CES rollouts extend connectivity, app integration

  • 06-Jan-2016 05:44 EST
aetrces2016Harman.jpg

Harman’s connectivity offerings give drivers plenty to do when they’re not driving.

The tightening links between autos and consumer electronics were in evidence at the 2016 Consumer Electronics Show in Las Vegas as several automakers and suppliers unveiled infotainment technologies. Connectivity and simplified app integration technologies were among the many transportation offerings at the monstrous show.

Vendors throughout the industry unveiled connectivity products. An amplifier was among Harman’s connectivity offerings. It uses a customized microcontroller to provide connectivity, noise cancellation, equalization, and surround sound. That trims size and complexity significantly.

“The Summit Connected Amplifier is the first system based on our system-on-chip technology,” said John Fitzgerald, ‎Senior Vice President of Harman’s Branded Audio Division. “Its functionality would traditionally require four to five digital signal processors and a microprocessor.”

Toyota unveiled a connected vehicle framework based on a Data Communication Module that will become a globally uniform technology by 2019. This standardized architecture will replace a handful of technologies now used in various regions.

In one of many phone-related moves, Toyota also teamed with Ford in hopes of making Ford’s open source SmartDeviceLink (SDL) a standard technology for apps. SDL makes it easier to create smartphone apps that match each company’s in-car system characteristics and interface, much like Apple CarPlay and Android Auto.

Suppliers QNX Software and UIEvolution also announced SDL support. While multiple players adopted Ford’s open-source technology, Ford expanded its app connectivity options by opting to deploy Apple CarPlay and Android Auto on its 2017 vehicles.

Broadcom supported another app-related technology, announcing a near field communication (NFC) controller. NFC is the smart-phone technology that lets users swipe phones to make payments and perform other actions. In vehicles, it could simplify Bluetooth pairing and let drivers transmit information from phones to the vehicle’s navigation system.

“When you’re driving and want to launch an address, you want to be able to just wave the phone past the nav system, not keep positioning it so the coils are aligned,” said Richard Barrett, Director of Automotive Connectivity at Broadcom. “We’ve doubled the drive current coming into the coils, which means you don’t have to as close for the two coils to start sharing information.”

NXP made a loosely related CES announcement. After unveiling an automotive-grade NFC chip in March, NXP extended its commitment with NFC technology targeted for smart-home systems.

Market researchers say NFC usage is skyrocketing. Shipments of NFC-enabled phones were projected to increase to 756 million in 2015, up more than 70% from 2014, according to IHS Technology.

“This is just starting to be pervasive in mobile phones,” Barrett said. “The vehicle industry is beginning to roll it out. 2019 and 2020 is when it will be more prevalent in cars.”

Harman also broadened its software offerings, teaming up with Microsoft to put the Microsoft Productivity Suite on some of Harman’s infotainment systems. Drivers will be able to set up Skype calls, schedule meetings, and listen to e-mail or texts. Microsoft tool users will also be leveraging the cloud.

“This spans embedded through cloud-based technologies; it can go through a smart phone or use embedded connectivity,” said Phil Eyler, President of Harman’s Connected Car Division. “This is not exclusively embedded.”

Share
HTML for Linking to Page
Page URL
Grade
Rate It
3.75 Avg. Rating

Read More Articles On

2016-08-16
Get ready for the “pod” car: Ford announced today that it intends to mass-produce a driverless, fully autonomous vehicle for commercial ride-sharing or ride-hailing service in 2021. The vehicle apparently will be the embodiment of today’s notion of the driverless-vehicle extreme: it will have no steering wheel, brake or accelerator pedals, said president and CEO Mark Fields during the announcement at the company’s Palo Alto, CA, research campus.
2016-09-06
Model ASUH miniature hybrid high-integrity pressure transducer from KA Sensors is designed for use in rugged environments from -65 to +300ºF (-54 to +149ºC) and vibration levels of more than 20 g.
2016-09-01
Time of flight (ToF) cameras are ready to let drivers control some of the many options of today’s infotainment systems with a mere wave of their hand. ToF-based systems can also monitor drivers to see if they’re drowsy or not watching roadways.
2016-09-20
While OEMs wait for NHTSA's V2X mandate they are discussing whether broad usage can be achieved without regulations.

Related Items

Technical Paper / Journal Article
2010-10-25
Article
2016-11-15
Article
2016-09-06
Book
2013-12-16
Training / Education
2007-03-01
Training / Education
2010-03-15