Fire- and heat-resistant coating

  • 06-Jul-2010 12:13 EDT
Heat resistant coating.jpg

A high-performance fire- and heat-resistant coating from AkzoNobel Aerospace Coatings is now available in the global range. The coating, ref 64C1-2-A coating, is typically applied to aircraft engine nacelles, components, and assemblies that can be regularly exposed to temperatures up to 315°F but can survive peak exposure to 1500°F for 15 min. With good thermal stability and low thermal conductivity, this product is well suited for adhesive-bonded assemblies in high-temperature areas where adhesive deterioration might otherwise occur. The spray-on coating is applied directly onto the structure and can either be allowed to cure at room temperature or force cured. This makes it particularly useful for assemblies with complicated configurations at thicknesses up to 1 in or more. Another key property is its ability to provide backside wall temperature control (when applied to the backs of surfaces that are exposed to heat), even at low density. The coating is qualified to Boeing specification BMS 10-102, Type I, Class 1, Grade 25.

Author:
Sector:
Topic:
Share
HTML for Linking to Page
Page URL
Grade
Rate It
0.00 Avg. Rating

Read More Articles On

2016-12-20
Researchers from Iowa State University are expanding fundamental materials studies into research and development of new, all-solid-state technology for batteries.
2017-02-20
Researchers from Purdue University are studying the fundamental mechanisms behind a method that uses electrical fields to enhance ceramics-sintering processing, which could aid R&D of rechargeable lithium-ion batteries and fuel cells. The research also could shed light on a phenomenon called electromigration, which can affect the performance of electronic devices.
2016-10-20
The fusing of emerging technologies from the aerospace materials sector and biological sciences are now, for the first time, heading toward the prospect of growing parts, systems, and, ultimately, perhaps whole aircraft.
2016-10-22
There is a general consensus among experts that it will take vast advances in materials technology to meet future efficiency and emissions requirements that can truly only be speculated about today.

Related Items

Training / Education
2013-04-09
Training / Education
2013-04-09
Standard
2002-08-19
Training / Education
2013-04-09
Training / Education
2013-04-09
Technical Paper / Journal Article
2010-10-25
Standard
2003-03-19
Book
2012-11-01
Training / Education
2013-04-09