval Cooling System (ANCS) program will develop system level solutions for implementing phase-change cooling technologies in future naval combatants.
2010-07-12
Article
After initiating a companywide mandate to look at overall equipment effectiveness (OEE) to improve productivity, Héroux-Devtek decided on a Memex solution.
2010-07-12
Article
Northrop Grumman Corp. has been selected to provide IR missile warning systems (IRMWS) and processors to the Naval Air Systems Command (NAVAIR) in support of medium and heavy lift helicopter fleets. Under the terms of the $80 million contract, Northrop Grumman will deliver more than 450 IRMWS and 90 processors to NAVAIR beginning in May 2011 and concluding in the second quarter of 2013.
2010-07-12
Article
The Boeing Co. has agreed to acquire Argon ST, a developer of command, control, communications, computers, intelligence, surveillance, and reconnaissance (C4ISR) and combat systems. Fairfax, VA-based Argon ST develops sensors and networks designed to exploit, analyze, and deliver information for real-time situational awareness.
2010-07-12
Article
In-cut machining cycle times of 50-100 h are common. Achieving meaningful reduction of cycle time while maintaining part quality is predicated upon the ability to model the physics of the machining operations.
2010-07-12
Article
Trendsetter dB Super E-spec tires from Yokohama are comprised of 80% orange oil and renewable raw materials.
2010-07-12
Article
As telematics moves toward the mainstream, providers are searching for more ways to bring value. Many are beginning to explore the potential for improving safety.
2010-07-12
Article
Touch-screen input is rapidly becoming a mainstay in automotive human/machine interfaces, prompting component makers to beef up their development efforts. Analysts predict that demand for touch screens will outpace voice over the next few years.
2010-07-12
Article
As brighter headlights have become more common, systems that keep them directed properly down the roadway have gained popularity and in some cases have been mandated by government regulation. The headlight-leveling systems that keep bright lamps from blinding oncoming drivers are rapidly evolving into adaptive systems that shift directions during turns.
2010-07-12
Article
Flush-to-vehicle exterior door handles and frameless rearview mirrors are patent-pending technologies from Magna that will be production-ready in 2012.
2010-07-09
Article
The MCRT 79700V Series dual range torquemeters from S. Himmelstein feature two ranges with independent outputs.
2010-07-09
Article
Heise precision pressure instruments are used in specialty process applications and as calibration standards to provide the accurate measurements required for critical test, calibration, and process applications.
2010-07-09
Article
Kubotek USA’s KeyCreator version 9, distributed in Germany by Infotech, is a 3-D direct modeller that enables users to be creative, practical, and efficient in their designs.
2010-07-09
Article
The EPCOS MiniCell pressure sensor transmitters from TDK-EPC have an extended range and are claimed to be the world’s smallest media-separated differential pressure transmitters, measuring 19.6 x 16.2 x 11 mm3.
2010-07-09
Article
Advantages that argue for a harder look at thermoplastics include energy savings, recyclability, and cost of materials.
2010-07-09
Article
Are more than two spindles—perhaps even four—for the simultaneous machining of workpieces economically more reasonable? Stama thinks so.
2010-07-09
Article
The launch of a completely new heavy-commercial-vehicle V8 diesel engine is a rare event. In September, Scania, a subsidiary of the Volkswagen Group, will launch a new 16.4-L V8 engine, in addition to the Swedish company's existing 15.6-L V8, at the top of its heavy-truck range.
2010-07-09
Article
Chrysler is the only Detroit-based OEM to have stuck with mass-airflow engine calibration because engineers believe it offers numerous advantages.
2010-07-09
Article
Check Corp. looks into ways to shape product development to enable the off-highway industry to focus its efforts on productivity.
2010-07-09
Article
The In-Sight 5605 high-resolution, self-contained vision system from Cognex offers power and flexibility for applications that require visualization of small defects in a large field of view.
2010-07-09
Article
Diamond Machine Works (DMW) has improved its speeds and feeds, cycle times, and programming time by rough-machining complex aluminum, stainless steel, and titanium aerospace and defense parts using tool paths generated with Celeritive's VoluMill.
2010-07-08
Article
Larson Electronics’ Magnalight.com adds to its range of explosion-proof and general area lighting with a line of LED lights smaller than a quarter.
2010-07-08
Article
In analyzing today's trends and how they will lead the off-highway industry to a successful tomorrow, SPAL believes airflow management is not going to exist as it did before.
2010-07-07
Article
Total Lubricants offers a range of Total Heavy Duty Lubricants products, spanning lubrication processes from fleets and the trucking industry to construction and farming equipment.
2010-07-07
Article
Alternative Fuel Technology LLC, a wholly owned subsidiary of Alternative Fuel Technologies, has been awarded a Phase 1 SBIR contract from the U.S. Army to concept, design, and demonstrate an ultrahigh pressure, intensified fuel-injection system for use with JP-8 fuel.
Viewing 6121 to 6150 of 10150