Criteria

Text:
Sector:
Content:
Display:

Results

Viewing 4951 to 4980 of 5215
2010-03-08
Article
Formability results from Onward Technologies have successfully predicted dent resistance to optimize weight of exterior panels and offer an improved prediction of the physical part’s behavior during testing.
2010-03-08
Article
At the 2010 SAE World Congress, Scuderi will show the latest iteration of its split-cycle engine prototype which is currently under test at Southwest Research Institute.
2010-03-09
Article
REM Surface Engineering’s Rapid ISF (Isotropic Superfinish) process for rear-axle hypoid gear sets provides the benefits of greater efficiency, as well as reduced friction, wear, and operating temperatures, via a high-speed drag-finishing production process.
2010-03-15
Article
Shinhan Precision’s stamped fine blanking press technology is used to create a clutch piston for Magna Powertrain that replaces its current powder metal component.
2012-07-24
Article
New market research indicates a promising future for electric vehicle batteries. The study has predicted a growth of 25.2% CAGR in the Global Hybrid Electric Vehicle (HEV) battery market by 2015, due in part to such factors as increased environmental concern and a growing need for energy independence.
2013-05-09
Article
W. L. Gore & Associates’ Series AVS 41 (P/N VE2048) vents for powertrain/driveline applications provide continuous airflow to equalize internal pressure, thus improving reliability by reducing vacuum and premature failure of housing seals, according to the company.
2014-03-07
Article
Targeted at the technical user, this book covers the increasingly critical topic of measuring particulate emissions among many other vital subjects.
2010-04-23
Article
Freudenberg-NOK’s energy saving seal (ESS) is designed to reduce friction-related energy losses by up to 25% compared with conventional radial shaft seals.
2011-09-10
Article
TI Automotive provides a high-performance aftermarket version of its dual-channel, single-stage (DCSS) 39/50 fuel pump for engines with more than 500 hp (373 kW).
2016-11-15
Article
Freudenberg Sealing Technologies has expanded its LESS (Low Emission Sealing Solution) lineup to include new products designed to address challenges associated with powertrain friction, smaller spaces, lighter weight vehicles and growth in the electric mobility vehicle arena.
2017-02-10
Article
Designed for lighter weight, smaller space and lower cost than gear drives, BorgWarner’s silent chains technology provides durable performance, even under high speeds typical in hybrid applications.
2014-03-21
Article
AGC Chemicals Americas Inc.’s new Sunbesta-ZV multi-layer fuel hose features a three-layer tubing system, making them highly resistant to temperature, chemicals, and fuels, and are free of oligomers, claims the company.
2009-11-02
Article
Using the 1608 module, Sciemetric Instruments’ expanded modular sigPOD hardware platform supports up to 24 analog channels and six encoder input channels.
2010-03-16
Article
Stress homogenization is achieved throughout Mubea's fiber-composite coil springs that are made via a new coiling program and a high-performance production process.
2015-10-29
Article
Mahle claims to deliver improved top piston rings using a new CrN-based thermal spray coating for gasoline turbocharged DI engines.
2009-09-17
Article
Sunnen’s TC tool is custom-engineered for honing small two-stroke-cycle engine cylinders to overcome production challenges, including blind, ported, and tapered bores, and hard surface coatings, such as Nikasil and chrome plating.
2010-12-27
Article
Baumer offers a series of inductive sensors for use in limited-space distance measurement and positioning applications involving metal targets.
2013-06-19
Article
Through its parent company Graebener Maschinentechnik, Graebener-Reika Inc. (GRI) offers a four-column hydroforming press suitable for high-volume environments such as the automotive industry.
2014-03-10
Article
The Objet500 Connex3 color multi-material 3-D printer from Stratasys is the first and only 3-D printer to combine colors with multi-material 3-D printing, according to the company.
2011-07-07
Article
The pneumatically powered Famatec Friendly ergonomic manipulator from Haeco precisely counterbalances heavy loads to allow an operator to suspend, rotate, tilt, and transfer product with precision.
2013-03-28
Article
For precision, productivity, and process integrity with complex components, EMAG offers vertical turning machines for the high-yield production environment.
2009-07-14
Article
The Axis series from Dispense Works is an automated filling system designed to fill greases and pastes into cavities and onto components to very accurate and repeatable volumes.
2009-07-08
Article
Norwood Marking Systems / Kingsley Machine’s programmable thermal printing, measuring, and cutting system prints on both sides of heat-shrink sleeving or flexible tubing simultaneously.
2009-02-10
Article
Hess Industries designs, engineers, and manufactures part-straightening solutions.
2009-02-10
Article
The Lee Company introduces a miniature, self-retained, calibrated IMH insert orifice for liquids and gases.
2013-08-05
Article
Arnite A-X07455 from Royal DSM is the first high-performance polyethylene terephthalate (PET) engineering plastic that is highly resistant to hydrolysis, the company claims.
2012-06-22
Article
NanoSteel’s new advanced high-strength steels (AHSS) feature a combination of high strength and high ductility for automotive structures.
2009-07-20
Article
Rockwell Automation offers free downloadable application development software to allow users to create, modify, and monitor application programs for Allen-Bradley MicroLogix controllers.
2011-01-17
Article
StrataLiner NET composite board technology from the Woodbridge Group provides high levels of material property and product performance for composite board-based products such as automotive headliners.
2008-12-02
Article
TandN Products features the NASCAR-approved Saf to GO lug nut that indicates when it is safely snug to the wheel.
Viewing 4951 to 4980 of 5215