Criteria

Text:
Content:
Display:

Results

Viewing 6061 to 6090 of 9681
2010-06-04
Article
Caterpillar offers the Cat C15 and C18 Acert industrial power units for improved efficiency and maximum uptime in multiple engine ratings.
2010-06-04
Article
Perkins Engines completes its Tier 4 Interim/Stage IIIB product range with the 854 Series four-cylinder, 3.4-L engine.
2010-06-04
Article
Parker Hannifin’s Parflex electrically heated selective catalytic reduction (SCR) hose assemblies were designed for heating and conveying diesel exhaust fluid throughout the SCR system on commercial vehicles.
2010-06-04
Article
Parker Hannifin offers a line of aluminum tube fittings an estimated 65% lighter than equivalent stainless fittings to provide fuel, freight, and vehicle-transfer savings.
2010-06-03
Article
The Mathworks' Simulink PLC Coder generates IEC 61131 structured text for programmable logic controller and programmable automation controller devices.
2010-06-03
Article
Brennan Industries' stainless steel O-ring face seal and flange adapters offer improved corrosion resistance and sealing for critical, harsh-duty applications.
2010-06-03
Article
At 5 kg (11 lb) for the complete underbody of a luxury saloon, Röchling Automotive is setting the benchmark for covers using Seeberlite structural material applied with a new process called Softlofting.
2010-06-02
Article
President Barack Obama on May 21 signed a presidential memorandum directing the U.S. EPA and the U.S. Department of Transportation to develop a National Policy that for the first time will put CAFE and greenhouse-gas limits on medium- and heavy-duty trucks.
2010-06-02
Article
Average European new-car CO2 emissions are falling at a faster rate than ever before and are on course to meet 2015 EU targets, according to automotive intelligence firm Jato Dynamics. The company says last year saw the greatest single-year decline in average CO2, as the urge to put cleaner cars on the road was accelerated by the rich mix of customer demand for more fuel-efficient vehicles, the introduction of CO2-based taxes in some markets, and national scrappage schemes across Europe favoring smaller, cleaner cars.
2010-06-02
Article
Select 1- and 2-wire braid and 4-spiral Weatherhead Diamond Advantage hose styles from Eaton have been re-engineered to offer improved working pressures and temperature ratings and feature a durable hose cover for abrasion resistance.
2010-06-01
Article
The Specht 500/630 horizontal machining center from Mag provides linear-motor or ballscrew drives, CAT-40 through HSK-100 tool interfaces, six spindle options, four control options, and three five-axis configurations to suit needs ranging from one-off work in job shops to agile machining lines.
2010-06-01
Article
tesa tape’s tesa 50650 and tesa 50600 specialty products with silicone adhesive systems were developed for specialty masking and holding applications.
2010-06-01
Article
A family of water-based sol-gel coatings from Boeing were developed to replace conventional finishing materials and processes. One formulation, Boegel-EPII, is a nonhazardous coating that can be applied to a range of substrates (aluminum, titanium, nickel, steel) using a variety of methods (dip, immersion, spin, brushing, spraying). Applications beyond adhesion promoter include corrosion control and conductive coatings.
2010-06-01
Article
Boeing and PetroChina, together with representatives of the Chinese energy sector and the global aviation industry, signed an agreement to evaluate establishing a sustainable aviation biofuels industry in China.
2010-06-01
Article
The PI3101 Cool-Power dc-dc converter from Picor is a high-density isolated device that delivers 60 W at half the size of existing units.
2010-06-01
Article
NDK’s commercial, off-the-shelf frequency control products include crystals, temperature-compensated crystal oscillators, voltage-controlled crystal oscillators, surface acoustic wave devices, and frequency-controlled crystal oscillator modules.
2010-06-01
Article
Science Applications International Corp. (SAIC) will lead a team to pursue the U.S. Army’s Ground Combat Vehicle (GCV) program. The SAIC-led team, called Team Full Spectrum, submitted its proposal for the technology development phase of the Infantry Fighting Vehicle (IFV) being developed under the GCV effort and is competing for one of an anticipated three contract awards.
2010-06-01
Article
Simulia’s Abaqus 6.10 provides FEA and multiphysics capabilities for realistic simulation.
2010-06-01
Article
The European Union on May 1 published an amendment to type approval requirements to permit some of the mandated tests to be carried out by the manufacturer themselves, according to InterRegs, an online resource for global vehicle safety and emissions regulations.
2010-05-28
Article
John Deere (China) Investment Co. Ltd. has awarded Kuehne + Nagel a contract for the management of its national service parts distribution center in Tianjin, where Deere has centralized all after-sales services to better serve its dealers and optimize service parts management in China.
2010-05-28
Article
Former World Rally Championship, McLaren F1, and BMW engineers offer input on the design and development of a new military vehicle to meet not only Ministry of Defence requirements for a Light Protected Patrol Vehicle but also for such vehicles in other parts of the world.
2010-05-28
Article
Road test program of new grid-enabled hybrid prototype will help engineers develop the commercial model to come.
2010-05-28
Article
The highly flexible multichannel AS8510 from austriamicrosystems features zero offset for simultaneous voltage, current, and temperature measurement in conventional, hybrid, or electric vehicles.
2010-05-28
Article
Electrical Wiring Interconnect Systems compliance requirements can have a huge impact on cost if not anticipated from the very beginning of an aircraft design project.
2010-05-28
Article
Shell Oil is using telematics to help commercial transport fleet owners in Europe manage fuel consumption. In May it tapped Airbiquity as the solution integrator for its Shell FuelSave Partner program.
2010-05-28
Article
Instead of the usual two or more weeks needed to mesh, assemble, and simulate a vehicle crash finite-element model, a demonstration of the entire CAD-to-crash process was done in a day.
2010-05-28
Article
Mitsubishi Motors Corp. and PSA Peugeot Citroën have agreed to another collaboration, the most recent one (announced April 28) on development of a compact SUV. The agreement provides for the development and adaptation for both the Peugeot and Citroën marques of a compact SUV, based on an existing Mitsubishi platform.
2010-05-27
Article
Sophisticated control algorithms help the PowerShift DSG to maintain driveability in the 2011 Fiesta, while keeping the clutch pack from overheating. Virtual sensing is used instead of a transmission temperature sensor.
2010-05-27
Article
Hitachi Construction Machinery partnered with Cinterion Wireless Modules and Telenor Connexion in the development of the tracking and tracing platform used on its construction and mining equipment.
2010-05-27
Article
Toshiba's Storage Device Division has designed a hard disk drive (HDD) with 200 GB of storage capacity in a single-platter design.