Criteria

Text:
Sector:
Content:
Display:

Results

Viewing 91 to 120 of 5079
2017-04-25
Article
SAE's Connect2Car Executive Leadership Forum is designed to promote high-level discussion of connectivity business models, technology insertion strategies and other issues concerning the fusion of the automotive and technology sectors.
2017-04-24
Article
Traditional beam-type drive axles as used in most pickups and full-size SUVs are simple, robust, relatively inexpensive—and a hefty chunk of cast-iron and steel. Benchmark axles for a typical ½-ton pickup weigh 180 lb (82 kg) each.
2017-04-20
Article
Exa Corp. is focusing on the vital and sometimes overlooked aspect of automated drivin: keeping onboard camera lenses and other sensor surfaces clean in all road conditions.
2017-04-20
Article
A new state-of-the-art wind tunnel beginning construction in Ohio in 2017 will add to Honda's growing R&D footprint in the U.S.
2017-04-20
Article
Possibly one of the most significant things to so far come out of Auto Shenghai 2017 was courtesy of Volkswagen with the introduction of the I.D. CROZZ concept—the company’s first electrically powered crossover utility vehicle (CUV) based off the new Modular Electric Drive Matrix (MEB).
2017-04-19
Article
The Puget Sound Clean Cars Stormwater Partnership is a collaborative research project concerning vehicle fluid leaks and storm water impacts.
2017-04-19
Article
Desire for quicker turnaround and more in-depth analysis point to increased automation of ECU testing.
2017-04-18
Article
With Kistler’s KiBox, information about combustion, injection valve actuation and ignition can be reliably captured, processed and viewed in the familiar INCA environment, among others.
2017-04-18
Article
KS Kolbenschmidt, a division of Rheinmetall Automotive, has refined its Liteks design for ultra-light, durable gasoline pistons.
2017-04-18
Article
The MicroTRICOR TCM-100 Coriolis mass flow meter from AW-Lake Company (Oak Creek, WI) is the smallest TRICOR Coriolis meter designed for the accurate measurement of very low flow rates.
2017-04-18
Article
The MX-Z series of laser markers from Omron provide high quality, permanent identification with what the company claims is superior flexibility in terms of marking and connectivity with the ability to integrate easily to other systems or controls.
2017-04-18
Article
dSPACE offers an additional Processing Unit for SCALEXIO hardware-in-the-loop (HIL) test systems.
2017-04-18
Article
OMEGA Engineering’s (Norwalk, CT) new OS758-LS handheld dual-laser infrared thermometer delivers reliable non-contact measurement for instant troubleshooting.
2017-04-17
Article
More on-board processing power is needed to enable the next generation of vehicle systems, said Dr. Holger Klein, ZF's Head of Car Chassis Technology.
2017-04-17
Article
Cabins with triple sealing, and EPA fuel economy credits promote use of recirculation position with outside air shut off. CO2 builds up well beyond 0.1% comfort level, says CalsonicKansei researcher at SAE WCX17.
2017-04-17
Article
Our HVAC expert dives deep into the Prius Prime PHEV and sees an ultra-compact refrigerant liquid-gas separator and sophisticated circuitry that operates in any of six modes.
2017-04-17
Article
Audi reveals details of the structural technology of its upcoming A8 as Audi and Porsche Chairmen pledge closer co-operation.
2017-04-13
Article
An aluminum-alloy body helps Lincoln cut 200 pounds from the new generation of its largest SUV.
2017-04-12
Article
Dodge claims scores of world-firsts and world records with the outlandishly-powered 2018 Challenger SRT Demon musclecar.
2017-04-11
Article
As Mercedes and Audi launch the new CO2 A/C refrigerant in production, members of Germany's VDA consortium ask for a compatible SAE standard during the SAE Interior Climate Control Committee meeting in April.
2017-04-10
Article
Ford's new Police Responder Hybrid is projected to deliver significant fuel-cost savings for police departments while maintaining rigorous-duty expectations.
2017-04-06
Article
For engineers looking to solve mind-boggling engineering challenges, the automotive sector is calling, the CTOs asserted.
2017-04-06
Article
The number of threats will increase rapidly as more vehicles are connected, and vulnerabilities on older vehicles will be in constant need of updating.
2017-04-06
Article
Connectivity promises to bring a wealth of information to drivers, but it also poses vexing privacy issues. Figuring out where to store all the data related to connectivity is also puzzling for service providers.
2017-04-06
Article
A new design-simulation process allows FCA engineers to cut 3-5% from the weight of a truck frame by identifying areas in which holes can be drilled without affecting durability or fatigue properties.
2017-04-06
Article
Low temperature combustion (LTC) remains an area of high interest with extensive research, even though many challenges must still be overcome before LTC sees commercial acceptance.
2017-04-05
Article
A car sharing study involving college students is providing Denso with feedback that could help the supplier develop new products.
2017-04-05
Article
Rather than limit itself to three-year product planning cycles, Freudenberg is also looking 35 years into the future to further drive its R&D work.
2017-04-05
Article
Former U.S. Secretary of Transportation Anthony Foxx weighs in at SAE's WCX17 conference regarding the automated-driving future, car-sharing and recall.
2017-04-05
Article
V2I proponents are pressing forward in a technology that they contend will become a mainstay for autonomous vehicles. As the technology matures, paying for a roadside infrastructure is becoming a key issue.
Viewing 91 to 120 of 5079