Turret lathe measurement

  • 22-Jun-2012 05:20 EDT
Kistler_Type_9129A_Cutting_Tool_Force.jpg

For critical manufacturing process monitoring requirements, Kistler introduces the Type 9129A three-component system designed to offer high-precision measurements of cutting tool machinery forces up to 8 kN when turning outside and inside turret lathe diameters. The modular Type 9129A system consists of a dynamometer with corrosion-resistant construction impenetrable to coolants and four three-component force sensors with outputs passed to a nine-way flange socket. The force sensors are mounted between the cover plate and two lateral base plates to minimize temperature errors and displacement, while ground isolation prevents electromagnetic interface and ground loop interference from compromising integrity. Compatible with industry disk-type turret cutting tool machinery, the Type 9129A is a suitable multicomponent force measurement device and mounts without accessories directly on a flat base plate.

Share
HTML for Linking to Page
Page URL
Grade
Rate It
0.00 Avg. Rating

Read More Articles On

2016-08-26
The push toward miniaturization in the electronics industry has left designers little or no room for test points, and the expansion of high frequency technologies has resulted in a growing need for test equipment that has the capability to verify these types of very small circuits.
2016-08-26
dSPACE and BTC Embedded Systems offer a solution that improves test depth for the real-time validation of safety-critical applications with extension of classical test methods, easier compliance with safety standards and optimal integration and cross-platform use.
2016-08-26
CNH Industrial and AVL researchers used simulation, test bench, and road testing of a demonstrator vehicle with a WHR system to show significantly reduced fuel consumption.
2016-12-07
Christopher Grundler, the Director of OTAQ for the U.S. EPA, answered questions about Phase 2 rule-making for heavy trucks, global harmonization of emissions regulations, and his outlook for a new national NOx standard. Grundler will be the featured speaker on opening day of the SAE 2017 Government/Industry Meeting taking place January 25-27 in Washington D.C.

Related Items

Standard
2014-07-09
Training / Education
2005-08-23
Technical Paper / Journal Article
2013-04-08
Training / Education
2013-04-09
Training / Education
2011-04-12
Technical Paper / Journal Article
2011-04-12
Article
2016-08-26
Technical Paper / Journal Article
2011-04-12