Criteria

Text:
Content:
Display:

Results

Viewing 3331 to 3360 of 10229
2013-02-22
Article
Boeing and Istanbul Technical University (ITU) reached an agreement to launch joint research and development programs. In addition, Boeing and ITU announced their first joint project: a one-year effort to research and develop an advanced air-filtration system to enhance air quality for passengers in commercial airplane cabins.
2013-02-21
Article
SMILE FC System Corp. (“SMILE FC”), a joint venture between U.K.-based Intelligent Energy and Suzuki Motor Corp. has established a ready-to-scale production plant for its fuel-cell systems in Yokohama, Japan.
2013-02-21
Article
McLaren Automotive's new P1 plug-in hybrid supercar, to be unveiled at the 2013 Geneva Motor Show, will be propelled by a "substantially revised" 3.8-L twin-turbo V8 gasoline engine coupled to an electric motor—a powertrain combination generating a claimed 916 PS (903 hp) and 900 N·m (664 lb·ft).
2013-02-21
Article
David Mason, Vice President of Global Automotive for Altair Engineering, discusses how modeling and FE analysis tools can help engineers optimize their structural composite designs—and ultimately "catalyze composites growth" in the automotive sector.
2013-02-20
Article
"Supercapacitor" system is expected to arrive in the Mazda6 for July 2013 delivery to dealers. Tests show a 10% fuel-economy improvement in stop-and-go driving.
2013-02-19
Article
Good news for electro-mechanical engineers, control systems engineers, and software engineers. The automotive industry needs those skills sets.
2013-02-19
Article
General Motors reprises the late, lamented, Holden-based Pontiac G8 with another V8/rear-drive performance sedan based on the corporate global RWD architecture. The SS, developed by teams located in Australia and the U.S., initially will be built at Holden's Australia plant and will not use the new direct-injected LT1 V8.
2013-02-19
Article
Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.
2013-02-19
Article
With an initial focus on autonomous driving and connected cars, the Renault-Nissan Alliance on Feb. 18 celebrated the official opening of a Silicon Valley advanced research center. Located in Sunnyvale, CA, the NRC-SV is part of Nissan's global strategy to expand and localize its R&D function in strategic markets.
2013-02-19
Article
A lightweight HSS frame intended for use in long-haul transport is claimed to weigh 30% less than conventional truck frames. The concept was developed and optimized by Engineering Center Steyr, Magna Powertrain’s R&D center for truck engineering in cooperation with Cosma International.
2013-02-19
Article
When it comes to dc circuits, load bank testing provides a more controlled approach to simulating testing procedures, according to Intertek.
2013-02-19
Article
Grail Engine Technologies Inc.’s new internal-combustion engine, which was designed, developed, and patented by the company, integrates the best characteristics of the traditional two-stroke engine with those of the four-stroke engine.
2013-02-19
Article
STAR-CCM+ v8 is a new version of CD-adapco’s integrated solution for multidisciplinary engineering problems.
2013-02-18
Article
The projected growth of global commercial aviation requires a more efficient way to keep airplanes flying reliably: new technical capabilities have emerged to support this upcoming expansion.
2013-02-18
Article
Flow Technology Inc.’s microLinK CANbus smart pickoff for turbine flow meters features an enhanced amplifier design and better overall performance than standard pickoffs.
2013-02-18
Article
Positronic Industries has added an 8.20-mm low-profile version to its Scorpion power/signal connector series.
2013-02-18
Article
The OM-CP-PR140 pressure data logger from Omega is designed for use in autoclave validation and mapping.
2013-02-18
Article
Suitable for automotive applications including engine performance and durability, noise, vibration, and harshness (NVH), and crash safety analysis, Rescale’s cloud simulation platform is fully secure. It permits its customers to run large-scale designs of experiment and multidisciplinary optimizations for computationally intense problems.
2013-02-18
Article
Software Cradle’s Cradle SC/Tetra v10 general-purpose, unstructured grid CFD software features a robust pre-processor with integrated geometry repair tools and a flexible, controllable, and fully parallelized hybrid grid generator that makes for exceptionally fast meshing.
2013-02-18
Article
UniWest Corp.’s US-525M single- or multi-channel eddy current instrument is designed to detect surface defects in metals, and its exceptional signal-to-noise ratio enables the unit to detect smaller flaws that other instruments may miss.
2013-02-18
Article
Ricardo Strategic Consulting (RSC), the global management consulting subsidiary of Ricardo PLC, announced Feb. 13 that Mark Kuhn has been promoted to principal and will join the RSC-North America leadership team.
2013-02-15
Article
By offering VM Motori's 3.0-L turbodiesel V6 with the 8R70 automatic and a host of related technologies, Chrysler aims for genuine 30-mpg capability in its light duty full-size pickup. The strategy is to beat Ford's hugely successful F-150 Ecoboost in performance and fuel efficiency.
2013-02-15
Article
The goal of research under Maplesoft and Toyota's Symbolic Control project is implementation of symbolic design and analysis methods for linear, nonlinear, and parametric robust control.
2013-02-15
Article
On an equivalent energy basis, motor gasoline (which contains up to 10% ethanol) was estimated to account for 99% of U.S. light-duty vehicle fuel consumption in 2012, according to new information released on the U.S.
2013-02-15
Article
BIG Kaiser’s EWN 04-7 Series precision finish boring head, claimed to be the smallest such head on the market, is for use on micro-milling machines with high-speed spindles such as HSK-E25, E32, or E40.
2013-02-15
Article
Hitachi Metals has accelerated development of reduced-dysprosium NEOMAX series Nd-Fe-B sintered magnets enabled by DDMagic, a dysprosium vapor deposition diffusion technology.
2013-02-14
Article
Used for calibration and optimization, FEV’s MicroHiL is a virtual test cell environment in which a virtual engine model is connected to a real-time processing electronic control unit (ECU) through a series of sophisticated software and hardware interfaces.
2013-02-14
Article
Applus+ IDIADA’s torque vectoring system is a motion control module that distributes drive torque between the vehicle’s individual wheels depending on the driver’s inputs and road conditions.
2013-02-14
Article
Using Reflex gate driver technology, TM4’s CO150 motor controller for electric and hybrid vehicles enables improved current densities.
2013-02-14
Article
SpaceClaim Engineer 3-D direct modeling software from SpaceClaim offers solid modeling for engineers and analysts working in 3-D but without expertise in traditional feature-based CAD.
Viewing 3331 to 3360 of 10229