Criteria

Text:
Content:
Display:

Results

Viewing 4861 to 4890 of 10156
2011-07-12
Article
Curtiss-Wright Controls offers the VPX6-490 general purpose graphics processing unit (GPGPU) multicore engine application accelerator featuring dual NVIDIA GPUs based on Fermi architecture.
2011-07-11
Article
The U.S. Air Force's Technical Applications Center (AFTAC), based at Patrick Air Force Base in Florida, awarded a six-year Expert Scientific and Analytical Support (ESAS) contract worth up to $36.5 million to QinetiQ North America.
2011-07-11
Article
Wyle's Huntsville, AL, operations have been updated with the construction of a new drive-in environmental test chamber designed to operate over a wide range of temperature and humidity conditions. Types of test articles that Wyle can support in the chamber include Humvees, satellites, automobiles, energy equipment, bulldozers, missiles, and other military and commercial vehicles.
2011-07-11
Article
Saab AB has announced a definitive agreement to acquire Sensis Corp., a provider of air traffic management (ATM) solutions and surveillance technologies for the global civil aviation and defense industries, for approximately $155 million.
2011-07-11
Article
Jaguar has taken the XF's PSA-derived diesel, turned it through 90 degrees for longitudinal installation, and extensively re-engineered it for greater efficiency, lower noise levels, and stop/start operation. The -S version of the XKR gets 10% more power and torque.
2011-07-11
Article
The new Prius v will share the Hybrid Synergy Drive with its predecessor but offer more than double the cargo volume.
2011-07-08
Article
General Motors, Ford, and BMW test thermoelectric devices that recapture energy lost in car exhaust.
2011-07-08
Article
Guangxi Yuchai Machinery Co. Ltd. (GYMCL), the main operating subsidiary of China Yuchai International Ltd., claims to have recently introduced China’s first prototype diesel engine compliant with Euro VI emissions standards.
2011-07-08
Article
ElectriPlast-CF66 electrically conductive, resin-based material from Integral Technologies offers a 50 to 60% weight reduction over traditional metals and was designed to meet demanding electromagnetic requirements.
2011-07-08
Article
Overall initial quality of MY2011 vehicles has improved, with the improvement among carryover models outstripping the degradation of initial quality among newly launched models, according to J.D. Power and Associates' 2011 U.S.
2011-07-07
Article
Helsinki, Finland-based Rautaruukki (Ruukki) will supply its wear-resistant special steel Raex 400 to Caterpillar for use in the main body structure of the company’s articulated dump trucks (ADTs), considered to be one of the most demanding applications for wear-resistant steel due to the continual impact and wear experienced.
2011-07-07
Article
Mocap offers tear tab caps designed to fit over threaded tubing, rods, and fittings.
2011-07-07
Article
The pneumatically powered Famatec Friendly ergonomic manipulator from Haeco precisely counterbalances heavy loads to allow an operator to suspend, rotate, tilt, and transfer product with precision.
2011-07-07
Article
As configured for Chrysler use, the 8HP has fewer parts than ZF's 6-speed automatic, weighs less than Chrysler's 5-speed, and is ready to add a stop-start feature when needed. Its overall ratio spread of 7.03 is one key to impressive efficiency.
2011-07-01
Article
An electrical brushless diesel fuel pump from Federal-Mogul offers improved durability to keep on- and off-highway heavy-duty vehicles working longer.
2011-07-01
Article
Waytek's ATO/ATC fuse blocks feature a compact design for flexibility when mounting in limited space compartments.
2011-06-30
Article
The regular gasoline 1.6-L EcoBoost engine available in the Ford Focus has been given what the company describes as an impressively sporty growl under hard acceleration using a sound symposer.
2011-06-30
Article
Harris Corp. and Tektronix Component Solutions have established a strategic partnership agreement. The agreement, in effect now, is intended to enhance collaboration, share technology and strategy development, improve program execution, and, ultimately, enable greater growth for both companies.
2011-06-30
Article
Plasan, a producer of composite materials for defense and automotive clients, has acquired KaZaK Composites, a Massachusetts-based engineering design and manufacturing company specializing in pultrusion processing.
2011-06-30
Article
TECT Power, a supplier of gas turbine engine components, has established a partnership with MTU Aero Engines of Germany. TECT Power will serve as the sole outside supplier of MTU-designed high-pressure compressor integrally bladed rotors (IBRs) for Pratt & Whitney PurePower engines.
2011-06-30
Article
Boeing and American Airlines announced that the airline will be the launch customer for the ecoDemonstrator Program. The American Airlines 737-800 and a twin-aisle airplane that will be announced at a later date are serving as the flight test component for the U.S.
2011-06-29
Article
As the deadline for tighter emissions regulations looms closer, Perkins has upgraded its popular 400 Series engine to meet regulations that go into effect in 2013. The 400F meets Tier 4 Final / Stage IIIB regulations while requiring only minor changes for mounting.
2011-06-29
Article
Hamilton Sundstrand Corp. and Microturbo signed an agreement to form a partnership for the development of new-generation electrical and bleed APUs and APU installation systems, targeting the business jet segment.
2011-06-29
Article
Northrop Grumman Corp. and SELEX Galileo signed a memorandum of understanding to jointly pursue the international directional IR countermeasures (DIRCM) market. The MOU further strengthens the existing DIRCM strategic alliance and enables the two companies to aggressively target the "rest-of-the-world" DIRCM marketplace.
2011-06-29
Article
Aerojet, QinetiQ, and EADS Astrium Crisa announced that the companies have entered into a joint agreement to supply the XENITH (Xenon Ion Thruster) ion propulsion system to the worldwide commercial spacecraft market.
2011-06-29
Article
Aleris has signed a five-year contract to provide aluminum plate and sheet in a range of alloys to Airbus for its global programs. The agreement covers supply for the years 2012 through 2016. The agreement also includes the development of a recycling program, where Aleris will recycle scrap for Airbus.
2011-06-29
Article
Electro-Mech’s SW44752 split-image switch assembly offers night vision imaging system compatibility by incorporating night vision goggle green-B light filters into its Series 600 quad lamp/LED push-button switch series.
2011-06-29
Article
SSI Technologies' selective catalytic reduction system diesel exhaust fluid combination sensor monitors urea level, temperature, and concentration and is designed to meet emissions regulations for on- and off-road OEMs.
2011-06-28
Article
The A8516 multi-output white LED/RGB (red/green/blue) driver from Allegro MicroSystems is an integrated-circuit LED driver for backlighting medium and large LCD monitor displays.
2011-06-28
Article
MapleSim 5, the latest release of Maplesoft’s physical modeling and simulation software, features a broader application scope, streamlined modeling environment, and the ability to efficiently simulate even more systems.
Viewing 4861 to 4890 of 10156