Article
Industrial CT scanning
2014-03-10
Jesse Garant & Associates (JG&A) Metrology Center offers industrial CT scanning focused on 3-D internal part inspection services using industrial computed tomography equipment.
Search Results
Article
Audi to increase laser-headlamp applications, says technology chief
2014-03-10
The company’s laser-diode high beams have three times the luminosity of LED-type high beams, but don't hit oncoming drivers like a Sci-Fi movie death ray.
Article
Car sticker not a good indicator of telematics performance, study says
2014-03-10
Article
Materials data for design and simulation
2014-03-10
Granta Design second-generation MI:Materials Gateway integration technology provides traceable access to materials data and applications within CAD, CAE, and PLM software.
Article
Cylinder bore surface testing
2014-03-10
NanoFocus’ μsurf cylinder tool, which will be displayed at the SAE 2014 World Congress April 8-10 in Detroit, provides a nondestructive technique for high-resolution 3-D measurements of the inside of cylinder bores and liners.
Article
Polypropylene rigid honeycomb board
2014-03-10
Stinger polypropylene rigid honeycomb-cored structural sheet from Coroplast will be displayed at SAE 2014 World Congress April 8-10 in Detroit.
Article
Kia pushes energy-density frontier with Soul EV battery
2014-03-09
Article
Ford moving some truck assembly from Mexico to U.S.
2014-03-07
Article
Urban concept vehicle
2014-03-07
The ishare urban concept vehicle by Applus IDIADA is designed as a demonstrator of the company’s vehicle-development capabilities.
Article
Automotive venting solutions
2014-03-07
Donaldson’s Automotive Venting Solutions, which offer a variety of materials and configurations to meet the needs of automotive system suppliers, will be displayed at the SAE 2014 World Congress April 8-10 in Detroit.
Article
New SAE book on engine emissions and testing equipment
2014-03-07
Targeted at the technical user, this book covers the increasingly critical topic of measuring particulate emissions among many other vital subjects.
Article
Elastomeric static seal
2014-03-07
Freudenberg-NOK Sealing Technologies offers a new elastomeric static seal as part of a global effort from its gaskets division.
Article
Batteries that don’t burn
2014-03-07
Potential lithium-ion battery electrolyte replacement being researched at the University of North Carolina-Chapel Hill is non-flammable.
Article
Functional rapid prototype parts
2014-03-07
Most rapid prototype parts are brittle or turn limp in warm water, and can only take engineers so far during development. Synergeering Group has developed a way for rapid prototype parts to be functional—on a running engine.
Article
Next steps for fuel cell technology
2014-03-07
Systems costs are coming down while fueling infrastructure is going up in key regions. But is fuel cell technology ready to provide a truly viable alternative to advanced ICEs and hybrids?
Article
Porsche ties sportscar label to its new Macan SUV
2014-03-06
The VW brand cascades its sportscar technology into the SUV to create a new vehicle sub-species.
Article
Integrated and Open Development Platform (IODP)
2014-03-06
AVL's Integrated and Open Development Platform highlighted at the SAE 2014 World Congress April 8-10 in Detroit.
Article
V2X communications face many challenges before deployment
2014-03-06
Mainstream media outlets heavily touted vehicle-to-vehicle/-infrastructure (referred to as V2X) communications after a recent NHTSA endorsement. Often overlooked are technical challenges that still must be overcome before V2X can make any real impact.
Article
Supplier makes the case for stamped-aluminum electronic-module case
2014-03-05
Stamped aluminum is shown to offer advantages in weight and cost over die-casting.
Article
GM’s Nitz gets new dual role of EV and Transmission Engineering director
2014-03-05
Formerly chief of hybrid and electric powertrain engineering, Nitz is now Executive Director, Global Transmissions and Electrification. His new role reflects the evolution of automotive transmission systems as their mechanical and electrical functionality converges.
