Article
2016 SAE Congress: Engineering education gets industry boost
2016-04-14
Clemson University's Deep Orange program may be the new benchmark in industry-mentored collaborative engineering education.
Search Results
Article
/news/2016/04/connected-vehicles-will-be-hackers-trophy
2016-04-14
Article
2016 SAE Congress: Clemson University and Toyota unveil uBox concept
2016-04-13
A concept vehicle engineered by Clemson University graduate students features a curved glass roof with a multi-material support structure produced by a novel manufacturing technique.
Article
Safety symposium cites training and technology to reduce teen fatalities, accidents
2016-04-07
Annual New York Auto Show Traffic Safety Symposium points to high fatality and injury rate among teens, while University of Bridgeport design school students propose technology solutions and Ford discusses impaired driving simulator "suits.
Article
Audi claims first production e-boosting on 2017 SQ7
2016-03-07
The electric-powered compressor complements a pair of sequential turbos. The flagship SQ7 also boasts 48/12V electrical system to power the e-booster and the car's EAWS.
Article
Boeing comes clean with self-cleaning lavatory
2016-03-19
There are no exceptions or limitations to where innovations in advanced sensors and other technologies can be introduced in modern aircraft.
Article
GE’s clean-sheet turboprop engine to launch with Textron Aviation
2015-11-30
GE Aviation is combining the expertise from its turboprop facility in the Czech Republic, along with ground-breaking technologies courtesy of its military and commercial jet engines, to pursue new turboprop engines.
Article
TRB turns composites focus to aerospace sector
2015-10-12
TRB Lightweight Structures recently released an aerospace-grade lightweight honeycomb composite panel designed for interior applications, expanding the application areas for its range of composite flat panels. Recent investments for manufacturing composites include the procurement of a new 3- x 1.5-m autoclave system.
Article
Engineering a 1000-mph car
2015-10-16
That is the task of Mark Chapman, Chief Engineer of the U.K. supersonic Bloodhound Project and his team, now on course to attempt a new World Land Speed Record that at Mach 1.4 blends automotive and aerospace engineering technologies to achieve a spectacular target never before considered outside the realms of space fiction.
Article
Evaluating new forestry machines in a fraction of the time
2015-10-28
Skogforsk (the Forestry Research Institute of Sweden) has funded a KTH research initiative intended to help improve the suspension of forestry machines with the goal of achieving significant productivity improvements. KTH’s mission is to streamline the design process by validating the capability to simulate the operation of forestry machines under real-world operating conditions.
Article
Stanadyne introduces diesel products to improve off-highway emissions in India
2015-10-02
Article
Prius is re-engineered on Toyota New Global Architecture
2016-01-11
The 2016 Prius is longer, lower, and wider, and special attention was paid to the gasoline portion of the car’s gasoline-electric drivetrain with a claimed 40% thermodynamic efficiency for the Atkinson cycle 2ZR-FXE 1.8-L I4 naturally aspirated gasoline engine, a number that rivals turbodiesels.
Article
SAE Eye on Engineering Quick Take: VW's digital fraud
2015-10-09
Article
SAE Eye on Engineering Quick Take: Touring an EV Battery Plant
2015-11-11
Article
BorgWarner tech center adds testing muscle, engineering resources
2015-11-02
Additional in-house testing capabilities and the hiring of 180 engineers and technicians underscores an ambitious strategy to reach $15B in annual sales by 2020.
Article
2017 Ford Escape gains major NVH, powertrain, connectivity upgrades
2015-11-18
There’s a lot of investment and engineering behind this mid-cycle refresh, illustrating the white-hot competition in the compact SUV segment.
Article
Surface Generation speeds composites throughput with one-shot stamp-forming process
2015-12-03
The U.K.-based supplier is working with research group WMG and AGC AeroComposites to develop new composite press-forming processes for automotive and aerospace manufacturers. Patented technology makes it possible to achieve one-minute Takt times for thermoplastic components.
Article
NASA team completes third phase of UAS flight testing
2015-10-03
Technologies considered necessary for unmanned aircraft systems (UAS) to safely avoid other aircraft while moving through airspace recently were put to the test using NASA's remotely piloted Ikhana aircraft.
Article
Engineering simulation tool
2016-03-07
Engineers across disciplines will realize step-change improvements in the way they develop products using ANSYS 17.0.
Article
Data processing system for acoustics and vibration
2016-04-13
The nCode brand of durability, test, and analysis software by HBM introduces nCode VibeSys, a new data processing system designed to help acoustics and vibration engineers.
