Chrysler optimizes process for steel selection, placement

  • 31-Mar-2008 05:51 EDT
TOPOLOGY45.jpg
By employing the CAE body structure optimization tool, a computer model shows the topology results. The proprietary process helps Chrysler engineers select steels according to what is needed and where.

Chrysler’s traditional approach to vehicle development has taken a detour as engineers recently started using new computer tools and an advanced engineering process as a means of designing safer, lighter automobiles.

“The old version was you’d design the major subassemblies first and then integrate those subassemblies into a total vehicle structure. In many cases, we’re able to get the same end results, but we can now refine a design to a level that we previously weren’t able to do,” said Thomas Seel, Chrysler’s Manager of Component Integration, Knowledge Based Engineering.

Using what is referred to as “bio-mimetic topology optimization” combined with a refined engineering process, engineers can determine which body-in-white zones have the highest strain. The process highlights the prime location for the various critical-load paths on the vehicle.

“Taking a holistic approach to body-in-white is similar to concurrent engineering because unlike an iterative solution, the engineering process is looking at all the load cases—durability, stiffness, and safety—simultaneously,” said Seel.

Advanced high-strength steels (AHSS) are part of the optimized body structure design process. “Drivers for AHSS include safety, mass control, fuel economy, and affordability,” said David Jeanes, Senior Vice President of Market Development for the American Iron and Steel Institute (AISI), whose member companies represent more than 75% of North America’s steel capacity.

By using this proprietary process, Chrysler engineers select steels according to what is needed. “It allows you to peel away weight where you don’t need it,” said Bill Grabowski, Director of Body Core Engineering at Chrysler. Chrysler officials predict that as much as 120 lb (54 kg) could be shed from the body-in-white—essentially equating to a 1% fuel-economy improvement—by optimizing the vehicle’s skeleton.

“If you know the load requirements of the vehicle, such as torsional rigidity, side impacts, and roof strength, then these new computer tools can work with the available load paths to identify what’s strong and what’s weak so that engineers can design a better structure,” said Ron Krupitzer, Vice President of AISI’s Automotive Applications Committee.

Load optimization also occurs at the component level. For instance, an advanced design of a future production vehicle—by virtue of AHSS topology optimization—resulted in a weight savings of 1.12 lb (0.51 kg) on a front shock tower. “We predict an up to 13% weight reduction of the entire body structure, resulting in improved fuel economy because of the bio-mimetic topology tools and the engineering process,” said Grabowski, who was making a comparison to vehicles using conventional high-strength steels and design methods.

Current Chrysler vehicles use approximately 20 to 30% high-strength steel in the bodies, “but in the next three to five years, Chrysler vehicles will apply upward of 60% high-strength steels,” Grabowski said, noting that as early as 2010 Chrysler vehicle bodies could be made of 29% high-strength low-alloy steel, 30% AHSS, and 41% mild steel.

AISI, Chrysler, Mercedes Group Research, and MB Tech (Mercedes-Benz Technologies) all contributed to developing the new topology tools and the engineering process, which helps “accelerate the use of new AHSS to optimize body structures,” said Jeanes.

Although Chrysler currently is using the topology-modeling tools and engineering process for body structures, the body-in-white is only the first application. “The tools and process are not limited to just the body structure,” Seel said, declining to elaborate.

Share
HTML for Linking to Page
Page URL
Grade
Rate It
3.83 Avg. Rating

Read More Articles On

2016-10-31
Despite rumors of an acquisition by Apple, McLaren is racing ahead on £1B in self-funded R&D and an ambitious plan to develop an electric supercar worthy of the name.
2017-03-13
In the ongoing design and engineering crusade that is vehicle lightweighting, grams count. In some cases, tenths of a gram count. Regardless of how fuel price has moderated in the U.S. in recent years, the importance of global platforms and global markets means the drive to create more mass-efficient vehicle structures, subassemblies and components continues unabated.
2017-02-11
Cab doors that open 180° thanks to a new hinge design are one innovative feature on the recently unveiled 2017 Titan King Cab model.
2017-02-07
Still riding on a separate hydroformed-steel ladder frame (itself redesigned and CAE-optimized for greater strength and lower mass), the new eight-passenger SUV sheds up to 300 lb (136 kg) compared with the incumbent model. The mass reduction enabled Ford engineers to move to a powertrain format using only the 3.5-L turbocharged V6 with auto stop-start and 10R80 10-speed automatic.

Related Items

Standard
1987-02-01
Standard
1966-08-01
Technical Paper / Journal Article
2010-09-28
Training / Education
2013-04-09
Training / Education
2013-04-09
Technical Paper / Journal Article
2010-10-19