Criteria

Text:
Content:
Display:

Results

Viewing 5881 to 5910 of 10097
2010-08-26
Article
Scoma specializes in the design, dynamic tests, and manufacturing of safety parts for large, medium, and small series products.
2010-08-26
Article
Tube Fab/Roman Engineering has designed a high-performance engine oil pick-up tube assembly for diesel and gasoline engines.
2010-08-26
Article
BTLI insulated torsion exhaust bellows from Tru-Flex Metal Hose offer both an interlock hose liner and an insulation blanket between the liner and bellows and provide a flexible decoupler.
2010-08-26
Article
Metaltemple Aquitaine produces cylinder liners for diesel engines in centrifugally cast ferrous materials, such as lamellar, high boron, and high-strength gray iron grades.
2010-08-26
Article
Inoplast Business Unit Composites specializes in the complete design and manufacturing of components for the trucking industry.
2010-08-26
Article
EEMI silicone hoses are available in a temperature range from -80 to +300°C (-112 to +572°F).
2010-08-26
Article
ETAS offers the ES720 drive recorder, a rugged, PC-based device that provides on-demand access to and capture of critical vehicle system and subsystem data.
2010-08-26
Article
The aPriori 2010 r2 product release integrates manufacturing processes including permanent mold casting, wire electrical discharge machining, closed die forging, grinding, and heat treatment.
2010-08-26
Article
To meet the demand for electrically driven pumps, MMT has developed a family of three-phase brushless dc motors delivering a respective 5 W to 1 kW mechanical power in a three- and six-coil design.
2010-08-26
Article
Emerging standards are helping engineers in the push to improve vehicle safety, providing methodologies that ensure that safety systems respond promptly and correctly on the rare occasions that they will be needed.
2010-08-26
Article
The 3008 HYbrid4 crossover enters production in early 2011 as the world's first diesel-hybrid passenger car. GKN Driveline engineers developed the vehicle's electric rear-drive module and electromagnetic disconnect clutch.
2010-08-26
Article
LMS provides a combination of 3-D and 1-D system simulation solutions that enable companies to address challenges driven by ecology trends and changing needs.
2010-08-26
Article
Vector’s VN8900 network interface system for CANoe/CANalyzer real-time applications is based on the company's XL-Interface.
2010-08-26
Article
The quad-core DS1006 processor board from dSPACE features an AMD Opteron 2.8-GHz processor to increase the power of hardware-in-the-loop (HIL) simulation.
2010-08-26
Article
The Sonceboz 42XX series torque motor is a robust brushless rotary actuator designed for heavy-duty engine control applications that require extended life and are exposed to harsh environments.
2010-08-26
Article
Capricorn Automotive offers crankshafts that feature innovative materials and technologies and adhere to industry requirements.
2010-08-26
Article
The MicroDisplay from Grayhill is a 3D series display for monitoring data on CAN bus-connected off-highway vehicles.
2010-08-26
Article
Alto Products offers Carbonite G2, a non-asbestos, organic-based friction material with impregnated carbon graphitic particles.
2010-08-26
Article
The Phoenix International modular gateway offers mobile communications and processing integrating GPS and GPRS data and onboard machine communications.
2010-08-26
Article
Elobau Sensor Technology offers the 361G as part of its range of modular joystick grips.
2010-08-26
Article
Dow Automotive Systems' BETAFILL 55 and BETAMATE 65 adhesive/seam sealer products are suitable for use in commercial vehicle applications.
2010-08-26
Article
The FMCWS-650F-HYD max series pumps from Ace Pump feature the Oasis WetSeal technology system, which prevents run-dry and abrasive-wear seal failures by isolating seals from the pumped liquid.
2010-08-26
Article
Infineon Technologies’ AUDO MAX family of 32-bit microcontrollers (MCUs) provides high performance and real-time capabilities for automotive powertrain and chassis applications.
2010-08-25
Article
NHTSA (U.S. National Highway Traffic Safety Administration) is proposing to amend the federal motor vehicle safety standard (FMVSS) on occupant crash protection (FMVSS No. 208) to require lap/shoulder seatbelts for each passenger seating position in new motorcoaches.
2010-08-25
Article
Wolverine's MicroCool Division and Niagara Thermal Products have entered into a strategic collaborative alliance, focusing on the joint development of custom-engineered, aluminum cold plates for liquid cooling systems in complicated electronic devices for the global aerospace and defense markets.
2010-08-25
Article
Intelsat S.A. awarded a contract to Boeing to provide a second ultra-high frequency (UHF) payload on another of the four commercial communications satellites that Intelsat ordered from Boeing last year.
2010-08-25
Article
The U.S. Coast Guard awarded prime contractor EADS North America a $117 million contract for three HC-144A Ocean Sentry Maritime Patrol Aircraft, with options for up to six more aircraft over the next four years.
2010-08-25
Article
The U.S. Army Contracting Command Contracting Center, Redstone Arsenal, AL, awarded General Dynamics Armament and Technical Products a contract for the production of the 2.75-in Hydra-70 rocket system.
2010-08-25
Article
Raytheon Co. was awarded a task order for total logistics support of the Battle Command Sustainment Support System (BCS3) under the Battle Command Development indefinite-delivery, indefinite-quantity contract.
2010-08-25
Article
The U.K. Ministry of Defence awarded Lockheed Martin a $5.1 million contract for additional Desert Hawk III UAVs. Desert Hawk III's improved payloads maximize target detection and recognition by providing 360°—daytime and nighttime—coverage in a common turret package.
Viewing 5881 to 5910 of 10097