Axial piston pump

  • 29-Jun-2010 01:47 EDT
A4VG_series40.jpg

 

Bosch Rexroth has redesigned the high-pressure variable pump A4VG for closed circuit applications. With increased power density, the Series 40 helps mobile equipment manufacturers comply with stricter emissions regulations. The nominal pressure of the series has increased to 6500 psi (450 bar), and nominal parameters can counteract the reduced speed of the diesel engine and lower input flow rates. Nine nominal parameters provide a modular range of control units and enable a choice in axial piston pump with swashplate design for any application. The redesigned, flexible pump case can include various sensors, such as monitoring swivel angle, high pressure, and rotational speed. A bowl-shaped design avoids high-pressure transitions at sealing points. Rexroth also relocated the high-pressure ports to optimize arrangement of the hydraulic lines. If service is required, the series uses connections for the O-ring seals to ensure all threads are leak-tight.

Share
HTML for Linking to Page
Page URL
Grade
Rate It
4.00 Avg. Rating

Read More Articles On

2018-02-05
Thermal imaging data obtained from a FLIR high-performance camera shows that the expected turbine output temperature is approximately 285°C when the helicopter is in forward flight. However, during hover operations a steady state temperature of about 343°C will be reached.

Related Items

Article
2017-09-15
Article
2017-09-07
X