Ring assembly

  • 19-Apr-2011 03:25 EDT
fluid motor.jpg

Rotor Clip's TruWave wave springs and retaining rings were designed to conserve material and reduce design space in fluid power assemblies by combining the benefits of both. MST-series TruWave single-turn metric wave springs are available in sizes from 16 to 170 mm (0.63 to 6.7 in), can handle bearing preloads, and are suitable for short deflection applications. Traditional retaining rings repair the cover element and eliminate the need to weld or screw down the components, making the assembly easier to repair and service. The wave spring between the cover element and the inner tube preloads the components against each other; tolerances are balanced to prevent axial play. Additional features include potential overhead assembly and automatic installation, even load and force with small tolerances, and prevention of radial jamming.

Share
HTML for Linking to Page
Page URL
Grade
Rate It
0.00 Avg. Rating

Read More Articles On

2016-09-16
Manipulator position sensing is a key issue in the study of hydraulic excavator automation. A neural network-based vision system was developed to estimate the boom, arm, and bucket cylinder displacements of an excavator manipulator during a grading operation simulation.
2016-08-25
Autonomous driving and machine system automation continue to increase productivity and convenience in farm production.
2016-11-11
Baumer's inductive sensor technology measures a distance on a target with high speed and high precision, enabling equipment condition assessment.
2016-11-11
NOsparc arc suppressors from Arc Suppression Technologies are designed for both ac and dc power applications.

Related Items

Standard
2014-07-09
Standard
2013-05-03