SAKOR develops 'spacecraft emulator' to test Dream Chaser control system

  • 29-Jul-2015 02:16 EDT
3 components.jpg

SAKOR built a sophisticated test system (shown) to exercise the new control system and simulate flight from atmospheric interface to landing on the Dream Chaser spacecraft.

SAKOR Technologies, Inc. has supplied a test system to Southwest Research Institute (SwRI) to be used to test the atmospheric flight control system for the Dream Chaser, a reusable lifting-body spacecraft, capable of either crewed or uncrewed flight and horizontal landing on a runway. Owned and operated by Sierra Nevada Corp. (SNC), the Dream Chaser is designed as a multi-mission space utility vehicle for low-Earth orbit.

Contracted by SNC to design and build the atmospheric flight control system, SwRI selected SAKOR to build a sophisticated system to exercise the Dream Chaser spacecraft’s new control system and simulate flight from atmospheric interface to landing. The system characterizes overall design performance as well as dynamic response to physical forces typically experienced in standard and extreme flight conditions.

SAKOR developed the test system over the course of a year, from development of initial test specifications through system delivery. The work was completed as part of a parallel engineering process: SAKOR was building the test system while SwRI was engineering the flight control system.

The Dream Chaser spacecraft features seven control surfaces and the new test system features seven dynamometers, each simulating dynamic loads on a specific control surface.

SAKOR’s DynoLAB data acquisition and control system controls the entire test stand, acting as a spacecraft emulator. Sending test profiles to the atmospheric flight controller as well as simulating force feedback from each control surface, DynoLAB communicates directly with the atmospheric flight control system via a MIL-STD-1553B avionics bus, which is a built-in capability of the DynoLAB system and is widely used in military aircraft and satellites.

“The test system is very complex, consisting of seven independent dynamometers that simulate the control surfaces of the spacecraft. It is among the most complicated we have developed,” Randal Beattie, President of SAKOR, shared with Aerospace Engineering.

The system uses “quite a bit of off-the-shelf technology,” he noted—most notably the DynoLAB system. “DynoLAB has all the capabilities necessary to run the system and perform the required calculations. Developing such a software system from scratch would have taken a year or more; with DynoLAB, SAKOR could offer built-in capabilities needed to run the dynamometers without additional software development.

“The dynamometers themselves needed to be very powerful for their size and have very fast response,” Beattie added. “SAKOR selected specific motors designed for this challenge. The combination of power and dynamic response was particularly challenging.”

SAKOR worked closely with SwRI and SNC to determine the requirements for connectors and wiring certified for space flight in a vacuum, he said. The company also collaborated with aerospace vendors to research and select the proper components for the project; many components had to be rated for working in a difficult and challenging simulated space environment.

Another challenge was that the test system had to simulate both static and highly dynamic forces on the aircraft. “These include high speed fluctuations and highly dynamic load variations, including buffeting and turbulence that affects the vehicle upon reentry. Ensuring the stability of the control system under these highly dynamic conditions is of crucial importance,” Beattie shared. “So, in addition to static tests and simulations, the test system must be able to prove the flight control system can respond to and withstand high dynamic forces.”

The test system also had to be mobile, so it could be used in conjunction with a large vacuum chamber, thermal chamber, and vibration system.

SwRI is currently successfully testing the control system design, according to Beattie: “The test system is functioning exactly as specified.”

SAKOR has done “a significant amount of work” in the automotive, hybrid-electric and electric vehicle, motorsports, military, and commercial vehicle segments, he noted, adding that “the work done on this project is directly translatable to all segments of the transportation industry.”

HTML for Linking to Page
Page URL
Rate It
4.00 Avg. Rating

Read More Articles On

Deemed "the first" 3D printed metal radio frequency filter for use in a telecommunications satellite, the filter, a culmination of the research funded by the European Space Agency, was created using a direct-metal-printing process.
The 418th Flight Test Squadron at Edwards Air Force Base is currently assessing a new parachute for the Advanced Concept Ejection Seat II that will improve safety and expand the acceptable personal weight range of aircrew.
Eaton manufactured engine-driven pumps for the first flying MC-21 prototype and supplied additional system sub-components including thermal bypass valves, while Pratt & Whitney supplied its PW1000G GTF engine and Rockwell Collins, Honeywell, and Elbit supplies various avionics systems.
Engineers at NASA and Boeing are amongst the believers who foresee folding wings in-flight using advanced materials and technologies being a potential game-changer for future aircraft. The two organization have teamed to develop an actuation system that uses an SMA that will accomplish this goal using less complex, lighter, and more compact hardware than conventional systems.

Related Items

Training / Education
Training / Education